Skip to main content
Erschienen in:
Buchtitelbild

2011 | OriginalPaper | Buchkapitel

1. Contact Mechanics

verfasst von : Anthony C. Fischer-Cripps

Erschienen in: Nanoindentation

Verlag: Springer New York

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

There has been considerable recent interest in the mechanical characterisation of thin film systems and small volumes of material using depth-sensing indentation tests with either spherical or pyramidal indenters. Usually, the principal goal of such testing is to extract elastic modulus and hardness of the specimen material from experimental readings of indenter load and depth of penetration. These readings give an indirect measure of the area of contact at full load, from which the mean contact pressure, and thus hardness, may be estimated. The test procedure, for both spheres and pyramidal indenters, usually involves an elastic–plastic loading sequence followed by an unloading. The validity of the results for hardness and modulus depends largely upon the analysis procedure used to process the raw data. Such procedures are concerned not only with the extraction of modulus and hardness, but also with correcting the raw data for various systematic errors that have been identified for this type of testing.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Fußnoten
1
In this section only, δ is the indentation depth measured from the contact circle, not below the original free surface.
 
Literatur
1.
Zurück zum Zitat H. Hertz, “On the contact of elastic solids,” J. Reine Angew. Math. 92, 1881, pp. 156–171. Translated and reprinted in English in Hertz’s Miscellaneous Papers, Macmillan & Co., London, 1896, Ch. 5. H. Hertz, “On the contact of elastic solids,” J. Reine Angew. Math. 92, 1881, pp. 156–171. Translated and reprinted in English in Hertz’s Miscellaneous Papers, Macmillan & Co., London, 1896, Ch. 5.
2.
Zurück zum Zitat H. Hertz, “On hardness,” Verh. Ver. Beförderung Gewerbe Fleisses 61, 1882, p. 410. Translated and reprinted in English in Hertz’s Miscellaneous Papers, Macmillan & Co, London, 1896, Ch. 6. H. Hertz, “On hardness,” Verh. Ver. Beförderung Gewerbe Fleisses 61, 1882, p. 410. Translated and reprinted in English in Hertz’s Miscellaneous Papers, Macmillan & Co, London, 1896, Ch. 6.
3.
Zurück zum Zitat S. Timoshenko and J.N. Goodier, Theory of Elasticity, 2nd Ed. McGraw-Hill, N.Y. 1951.MATH S. Timoshenko and J.N. Goodier, Theory of Elasticity, 2nd Ed. McGraw-Hill, N.Y. 1951.MATH
4.
Zurück zum Zitat A.C. Fischer-Cripps, “The use of combined elastic modulus in the analysis of depth sensing indentation data,” J. Mater. Res. 16 11, 2001, pp. 3050–3052.CrossRef A.C. Fischer-Cripps, “The use of combined elastic modulus in the analysis of depth sensing indentation data,” J. Mater. Res. 16 11, 2001, pp. 3050–3052.CrossRef
5.
Zurück zum Zitat M.M. Chaudhri, “A note on a common mistake in the analysis of nanoindentation test data”, J. Mater. Res. 16 2, 2001, pp. 336–339.CrossRef M.M. Chaudhri, “A note on a common mistake in the analysis of nanoindentation test data”, J. Mater. Res. 16 2, 2001, pp. 336–339.CrossRef
6.
Zurück zum Zitat A.C. Fischer-Cripps, “The use of combined elastic modulus in depth-sensing indentation with a conical indenter,” J. Mat. Res. 18 5, 2003, pp.1043–1045.CrossRef A.C. Fischer-Cripps, “The use of combined elastic modulus in depth-sensing indentation with a conical indenter,” J. Mat. Res. 18 5, 2003, pp.1043–1045.CrossRef
7.
Zurück zum Zitat Y.P. Cao, M. Dao, J. Lu, “A precise correcting method for the study of the superhard material using nanoindentation tests,” J. Mater. Res. 22 5, 2007, pp. 1255–1264.CrossRef Y.P. Cao, M. Dao, J. Lu, “A precise correcting method for the study of the superhard material using nanoindentation tests,” J. Mater. Res. 22 5, 2007, pp. 1255–1264.CrossRef
