Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 2/2019

02.01.2019

Coupling a Cellular Automaton Model with a Finite Element Model for Simulating Deformation and Recrystallization of a Low-Carbon Micro-alloyed Steel During Hot Compression

verfasst von: Chuan Wu, Bing Jia, Shuang Han

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2019

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This study simulated the dynamic recrystallization (DRX) of a 2.25Cr-1Mo-0.25V steel by coupling a cellular automaton (CA) method with a finite element (FE) model. A secondary development program (SDP) on DEFORM-2D was carried out and the stress strain response, dislocation density evolution and DRX were considered. In this way, an interaction between the microstructural evolution and the deformation behavior can be taken into account. The values of temperature, strain and strain rate from the FE analysis were passed to the CA model. In turn, the recrystallized grain size and volume fraction of DRX predicted by the CA model were passed back to the FE model, which influenced the flow stress. To validate the SDP, the predicted loads and flow stress were compared with the experimental values, which show a good agreement. Then, the SDP program was used to simulate the microstructural evolution. Morphological characteristic, recrystallized grain size and volume fraction of DRX were predicted and compared with experimental data. The results show that the comparison is in a good agreement, which indicates the SDP is reliable.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat P.A.S. Pereira, C.S.G. Franco, J.L.M. Guerra-Filho, and D.S. dos Santos, Hydrogen Effects on the Microstructure of a 2.25Cr-1Mo-0.25V Steel Welded Joint, Int. J. Hydrogen. Energy., 2015, 40, p 17136–17143CrossRef P.A.S. Pereira, C.S.G. Franco, J.L.M. Guerra-Filho, and D.S. dos Santos, Hydrogen Effects on the Microstructure of a 2.25Cr-1Mo-0.25V Steel Welded Joint, Int. J. Hydrogen. Energy., 2015, 40, p 17136–17143CrossRef
2.
Zurück zum Zitat F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, 2004 F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, 2004
3.
Zurück zum Zitat H.Y. Li, J.D. Hu, D.D. Wei, X.F. Wang, and Y.H. Li, Artificial Neural Network and Constitutive Equations to Predict the Hot Deformation Behavior of Modified 2.25Cr-1Mo Steel, Mater. Des, 2012, 42, p 192–197CrossRef H.Y. Li, J.D. Hu, D.D. Wei, X.F. Wang, and Y.H. Li, Artificial Neural Network and Constitutive Equations to Predict the Hot Deformation Behavior of Modified 2.25Cr-1Mo Steel, Mater. Des, 2012, 42, p 192–197CrossRef
4.
Zurück zum Zitat C.G. Shastry, P. Parameswaran, M.D. Mathew, K. Bhanu Sankara Rao, and S.L. Mannan, The Effect of Strain Rate and Temperature on the Elevated Temperature Tensile Flow Behavior of Service-Exposed 2.25Cr-1Mo Steel, Mater. Sci. Eng. A., 2007, 465, p 109–115CrossRef C.G. Shastry, P. Parameswaran, M.D. Mathew, K. Bhanu Sankara Rao, and S.L. Mannan, The Effect of Strain Rate and Temperature on the Elevated Temperature Tensile Flow Behavior of Service-Exposed 2.25Cr-1Mo Steel, Mater. Sci. Eng. A., 2007, 465, p 109–115CrossRef
5.
