nach oben

Journal of Materials Engineering and Performance

Erschienen in:

09.10.2020

Corrosion Behaviors of Carbon Steel and Ni-Advanced Weathering Steel Exposed to Tropical Marine Atmosphere

verfasst von: Yueming Fan, Wei Liu, Zongteng Sun, Thee Chowwanonthapunya, Yonggang Zhao, Baojun Dong, Tianyi Zhang, Wongpat Banthukul, Xiaogang Li

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The corrosion behaviors of carbon steel and Ni-advanced weathering steel exposed to tropical marine atmosphere were investigated by using electrochemical impedance spectroscopy, x-ray diffraction, transmission electron microscope and x-ray photoelectron spectroscopy measurements. The results showed that Ni had almost no effect on corrosion kinetics and electrochemical performance of Ni-advanced weathering steel in mild atmosphere. Conversely, Ni-advanced weathering steel in marine atmosphere showed a significant superiority in improving corrosion resistance compared with carbon steel. Moreover, the mass formation of NiFe₂O₄ in the inner rust layer promoted the stability of the corrosion resistance improvement rate of Ni-advanced weathering steel with the increase in exposure time. Therefore, Ni-advanced weathering steel seemed to be more suitable for the harsh marine atmospheric environment.

Vorheriger Artikel High-Temperature Oxidation Resistance of CrMoN Films

Nächster Artikel High-Speed Impact Behavior and Microstructure Evolution of an Extruded Mg-7Sn-5Zn-3Al Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

I. Díaz, H. Cano, D. De la Fuente, B. Chico, J.M. Vega, and M. Morcillo, Atmospheric Corrosion of Ni-Advanced Weathering Steels in Marine Atmospheres of Moderate Salinity, Corros. Sci., 2013, 76, p 348–360CrossRef

X.H. Chen, J.H. Dong, E.H. Han, and W. Ke, Effect of Ni on the Ion-Selectivity of Rust Layer on Low Alloy Steel, Mater. Lett., 2007, 61, p 4050–4053CrossRef

Y.L. Zhou, J. Chen, Y. Xu, and Z.Y. Liu, Effects of Cr, Ni and Cu on the Corrosion Behavior of Low Carbon Microalloying Steel in a Cl⁻ Containing Environment, J. Mater. Sci. Technol., 2013, 29, p 168–174CrossRef

T. Nishimura and N. Rajendran, Nano Structure and Electrochemical Behavior of the Rust Formed on Ni Bearing Steel After Exposure Tests in a Tropical Indian Environment, Mater. Trans., 2014, 10, p 1547–1552CrossRef

I. Díaz, H. Cano, P. Lopesino, D. De la Fuente, B. Chico, J.A. Jiménez, S.F. Medina, and M. Morcillo, Five-Year Atmospheric Corrosion of Cu, Cr and Ni Weathering Steels in a Wide Range of Environments, Corros. Sci., 2018, 141, p 146–157CrossRef

T. Nishimura, H. Katayama, K. Noda, and T. Kodama, Effect of Co and Ni on the Corrosion Behavior of Low Alloy Steels in Wet/Dry Environments, Corros. Sci., 2000, 42, p 1611–1621CrossRef

G.Q. Fu, M.Y. Zhu, and X.L. Gao, Rust Layer Formed on Low Carbon Weathering Steels with Different Mn, Ni Contents in Environment Containing Chloride Ions, Mater. Sci., 2016, 22, p 501–505

I. Sugimoto and K. Kita, Evaluation of Applicability for Ni-Advanced Weathering Steels and Bridge High-Performance Steels to Railway Steel Bridges, Q. Rep. RTRI., 2010, 51, p 33–37CrossRef

N.S. Palsson, K. Wongpinkaew, P. Khamsuk, S. Sorachot, and W. Pongsaksawad, Outdoor Atmospheric Corrosion of Carbon Steel and Weathering Steel Exposed to the Tropical-Coastal Climate of Thailand, Mater. Corros., 2019, https://doi.org/10.1002/maco.201911340CrossRef

10.

H. Cano, D. Neff, M. Morcillo, P. Dillmann, I. Diaz, and D. De la Fuente, Characterization of Corrosion Products Formed on Ni 2.4 wt.%–Cu 0.5 wt.%–Cr 0.5 wt.% Weathering Steel Exposed in Marine Atmospheres, Corros. Sci., 2014, 87, p 438–451CrossRef

11.

X.Q. Cheng, Z. Jin, M. Liu, and X.G. Li, Optimizing the Nickel Content in Weathering Steels to Enhance Their Corrosion Resistance in Acidic Atmospheres, Corros. Sci., 2017, 115, p 135–142CrossRef

12.

W. Wu, X.Q. Cheng, H.X. Hou, B. Liu, and X.G. Li, Insight Into the Product Film Formed on Ni-Advanced Weathering Steel in a Tropical Marine Atmosphere, Appl. Surf. Sci., 2018, 436, p 80–89CrossRef

13.

X.G. Li, D.W. Zhang, Z.Y. Liu, Z. Li, C.W. Du, and C.F. Dong, Mater Sci: Share Corrosion Data, Nat. News., 2015, 527, p 441CrossRef

14.