9.
Zurück zum Zitat J.R. Barber and D.A. Billings, “An approximate solution for the contact area and elastic compliance of a smooth punch of arbitrary shape,” Int. J. Mech. Sci. 32 12, 1990, pp. 991–997.CrossRefMATH J.R. Barber and D.A. Billings, “An approximate solution for the contact area and elastic compliance of a smooth punch of arbitrary shape,” Int. J. Mech. Sci. 32 12, 1990, pp. 991–997.CrossRefMATH
10.
Zurück zum Zitat G.G. Bilodeau, “Regular pyramid punch problem,” J. App. Mech. 59, 1992, pp. 519–523.CrossRefMATH G.G. Bilodeau, “Regular pyramid punch problem,” J. App. Mech. 59, 1992, pp. 519–523.CrossRefMATH
11.
Zurück zum Zitat P.-L. Larsson, A.E. Giannakopolous, E. Soderlund, D.J. Rowcliffe and R. Vestergaard, “Analysis of Berkovich Indentation,” Int. J. Structures, 33 2, 1996, pp.221–248.CrossRefMATH P.-L. Larsson, A.E. Giannakopolous, E. Soderlund, D.J. Rowcliffe and R. Vestergaard, “Analysis of Berkovich Indentation,” Int. J. Structures, 33 2, 1996, pp.221–248.CrossRefMATH
12.
Zurück zum Zitat A.C. Fischer-Cripps, Introduction to Contact Mechanics, 2nd Ed. Springer-Verlag, New York, 2007.CrossRefMATH A.C. Fischer-Cripps, Introduction to Contact Mechanics, 2nd Ed. Springer-Verlag, New York, 2007.CrossRefMATH
13.
Zurück zum Zitat D. Tabor, The Hardness of Metals, Clarendon Press, Oxford, 1951. D. Tabor, The Hardness of Metals, Clarendon Press, Oxford, 1951.
14.
Zurück zum Zitat F. Auerbach, “Absolute hardness,” Ann. Phys. Chem. (Leipzig) 43, 1891, pp.61–100. Translated by C. Barus, Annual Report of the Board of Regents of the Smithsonian Institution, July 1, 1890 – June 30 1891, reproduced in “Miscellaneous documents of the House of Representatives for the First Session of the Fifty-Second Congress,” Government Printing Office, Washington, D.C., 43, 1891–1892, pp.207–236.CrossRef F. Auerbach, “Absolute hardness,” Ann. Phys. Chem. (Leipzig) 43, 1891, pp.61–100. Translated by C. Barus, Annual Report of the Board of Regents of the Smithsonian Institution, July 1, 1890 – June 30 1891, reproduced in “Miscellaneous documents of the House of Representatives for the First Session of the Fifty-Second Congress,” Government Printing Office, Washington, D.C., 43, 1891–1892, pp.207–236.CrossRef
15.
Zurück zum Zitat E. Meyer, “Untersuchungen über Harteprufung und Harte,” Phys. Z. 9, 1908, pp. 66–74. E. Meyer, “Untersuchungen über Harteprufung und Harte,” Phys. Z. 9, 1908, pp. 66–74.
16.
Zurück zum Zitat S.L. Hoyt, “The ball indentation hardness test,” Trans. Am. Soc. Steel Treat. 6, 1924, pp. 396–420. S.L. Hoyt, “The ball indentation hardness test,” Trans. Am. Soc. Steel Treat. 6, 1924, pp. 396–420.
17.
Zurück zum Zitat M.C. Shaw, “The fundamental basis of the hardness test,” in The Science of Hardness Testing and its Research Applications, J.H. Westbrook and H. Conrad, Eds. American Society for Metals, Cleveland, OH, 1973, pp. 1–15. M.C. Shaw, “The fundamental basis of the hardness test,” in The Science of Hardness Testing and its Research Applications, J.H. Westbrook and H. Conrad, Eds. American Society for Metals, Cleveland, OH, 1973, pp. 1–15.
18.
Zurück zum Zitat M.V. Swain and J.T. Hagan, “Indentation plasticity and the ensuing fracture of glass,” J. Phys. D: Appl. Phys. 9, 1976, pp. 2201–2214.CrossRef M.V. Swain and J.T. Hagan, “Indentation plasticity and the ensuing fracture of glass,” J. Phys. D: Appl. Phys. 9, 1976, pp. 2201–2214.CrossRef
19.