Zurück zum Zitat C. Castan, F. Montheillet, and A. Perlade, Dynamic Recrystallization Mechanisms of an Fe-8% Al Low Density Steel Under Hot Rolling Conditions, Scr. Mater., 2013, 68, p 360–364CrossRef C. Castan, F. Montheillet, and A. Perlade, Dynamic Recrystallization Mechanisms of an Fe-8% Al Low Density Steel Under Hot Rolling Conditions, Scr. Mater., 2013, 68, p 360–364CrossRef
6.
Zurück zum Zitat F. Chen, Z.S. Cui, and S.J. Chen, Recrystallization of 30Cr2Ni4MoV Ultra-Super-Critical Rotor Steel During Hot Deformation Part I: Dynamic Recrystallization, Mater. Sci. Eng. A, 2011, 528, p 5073–5080CrossRef F. Chen, Z.S. Cui, and S.J. Chen, Recrystallization of 30Cr2Ni4MoV Ultra-Super-Critical Rotor Steel During Hot Deformation Part I: Dynamic Recrystallization, Mater. Sci. Eng. A, 2011, 528, p 5073–5080CrossRef
7.
Zurück zum Zitat F. Chen, Z.S. Cui, D.S. Sui, and B. Fu, Recrystallization of 30Cr2Ni4MoV Ultra-Super-Critical Rotor Steel During Hot Deformation. Part III: Metadynamic recrystallization, Mater. Sci. Eng. A., 2012, 540, p 46–54CrossRef F. Chen, Z.S. Cui, D.S. Sui, and B. Fu, Recrystallization of 30Cr2Ni4MoV Ultra-Super-Critical Rotor Steel During Hot Deformation. Part III: Metadynamic recrystallization, Mater. Sci. Eng. A., 2012, 540, p 46–54CrossRef
8.
Zurück zum Zitat C.W. Zheng, N.M. Xiao, D.Z. Li, and Y.Y. Li, Microstructure Prediction of the Austenite Recrystallization During Multi-pass Steel Strip Hot Rolling: A Cellular Automaton Modeling, Comput. Mater. Sci., 2008, 44, p 507–514CrossRef C.W. Zheng, N.M. Xiao, D.Z. Li, and Y.Y. Li, Microstructure Prediction of the Austenite Recrystallization During Multi-pass Steel Strip Hot Rolling: A Cellular Automaton Modeling, Comput. Mater. Sci., 2008, 44, p 507–514CrossRef
9.
Zurück zum Zitat M.P. Phaniraj, B.B. Behera, and A.K. Lahiri, Thermo-Mechanical Modeling of Two Phase Rolling and Microstructure Evolution in the Hot Strip Mill Part-II, Microstructure Evolution, J. Mater. Process. Technol., 2006, 178, p 388–394CrossRef M.P. Phaniraj, B.B. Behera, and A.K. Lahiri, Thermo-Mechanical Modeling of Two Phase Rolling and Microstructure Evolution in the Hot Strip Mill Part-II, Microstructure Evolution, J. Mater. Process. Technol., 2006, 178, p 388–394CrossRef
10.
Zurück zum Zitat M.P. Phaniraj, B.B. Behera, and A.K. Lahiri, Thermo-Mechanical Modeling of Two Phase Rolling and Microstructure Evolution in the Hot Strip Mill Part I, Prediction of Rolling Loads and Finish Rolling Temperature, J. Mater. Process. Technol., 2005, 170, p 323–335CrossRef M.P. Phaniraj, B.B. Behera, and A.K. Lahiri, Thermo-Mechanical Modeling of Two Phase Rolling and Microstructure Evolution in the Hot Strip Mill Part I, Prediction of Rolling Loads and Finish Rolling Temperature, J. Mater. Process. Technol., 2005, 170, p 323–335CrossRef
11.
Zurück zum Zitat Z.C. Sun, H. Yang, and X.Z. Ou, Effects of Process Parameters on Microstructural Evolution During Hot Ring Rolling of AISI, 5140 Steel, Comput. Mater. Sci., 2010, 49, p 134–142CrossRef Z.C. Sun, H. Yang, and X.Z. Ou, Effects of Process Parameters on Microstructural Evolution During Hot Ring Rolling of AISI, 5140 Steel, Comput. Mater. Sci., 2010, 49, p 134–142CrossRef
