Weitere Artikel dieser Ausgabe durch Wischen aufrufen
Electrical resistivity is an important physical property of portland cement concrete which is directly related to chloride induced corrosion process. This study examined the electrical surface resistivity (SR) and bulk electrical resistivity (BR) of concrete cylinders for various binary and ternary based high-performance concrete (HPC) mixtures from 7 to 161 days. Two different types of instruments were utilized for this investigation and they were 4 point Wenner probe meter for SR and Merlin conductivity tester for bulk resistivity measurements. Chronological development of electrical resistivity as well as correlation between two types of resistivity on several days was established for all concrete mixtures. The ratio of experimental surface resistance to bulk resistance and corresponding resistivity was computed and compared with theoretical values. Results depicted that bulk and SR are well correlated for different groups of HPC mixtures and these mixtures have attained higher range of electrical resistivity for both types of measurements. In addition, this study presents distribution of surface and bulk resistivity in different permeability classes as proposed by Florida Department of Transportation (FDOT) specification from 7 to 161 days. Furthermore, electrical resistivity data for several HPC mixtures and testing procedure provide multiple promising options for long lasting bridge decks against chloride induced corrosion due to its ease of implementation, repeatability, non-destructive nature, and low cost.
Christensen, B. J., Coverdale, R. T., Olson, R. A., Ford, S. J., Garboczi, E. J., Jennings, H. M., et al. (1994). Impedance spectroscopy of hydrating cement based materials: Measurement, interpretation, and application. Journal of American Ceramic Society, 77(11), 2789–2804. CrossRef
Darren, T. Y., Lim, B., Sabet, D., Xu, D., & Susanto, T. (2011). Evaluation of High Performance Concrete Using Electrical Resistivity Technique. In proceedings of 36th Conference on our World in Concrete & Structures, Singapore, 14–16 August 2011.
FDOT Standard FM5-578. (2004). Florida method of test for concrete resistivity as an electrical indicator of its permeability. Florida Department of Transportation.
Icenogle, P. J., & Rupnow, T. D. (2012). Development of a precision statement for concrete surface resistivity. 92nd TRB Annual Meeting, Paper No. 12-1078, Washngton D.C., 23–26 Jan 2012.
Julio-Betancourt, G. A., & Hooton, R. D. (2004). Study of the joule effect on rapid chloride permeability values and evaluation of related electrical properties of concretes. Cement and Concrete Research, 34(1), 1007–1015. CrossRef
Katherine, K., Tinnea, J., Tinnea, R., Bellomio, S., Fanoni, M., Johnson, D., & Towns, J. (2010). High Electrical Resistivity Concrete Mixture Design Using Supplementary Cementitious Materials. In Proceedings of Second International Conference on Sustainable Construction Materials and Technologies, Università Politecnica delle Marche, Ancona, Italy, 28–30 June 2010.
Kessler, R. J., Powers, R. F. & Paredes, M. A. (2005). Resistivity measurements of water saturated concrete as an indicator of permeability, In Proceedings of NACE International Corrosion Conference. Houston, TX, Paper 5261, pp. 1–10.
Marriaga, J. L., Claisse, P., & Ganjian, E. (2010). Application of traditional techniques on chloride resistance assessment of GGBS concrete. In Proceedings of Second International Conference on Sustainable Construction Materials and Technologies, Università Politecnica delle Marche, Ancona, Italy, 28–30 June 2010.
Morris, W., Moreno, E. I., & Sagües, A. A. (1996). Practical evaluation of resistivity of concrete in test cylinders using a Wenner array probe. Cement and Concrete Research, 26(12), 1779–1787. CrossRef
Newlands, M. D., Jones, M. R., Kandasami, S., & Harrison, T. A. (2008). Sensitivity of electrode contact solutions and contact pressure in assessing electrical resistivity of concrete. Journal of Materials Structures, 41(5), 621–632. CrossRef
Paredes, M., Jackson, N. M., Safty, A. E., Dryden, J., Joson, J., Lerma, H., et al. (2012). Precision statements for the surface resistivity of water cured concrete cylinders in the laboratory. Advances in Civil Engineering Materials, 1(1), 1–23. CrossRef
Polder, R. B., Andrade, C., Elsener, B., Vennesland, Ø., Gulikers, J., Weidert, R., et al. (2004). Test methods for on-site measurement of resistivity of concrete. Materials and Structures, 33(10), 603–611. CrossRef
Rupnow, T. D., Schaefer, V. R., Wang, K., & Tikalsky, P. J. (2007). Effects of different air entraining agents (AEA), supplementary cementitious materials (SCM), and water reducing agent (WR) on the air void structure of fresh mortar, International Conference on Optimizing Paving Concrete Mixtures and Accelerated Concrete Pavement Construction and Rehabilitation, FHWA/ACI/ACPA, Nov 6–9, 2007.
Spragg, R. P., Castro, J., Nantung, T., Paredes, M., & Weiss, J. (2012). Variability analysis of the bulk resistivity measured using concrete cylinders. Advances in Civil Engineering Materials, 1(1), 1–17. CrossRef
Tikalsky, P., Taylor, P., Hanson, S., & Ghosh, P. (2011). Development of performance properties 1 of ternary mixtures: Laboratory study on concrete. Ames, IA: Iowa State University.
- Correlation Between Bulk and Surface Resistivity of Concrete
- Korea Concrete Institute
International Journal of Concrete Structures and Materials
Print ISSN: 1976-0485
Elektronische ISSN: 2234-1315