Zurück zum Zitat M.T. Huber, “Contact of solid elastic bodies,” Ann. D. Physik, 14 1, 1904, pp. 153–163.CrossRefMATH M.T. Huber, “Contact of solid elastic bodies,” Ann. D. Physik, 14 1, 1904, pp. 153–163.CrossRefMATH
20.
Zurück zum Zitat A.C. Fischer-Cripps, “Elastic–plastic response of materials loaded with a spherical indenter,” J. Mater. Sci. 32 3, 1997, pp. 727–736.CrossRef A.C. Fischer-Cripps, “Elastic–plastic response of materials loaded with a spherical indenter,” J. Mater. Sci. 32 3, 1997, pp. 727–736.CrossRef
21.
Zurück zum Zitat S.Dj. Mesarovic and N. A. Fleck, “Spherical indentation of elastic–plastic solids,” Proc. R. Soc. A455, 1999, pp. 2707–2728. S.Dj. Mesarovic and N. A. Fleck, “Spherical indentation of elastic–plastic solids,” Proc. R. Soc. A455, 1999, pp. 2707–2728.
22.
Zurück zum Zitat R. Hill, E.H. Lee and S.J. Tupper, “Theory of wedge-indentation of ductile metals,” Proc. R. Soc. A188, 1947, pp. 273–289.CrossRefMathSciNet R. Hill, E.H. Lee and S.J. Tupper, “Theory of wedge-indentation of ductile metals,” Proc. R. Soc. A188, 1947, pp. 273–289.CrossRefMathSciNet
23.
Zurück zum Zitat R. Hill, The Mathematical Theory of Plasticity, Clarendon Press, Oxford, 1950.MATH R. Hill, The Mathematical Theory of Plasticity, Clarendon Press, Oxford, 1950.MATH
24.
Zurück zum Zitat D.M. Marsh, “Plastic flow in glass,” Proc. R. Soc. A279, 1964, pp. 420–435.CrossRef D.M. Marsh, “Plastic flow in glass,” Proc. R. Soc. A279, 1964, pp. 420–435.CrossRef
25.
Zurück zum Zitat L.E. Samuels and T.O. Mulhearn, “An experimental investigation of the deformed zone associated with indentation hardness impressions,” J. Mech. Phys. Solids, 5, 1957, pp. 125–134.CrossRef L.E. Samuels and T.O. Mulhearn, “An experimental investigation of the deformed zone associated with indentation hardness impressions,” J. Mech. Phys. Solids, 5, 1957, pp. 125–134.CrossRef
26.
Zurück zum Zitat T.O. Mulhearn, “The deformation of metals by Vickers-type pyramidal indenters,” J. Mech. Phys. Solids, 7, 1959, pp. 85–96.CrossRef T.O. Mulhearn, “The deformation of metals by Vickers-type pyramidal indenters,” J. Mech. Phys. Solids, 7, 1959, pp. 85–96.CrossRef
27.
Zurück zum Zitat K.L. Johnson, “The correlation of indentation experiments,” J. Mech. Phys. Sol. 18, 1970, pp. 115–126.CrossRef K.L. Johnson, “The correlation of indentation experiments,” J. Mech. Phys. Sol. 18, 1970, pp. 115–126.CrossRef
28.
Zurück zum Zitat M.C. Shaw and D.J. DeSalvo, “A new approach to plasticity and its application to blunt two dimension indenters,” J. Eng. Ind. Trans. ASME, 92, 1970, pp. 469–479.CrossRef M.C. Shaw and D.J. DeSalvo, “A new approach to plasticity and its application to blunt two dimension indenters,” J. Eng. Ind. Trans. ASME, 92, 1970, pp. 469–479.CrossRef
29.
Zurück zum Zitat M.C. Shaw and D.J. DeSalvo, “On the plastic flow beneath a blunt axisymmetric indenter,” J. Eng. Ind. Trans. ASME 92, 1970, pp. 480–494.CrossRef M.C. Shaw and D.J. DeSalvo, “On the plastic flow beneath a blunt axisymmetric indenter,” J. Eng. Ind. Trans. ASME 92, 1970, pp. 480–494.CrossRef
30.
Zurück zum Zitat C. Hardy, C.N. Baronet, and G.V. Tordion, “The elastic–plastic indentation of a half-space by a rigid sphere,” Int. J. Numer. Methods Eng. 3, 1971, pp. 451–462.CrossRef C. Hardy, C.N. Baronet, and G.V. Tordion, “The elastic–plastic indentation of a half-space by a rigid sphere,” Int. J. Numer. Methods Eng. 3, 1971, pp. 451–462.CrossRef
31.
Zurück zum Zitat C.M. Perrott, “Elastic–plastic indentation: Hardness and fracture,” Wear 45, 1977, pp. 293–309.CrossRef C.M. Perrott, “Elastic–plastic indentation: Hardness and fracture,” Wear 45, 1977, pp. 293–309.CrossRef
32.