12.
Zurück zum Zitat R. Ding and Z.X. Guo, Coupled Quantitative Simulation of Microstructural Evolution and Plastic Flow During Dynamic Recrystallization, Acta Mater., 2001, 49, p 3163–3175CrossRef R. Ding and Z.X. Guo, Coupled Quantitative Simulation of Microstructural Evolution and Plastic Flow During Dynamic Recrystallization, Acta Mater., 2001, 49, p 3163–3175CrossRef
13.
Zurück zum Zitat U.F. Kocks and H. Mecking, Physics and Phenomenology of Strain Hardening: the FCC case, Prog. Mater Sci., 2003, 48, p 171–273CrossRef U.F. Kocks and H. Mecking, Physics and Phenomenology of Strain Hardening: the FCC case, Prog. Mater Sci., 2003, 48, p 171–273CrossRef
14.
Zurück zum Zitat H.W. Li, C. Wu, and H. Yang, Crystal Plasticity Modeling of the Dynamic Recrystallization of Two-Phase Titanium Alloys During Isothermal Processing, Int. J. Plast., 2013, 51, p 271–291CrossRef H.W. Li, C. Wu, and H. Yang, Crystal Plasticity Modeling of the Dynamic Recrystallization of Two-Phase Titanium Alloys During Isothermal Processing, Int. J. Plast., 2013, 51, p 271–291CrossRef
15.
Zurück zum Zitat N. Xiao, C. Zheng, D.Z. Li, and Y.Y. Li, A simulation of Dynamic Recrystallization by Coupling a Cellular Automaton Method with a Topology Deformation Technique, Comput. Mater. Sci., 2008, 41, p 366–374CrossRef N. Xiao, C. Zheng, D.Z. Li, and Y.Y. Li, A simulation of Dynamic Recrystallization by Coupling a Cellular Automaton Method with a Topology Deformation Technique, Comput. Mater. Sci., 2008, 41, p 366–374CrossRef
16.
Zurück zum Zitat C. Wu, H. Yang, and H.W. Li, Modeling of Static Coarsening of Two Phase Titanium Alloy in the Alpha Plus Beta Region at Different Temperature by a Cellular Automata Method, Chin. Sci. Bull., 2013, 58, p 1–10CrossRef C. Wu, H. Yang, and H.W. Li, Modeling of Static Coarsening of Two Phase Titanium Alloy in the Alpha Plus Beta Region at Different Temperature by a Cellular Automata Method, Chin. Sci. Bull., 2013, 58, p 1–10CrossRef
17.
Zurück zum Zitat Y.J. Lan, N.M. Xiao, D.Z. Li, and Y.Y. Li, Mesoscale Simulation of Deformed Austenite Decomposition into Ferrite by Coupling a Cellular Automaton Method with a Crystal Plasticity Finite Element Model, Acta. Mater., 2005, 53, p 991–1003CrossRef Y.J. Lan, N.M. Xiao, D.Z. Li, and Y.Y. Li, Mesoscale Simulation of Deformed Austenite Decomposition into Ferrite by Coupling a Cellular Automaton Method with a Crystal Plasticity Finite Element Model, Acta. Mater., 2005, 53, p 991–1003CrossRef
18.
Zurück zum Zitat C. Zhang, L.W. Zhang, Q.H. Xu, Y.N. Xia, and W.F. Shen, The Kinetics and Cellular Automaton Modeling of Dynamic Recrystallization Behavior of a Medium Carbon Cr-Ni-Mo Alloyed Steel in Hot Working Process, Mater. Sci. Eng. A, 2016, 678, p 33–43CrossRef C. Zhang, L.W. Zhang, Q.H. Xu, Y.N. Xia, and W.F. Shen, The Kinetics and Cellular Automaton Modeling of Dynamic Recrystallization Behavior of a Medium Carbon Cr-Ni-Mo Alloyed Steel in Hot Working Process, Mater. Sci. Eng. A, 2016, 678, p 33–43CrossRef
19.