M. Morcillo, B. Chico, I. Díaz, H. Cano, and D. De la Fuente, Atmospheric Corrosion Data of Weathering Steels, A Review, Corros. Sci., 2013, 77, p 6–24CrossRef

15.

Z. Wang, F. Yin, L. Wu, and L.H. Li, Corrosion Resistance on High Strength BAINITIC steel and 09CuPCrNi After Wet-Dry Cyclic Conditions, J. Iron. Steel Res. Int., 2013, 20, p 72CrossRef

16.

T. Nishimura, Electrochemical Behaviour and Structure of Rust Formed on Si-and Al-Bearing Steel After Atmospheric Exposure, Corros. Sci., 2010, 52, p 3609–3614CrossRef

17.

S. Hara, T. Kamimura, H. Miyuki, and M. Yamashita, Taxonomy for Protective Ability of Rust Layer Using Its Composition Formed on Weathering Steel Bridge, Corros. Sci., 2007, 49, p 1131–1142CrossRef

18.

Y.S. Choi and J.G. Kim, Aqueous Corrosion Behavior of Weathering Steel and Carbon Steel in acid-Chloride Environments, Corrosion, 2000, 56, p 1202–1210CrossRef

19.

Q.X. Li, Z.Y. Wang, W. Han, and E.H. Han, Characterization of the Rust Formed on Weathering Steel Exposed to Qinghai Salt Lake Atmosphere, Corros. Sci., 2008, 50, p 365–371CrossRef

20.

ISO 9223, Corrosion of Metals and Alloys, Corrosivity of Atmospheres-Classification (2012)

21.

X. Zhang, S.W. Yang, W.H. Zhang, H. Guo, and X.L. He, Influence of outer Rust Layers on Corrosion of Carbon Steel and Weathering Steel During Wet–Dry Cycles, Corros. Sci., 2014, 82, p 165–172CrossRef

22.

D.C. Kong, X.Q. Ni, C.F. Dong, X.W. Lei, L. Zhang, C. Man, J.Z. Yao, X.Q. Cheng, and X.G. Li, Bio-functional and Anti-corrosive 3D Printing 316L Stainless Steel Fabricated by Selective Laser Melting, Mater. Design., 2018, 152, p 88–101CrossRef

23.

Q.H. Zhao, W. Liu, Y.C. Zhu, B.L. Zhang, S.Z. Li, and M.X. Lu, Effect of Small Content of Chromium on Wet-Dry Acid Corrosion Behavior of Low Alloy Steel, Acta Metall. Sin., 2017, 30, p 164–175CrossRef

24.

D.C. Kong, C.F. Dong, X.G. Ni, L. Zhang, J.Z. Yao, C. Man, X.Q. Cheng, K. Xiao, and X.G. Li, Mechanical Properties and Corrosion Behavior of Selective Laser Melted 316L Stainless Steel After Different Heat Treatment Processes, J. Mater. Sci. Technol., 2019, 35, p 1499–1507CrossRef

25.

M. Yamashita, H. Konishi, J.I. Mizuki, and H. Uchida, Nanostructure of Protective Rust Layer on Weathering Steel Examined Using Synchrotron Radiation X-rays, Mater. Trans., 2004, 45, p 1920–1924CrossRef

26.

D.C. Kong, C.F. Dong, X.G. Ni, L. Zhang, H. Luo, R.X. Li, L. Wang, C. Man, and X.G. Li, Superior Resistance to Hydrogen Damage for Selective Laser Melted 316L Stainless Steel in a Proton Exchange Membrane Fuel Cell Environment, Corros. Sci., 2020, 166, p 108425CrossRef

27.

M. Morcillo, R. Wolthuis, J. Alcántara, B. Chico, I. Díaz, and D. De la Fuente, Scanning Electron Microscopy/Micro-Raman: A Very Useful Technique for Characterizing the Morphologies of Rust Phases Formed on Carbon Steel in Atmospheric Exposures, Corrosion, 2016, 72, p 1044–1054

28.

J.H. Dong, Rusting Evolution of Mn-Cu Alloying Steel in a Simulated Coastal Environment, Corros. Sci. Prot. Technol., 2010, 22, p 261–265

29.

D.C. Kong, X.Q. Ni, C.F. Dong, L. Zhang, C. Man, J.Z. Yao, K. Xiao, and X.G. Li, Heat Treatment Effect on the Microstructure and Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting for Proton Exchange Membrane Fuel Cells, Electrochim. Acta, 2018, 276, p 293–303CrossRef

30.

Z.Y. Cui, L.W. Wang, H.T. Ni, W.K. Hao, C. Man, S.S. Chen, X. Wang, Z.Y. Liu, and X.G. Li, Influence of Temperature on the Electrochemical and Passivation Behavior of 2507 Super Duplex Stainless Steel in Simulated Desulfurized Flue Gas Condensates, Corros. Sci., 2017, 118, p 31–48CrossRef

31.

Q. Hou, Z.Y. Liu, C.T. Li, and X.G. Li, Effects of Lead on Oxidation Behavior of Alloy 690TT Within a High Temperature Aqueous Environment, Appl. Surf. Sci., 2017, 426, p 514–526CrossRef

32.