Zurück zum Zitat S.S. Chiang, D.B. Marshall, and A.G. Evans, “The response of solids to elastic/plastic indentation. 1. Stresses and residual stresses,” J. Appl. Phys. 53 1, 1982, pp. 298–311.CrossRef S.S. Chiang, D.B. Marshall, and A.G. Evans, “The response of solids to elastic/plastic indentation. 1. Stresses and residual stresses,” J. Appl. Phys. 53 1, 1982, pp. 298–311.CrossRef
33.
Zurück zum Zitat S.S. Chiang, D.B. Marshall, and A.G. Evans, “The response of solids to elastic/plastic indentation. 2. Fracture initiation,” J. Appl. Phys. 53 1, 1982, pp. 312–317.CrossRef S.S. Chiang, D.B. Marshall, and A.G. Evans, “The response of solids to elastic/plastic indentation. 2. Fracture initiation,” J. Appl. Phys. 53 1, 1982, pp. 312–317.CrossRef
34.
35.
Zurück zum Zitat J.H. Ahn and D. Kwon, “Derivation of plastic stress-strain relationship from ball indentations: Examination of strain definition and pileup effect,” J. Mater. Res. 16 11, 2001, pp. 3170–3178.CrossRef J.H. Ahn and D. Kwon, “Derivation of plastic stress-strain relationship from ball indentations: Examination of strain definition and pileup effect,” J. Mater. Res. 16 11, 2001, pp. 3170–3178.CrossRef
36.
Zurück zum Zitat J. Thurn, D.J. Morris, and R.F. Cook, “Depth-sensing indentation at macroscopic dimensions,” J. Mater. Res. 17 10, 2002, pp. 2679–2690.CrossRef J. Thurn, D.J. Morris, and R.F. Cook, “Depth-sensing indentation at macroscopic dimensions,” J. Mater. Res. 17 10, 2002, pp. 2679–2690.CrossRef
37.
Zurück zum Zitat F. Frölich, P. Grau, and W. Grellmann, “Performance and analysis of recording microhardness tests,” Phys. Stat. Sol. (a), 42, 1977, pp. 79–89.CrossRef F. Frölich, P. Grau, and W. Grellmann, “Performance and analysis of recording microhardness tests,” Phys. Stat. Sol. (a), 42, 1977, pp. 79–89.CrossRef
38.
Zurück zum Zitat J.B. Pethica, “Microhardness tests with penetration depths less than ion implanted layer thickness in ion implantation into metals,” Third International Conference on Modification of Surface Properties of Metals by Ion-Implantation, Manchester, England, 23-26, 1981, V. Ashworth et al. eds., Pergammon Press, Oxford, 1982, pp. 147–157. J.B. Pethica, “Microhardness tests with penetration depths less than ion implanted layer thickness in ion implantation into metals,” Third International Conference on Modification of Surface Properties of Metals by Ion-Implantation, Manchester, England, 23-26, 1981, V. Ashworth et al. eds., Pergammon Press, Oxford, 1982, pp. 147–157.
39.
Zurück zum Zitat J.S. Field, “Understanding the penetration resistance of modified surface layers,” Surface and Coatings Technology, 36, 1988, pp. 817–827.CrossRef J.S. Field, “Understanding the penetration resistance of modified surface layers,” Surface and Coatings Technology, 36, 1988, pp. 817–827.CrossRef
40.
Zurück zum Zitat N.A. Stilwell and D. Tabor, “Elastic recovery of conical indentations,” Phys. Proc. Soc. 78 2, 1961, pp. 169–179.CrossRefMathSciNet N.A. Stilwell and D. Tabor, “Elastic recovery of conical indentations,” Phys. Proc. Soc. 78 2, 1961, pp. 169–179.CrossRefMathSciNet
41.
Zurück zum Zitat R.W. Armstrong and W.H. Robinson, “Combined elastic and plastic deformation behaviour from a continuous indentation hardness test,” New Zealand Journal of Science, 17, 1974, pp. 429–433. R.W. Armstrong and W.H. Robinson, “Combined elastic and plastic deformation behaviour from a continuous indentation hardness test,” New Zealand Journal of Science, 17, 1974, pp. 429–433.
42.
Zurück zum Zitat B.R. Lawn and V.R. Howes, “Elastic recovery at hardness indentations,” J. Mat. Sci. 16, 1981, pp. 2745–2752.CrossRef B.R. Lawn and V.R. Howes, “Elastic recovery at hardness indentations,” J. Mat. Sci. 16, 1981, pp. 2745–2752.CrossRef
43.