Zurück zum Zitat C. Wu, H. Yang, and H.W. Li, Modeling of Discontinuous Dynamic Recrystallization of a Near-Alpha Titanium Alloy IMI834 During Isothermal Hot Compression by Combining a Cellular Automaton Model with a Crystal Plasticity Finite Element Method, Comput. Mater. Sci., 2013, 79, p 944–959CrossRef C. Wu, H. Yang, and H.W. Li, Modeling of Discontinuous Dynamic Recrystallization of a Near-Alpha Titanium Alloy IMI834 During Isothermal Hot Compression by Combining a Cellular Automaton Model with a Crystal Plasticity Finite Element Method, Comput. Mater. Sci., 2013, 79, p 944–959CrossRef
20.
Zurück zum Zitat R.D. Fu, T.S. Wang, W.H. Zhou, W.H. Zhang, and F.C. Zhang, Characterization of Precipitates in a 2.25Cr-1Mo-0.25V Steel for Large-Scale Cast-Forged Products, Mater. Charact., 2007, 58, p 968–973CrossRef R.D. Fu, T.S. Wang, W.H. Zhou, W.H. Zhang, and F.C. Zhang, Characterization of Precipitates in a 2.25Cr-1Mo-0.25V Steel for Large-Scale Cast-Forged Products, Mater. Charact., 2007, 58, p 968–973CrossRef
21.
Zurück zum Zitat G. Shen, B.J. Hu, C.W. Zheng, J.F. Gu, and D.Z. Li, Coupled Simulation of Ferrite Recrystallization in a Dual-Phase Steel Considering Deformation Heterogeneity at Mesoscale, Comput. Mater. Sci., 2018, 149, p 191–201CrossRef G. Shen, B.J. Hu, C.W. Zheng, J.F. Gu, and D.Z. Li, Coupled Simulation of Ferrite Recrystallization in a Dual-Phase Steel Considering Deformation Heterogeneity at Mesoscale, Comput. Mater. Sci., 2018, 149, p 191–201CrossRef
22.
Zurück zum Zitat F. Chen, Z.S. Cui, J. Liu, W. Chen, and S.J. Chen, Mesoscale Simulation of the High-Temperature Austenitizing and Dynamic Recrystallization by Coupling a Cellular Automaton with a Topology Deformation Technique, Mater. Sci. Eng. A, 2010, 527, p 5539–5549CrossRef F. Chen, Z.S. Cui, J. Liu, W. Chen, and S.J. Chen, Mesoscale Simulation of the High-Temperature Austenitizing and Dynamic Recrystallization by Coupling a Cellular Automaton with a Topology Deformation Technique, Mater. Sci. Eng. A, 2010, 527, p 5539–5549CrossRef
23.
Zurück zum Zitat F. Pilehva, Z. Hanzaki, A.S.M. Fatemi-Varzaneh, and A.R. Khalesian, Hot Deformation and Dynamic Recrystallization of Ti-6Al-7Nb Biomedical Alloy in Single-Phase Beta Region, J. Mater. Eng. Perform., 2015, 24, p 1790–1799CrossRef F. Pilehva, Z. Hanzaki, A.S.M. Fatemi-Varzaneh, and A.R. Khalesian, Hot Deformation and Dynamic Recrystallization of Ti-6Al-7Nb Biomedical Alloy in Single-Phase Beta Region, J. Mater. Eng. Perform., 2015, 24, p 1790–1799CrossRef
24.
Zurück zum Zitat W.D. Callister, Fundamentals of Materials Science and Engineering. Chapter 6.5, Vol 5, Wiley, London, 2012, p 130 W.D. Callister, Fundamentals of Materials Science and Engineering. Chapter 6.5, Vol 5, Wiley, London, 2012, p 130
Metadaten
Titel
Coupling a Cellular Automaton Model with a Finite Element Model for Simulating Deformation and Recrystallization of a Low-Carbon Micro-alloyed Steel During Hot Compression
verfasst von
Chuan Wu
Bing Jia
Shuang Han
Publikationsdatum
02.01.2019
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 2/2019
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-018-3834-4

Weitere Artikel der Ausgabe 2/2019

Journal of Materials Engineering and Performance 2/2019 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.