L. Hao, S.X. Zhang, J.H. Dong, and W. Ke, Evolution of Corrosion of MnCuP Weathering Steel Submitted to Wet/Dry Cyclic Tests in a Simulated Coastal Atmosphere, Corros. Sci., 2012, 58, p 175–180CrossRef

33.

F. Corvo, N. Betancourt, and A. Mendoza, Outdoor–indoor Corrosion of Metals in Tropical Coastal Atmospheres, Corros. Sci., 1995, 37, p 1889CrossRef

34.

D. de la Fuente, I. Díaz, J. Simancas, B. Chico, and M. Morcillo, Long-Term Atmospheric Corrosion of Mild Steel, Corros. Sci., 2011, 53, p 604CrossRef

35.

L. Hao, S.X. Zhang, J.H. Dong, and W. Ke, Atmospheric Corrosion Resistance of MnCuP Weathering Steel in Simulated Environments, Corros. Sci., 2011, 53, p 4187–4192CrossRef

36.

H. Cano, I. Díaz, D. De la Fuente, B. Chico, and M. Morcillo, Effect of Cu, Cr and Ni Alloying Elements on Mechanical Properties and Atmospheric Corrosion Resistance of Weathering Steels in Marine Atmospheres of Different Aggressivities, Mater. Corros., 2018, 69, p 8–19CrossRef

37.

W. Ke and J.H. Dong, Study on the Rusting Evolution and the Performance of Resisting to Atmospheric Corrosion for Mn-Cu Steel, Acta Metall. Sin., 2010, 46, p 1365–1378CrossRef

38.

H. Tanaka, R. Mishima, N. Hatanaka, T. Ishikawa, and T. Nakayama, Formation of Magnetite Rust Particles by Reacting Iron Powder with Artificial α-, β-and γ-FeOOH in Aqueous Media, Corros. Sci., 2014, 78, p 384–387CrossRef

39.

J. Alcántara, B. Chico, J. Simancas, I. Díaz, and M. Morcillo, Marine Atmospheric Corrosion of Carbon Steel, A Review, Materials, 2017, 10, p 406CrossRef

40.

H. Tamura, The Role of Rusts in Corrosion and Corrosion Protection of Iron and Steel, Corros. Sci., 2008, 50, p 1872–1883CrossRef

41.

Y.M. Fan, W. Liu, S.M. Li, B. Wongpat, Y.G. Zhao, B.J. Dong, T.Y. Zhang, T. Chowwanonthapunya, and X.G. Li, Evolution of Rust Layers on Carbon Steel and Weathering Steel in High Humidity and Heat Marine Atmospheric Corrosion, J. Mater. Sci. Technol., 2020, 39, p 190CrossRef

42.

X.G. Feng, X.Y. Lu, Y. Zuo, N. Zhuang, and D. Chen, The Effect of Deformation on Metastable Pitting of 304 Stainless Steel in Chloride Contaminated Concrete Pore Solution, Corros. Sci., 2016, 103, p 223–229CrossRef

43.

M. Morcillo, B. Chico, D. De la Fuente, J. Alcántara, I.O. Wallinder, and C. Leygraf, On the Mechanism of Rust Exfoliation in Marine Environments, J. Electrochem. Soc., 2017, 164, p C8–C16CrossRef

44.

B. Liu, X. Mu, Y. Yang, L. Hao, X.Y. Ding, J.H. Dong, Z. Zhang, H.X. Hou, and W. Ke, Effect of Tin Addition on Corrosion Behavior of a Low-Alloy Steel in Simulated Costal-Industrial Atmosphere, J. Mater. Sci. Technol., 2019, 35, p 1228–1239CrossRef

Titel: Corrosion Behaviors of Carbon Steel and Ni-Advanced Weathering Steel Exposed to Tropical Marine Atmosphere
verfasst von: Yueming Fan
Wei Liu
Zongteng Sun
Thee Chowwanonthapunya
Yonggang Zhao
Baojun Dong
Tianyi Zhang
Wongpat Banthukul
Xiaogang Li
Publikationsdatum: 09.10.2020
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 10/2020
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-05153-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2020

Effects of Preheating and Cooling Rate on the Microstructure and Mechanical Properties of Tungsten Inert Gas Welded Joints of AA5083-H321 Aluminum Alloy

Interfacial Feature and Mechanical Property of Friction Stir Lap Repair Welded 7B04 Aluminum Alloy

Microstructural and Passivation Response of Severely Deformed AISI 304 Steel Surface: The Role of Surface Mechanical Attrition Treatment

Thermophysical-Based Modeling of Material Removal in Powder Mixed Near-Dry Electric Discharge Machining

Microstructure, Hardness and Corrosion Behavior of Gas Tungsten Arc Welding Clad Inconel 625 Super Alloy over A517 Carbon Steel Using ERNiCrMo3 Filler Metal

Production and Characterization of a Bone-Like Porous Ti/Ti-Hydroxyapatite Functionally Graded Material

Premium Partner

Marktübersichten