Zurück zum Zitat S.I. Bulychev, V.P. Alekhin, M. Kh. Shorshorov, and A.P. Ternorskii, “Determining Young’s modulus from the indenter penetration diagram,” Zavod. Lab. 41 9, 1975, pp. 11137–11140. S.I. Bulychev, V.P. Alekhin, M. Kh. Shorshorov, and A.P. Ternorskii, “Determining Young’s modulus from the indenter penetration diagram,” Zavod. Lab. 41 9, 1975, pp. 11137–11140.
44.
Zurück zum Zitat J.L. Loubet, J.M. Georges, O. Marchesini, and G. Meille, “Vicker’s indentation of magnesium oxide,” J. Tribol. 106, 1984, pp. 43–48.CrossRef J.L. Loubet, J.M. Georges, O. Marchesini, and G. Meille, “Vicker’s indentation of magnesium oxide,” J. Tribol. 106, 1984, pp. 43–48.CrossRef
45.
Zurück zum Zitat M.F. Doerner and W.D. Nix, “A method for interpreting the data from depth-sensing indentation instruments,” J. Mater. Res. 1 4, 1986, pp. 601–609.CrossRef M.F. Doerner and W.D. Nix, “A method for interpreting the data from depth-sensing indentation instruments,” J. Mater. Res. 1 4, 1986, pp. 601–609.CrossRef
46.
Zurück zum Zitat W.C. Oliver and G.M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” J. Mater. Res. 7 4, 1992, pp. 1564–1583.CrossRef W.C. Oliver and G.M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” J. Mater. Res. 7 4, 1992, pp. 1564–1583.CrossRef
47.
Zurück zum Zitat T.J. Bell, A. Bendeli, J.S. Field, M.V. Swain, and E.G. Thwaite, “The determination of surface plastic and elastic properties by ultra-micro indentation,” Metrologia, 28, 1991, pp. 463–469.CrossRef T.J. Bell, A. Bendeli, J.S. Field, M.V. Swain, and E.G. Thwaite, “The determination of surface plastic and elastic properties by ultra-micro indentation,” Metrologia, 28, 1991, pp. 463–469.CrossRef
48.
Zurück zum Zitat J.S. Field and M.V. Swain, “A simple predictive model for spherical indentation,” J. Mater. Res. 8 2, 1993, pp. 297–306.CrossRef J.S. Field and M.V. Swain, “A simple predictive model for spherical indentation,” J. Mater. Res. 8 2, 1993, pp. 297–306.CrossRef
49.
Zurück zum Zitat A.C. Fischer-Cripps, “Study of analysis methods for depth-sensing indentation test data for spherical indenters,” J. Mater. Res. 16 6, 2001, pp. 1579–1584.CrossRef A.C. Fischer-Cripps, “Study of analysis methods for depth-sensing indentation test data for spherical indenters,” J. Mater. Res. 16 6, 2001, pp. 1579–1584.CrossRef
50.
Zurück zum Zitat A.G. Atkins, “Topics in indentation hardness,” Metal Science, 16, 1982, pp. 127–137.CrossRef A.G. Atkins, “Topics in indentation hardness,” Metal Science, 16, 1982, pp. 127–137.CrossRef
51.
Zurück zum Zitat H.M. Pollock, “Nanoindentation”, ASM Handbook, Friction, Lubrication, and Wear Technology, 18, 1992, pp. 419–429. H.M. Pollock, “Nanoindentation”, ASM Handbook, Friction, Lubrication, and Wear Technology, 18, 1992, pp. 419–429.
52.
Zurück zum Zitat J.L. Hay and G.M. Pharr, “Instrumented indentation testing,” ASM Handbook, Materials Testing and Evaluation, 8, 2000, pp. 232–243. J.L. Hay and G.M. Pharr, “Instrumented indentation testing,” ASM Handbook, Materials Testing and Evaluation, 8, 2000, pp. 232–243.
53.
Zurück zum Zitat S.A. Syed, K.J. Wahl, and R.J. Colton, “Quantitative study of nanoscale contact and pre-contact mechanics using force modulation,” Mat. Res. Soc. Symp. Proc. 594, 2000, pp. 471–476. S.A. Syed, K.J. Wahl, and R.J. Colton, “Quantitative study of nanoscale contact and pre-contact mechanics using force modulation,” Mat. Res. Soc. Symp. Proc. 594, 2000, pp. 471–476.
Metadaten
Titel
Contact Mechanics
verfasst von
Anthony C. Fischer-Cripps
Copyright-Jahr
2011
Verlag
Springer New York
DOI
https://doi.org/10.1007/978-1-4419-9872-9_1

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.