nach oben

International Journal of Mechanics and Materials in Design

Erschienen in:

24.03.2016

Crashworthiness design of horsetail-bionic thin-walled structures under axial dynamic loading

verfasst von: Youye Xiao, Hanfeng Yin, Hongbing Fang, Guilin Wen

Erschienen in: International Journal of Mechanics and Materials in Design | Ausgabe 4/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Bio-inspired engineering design has drawn increased attention in recent years for the excellent structural and mechanical properties of the biological systems. In this study, the horsetail-bionic thin-walled structures (HBTSs) were investigated for their crashworthiness under axial dynamic loading. Six HBTSs with different cross section configurations (i.e., number of cells) were evaluated using nonlinear finite element (FE) simulations. To obtain the optimal design of the HBTSs, an ensemble metamodel-based multi-objective optimization method was employed to maximize the specific energy absorption while minimizing maximum impact force of the HBTSs. Using the ensemble metamodeling, FE simulations and the NSGA-II algorithm, the Pareto optimum designs of all six HBTSs were obtained and the HBTS with 16 cells were found to have the best crashworthiness. An optimum design of the HBTS with 16 cells was verified using FE simulation and found to have good agreement with simulation results.

Vorheriger Artikel Consistent multiscale analysis of heterogeneous thin plates with smoothed quadratic Hermite triangular elements

Nächster Artikel Generalized interpolation material point method for coupled thermo-mechanical processes

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Acar, E., Rais-Rohani, M.: Ensemble of metamodels with optimized weight factors. Struct. Multidiscip. Optim. 37(3), 279–294 (2009)CrossRef

Ahmad, Z., Thambiratnam, D.P.: Crushing response of foam-filled conical tubes under quasi-static axial loading. Mater. Des. 30(7), 2393–2403 (2009)CrossRef

Ali, M., Ohioma, E., Kraft, F., Alam, K.: Theoretical, numerical, and experimental study of dynamic axial crushing of thin walled pentagon and cross-shape tubes. Thin-Walled Struct. 94, 253–272 (2015)CrossRef

Chen, W.: Experimental and numerical study on bending collapse of aluminum foam-filled hat profiles. Int. J. Solids Struct. 38(44–45), 7919–7944 (2001)CrossRefMATH

Chen, W., Wierzbicki, T.: Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption. Thin-Walled Struct. 39(4), 287–306 (2001)CrossRef

Fan, Z., Lu, G., Liu, K.: Quasi-static axial compression of thin-walled tubes with different cross-sectional shapes. Eng. Struct. 55, 80–89 (2013)CrossRef

Fang, H., Rais-Rohani, M., Liu, Z., Horstemeyer, M.F.: A comparative study of metamodeling methods for multiobjective crashworthiness optimization. Comput. Struct. 83(25–26), 2121–2136 (2005)CrossRef

Fang, J., Gao, Y., Sun, G., Zhang, Y., Li, Q.: Parametric analysis and multiobjective optimization for functionally graded foam-filled thin-wall tube under lateral impact. Comput. Mater. Sci. 90, 265–275 (2014)CrossRef

Faruque, O., Guimberteau, T., Saha, N.K.: Extruded aluminum crash can topology for maximizing specific energy absorption. Energy Absorption (2008)

Goel, T., Haftka, R., Shyy, W., Queipo, N.: Ensemble of surrogates. Struct. Multidiscip. Optim. 33(3), 199–216 (2007)CrossRef

Hanssen, A.G., Langseth, M., Hopperstad, O.S.: Static and dynamic crushing of square aluminium extrusions with aluminium foam filler. Int. J. Impact Eng 24(4), 347–383 (2000)CrossRefMATH

Hou, S., Li, Q., Long, S., Yang, X., Li, W.: Crashworthiness design for foam filled thin-wall structures. Mater. Des. 30(6), 2024–2032 (2009)CrossRef

Jiao, H., Zhang, Y., Chen, W.: The lightweight design of low RCS pylon based on structural bionics. J. Bionic Eng. 7(2), 182–190 (2010)CrossRef

Kavi, H., Toksoy, A.K., Guden, M.: Predicting energy absorption in a foam-filled thin-walled aluminum tube based on experimentally determined strengthening coefficient. Mater. Des. 27(4), 263–269 (2006)CrossRef

Kim, H.-S.: New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency. Thin-Walled Struct. 40(4), 311–327 (2002)CrossRef

Liao, X., Li, Q., Yang, X., Zhang, W., Li, W.: Multiobjective optimization for crash safety design of vehicles using stepwise regression model. Struct. Multidiscip. Optim. 35(6), 561–569 (2007)CrossRef

Liu, Y.: Crashworthiness design of multi-corner thin-walled columns. Thin-Walled Struct. 46(12), 1329–1337 (2008a)CrossRef

Liu, Y.: Optimum design of straight thin-walled box section beams for crashworthiness analysis. Finite Elem. Anal. Des. 44(3), 139–147 (2008b)CrossRef

Liu, Y.: Collapse behaviour and simplified modeling of triangular cross-section columns. Indian J. Eng. Mater. Sci. 16, 71–78 (2009)

Liu, Y., Dag, M.L.: Concept modeling of tapered thin-walled tubes. J Zhejiang Univ Sci A 10(1), 44–53 (2009)CrossRef

Liu, Y., Day, M.L.: Bending collapse of thin-walled circular tubes and computational application. Thin-Walled Struct. 46(4), 442–450 (2008)CrossRef

Liu, S., Tong, Z., Tang, Z., Liu, Y., Zhang, Z.: Bionic design modification of non-convex multi-corner thin-walled columns for improving energy absorption through adding bulkheads. Thin-Walled Struct. 88, 70–81 (2015)CrossRef

Lophaven, S.N., Nielsen, H.B., Søndergaard, J.: DACE—a MatLab Kriging toolbox. Technical Report IMM-TR-2002-12, Technical University of Denmark (2002)

LS-DYNA keyword user’s manual: nonlinear dynamic analysis of structures. Version 971, vols. 1–2. California, Livermore Software Technology Corporation, May 2007

Meguid, S.A., Attia, M.S., Monfort, A.: On the crush behaviour of ultralight foam-filled structures. Mater. Des. 25(3), 183–189 (2004)CrossRef

Mirfendereski, L., Salimi, M., Ziaei-Rad, S.: Parametric study and numerical analysis of empty and foam-filled thin-walled tubes under static and dynamic loadings. Int. J. Mech. Sci. 50(6), 1042–1057 (2008)CrossRef

Murugan, P., Kannan, S., Baskar, S.: NSGA-II algorithm for multi-objective generation expansion planning problem. Electr. Power Syst. Res. 79(4), 622–628 (2009)CrossRef

Najafi, A., Rais-Rohani, M.: Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes. Thin-Walled Struct. 49(1), 1–12 (2011)CrossRef

Santosa, S., Wierzbicki, T.: Effect of an ultralight metal filler on the bending collapse behavior of thin-walled prismatic columns. Int. J. Mech. Sci. 41(8), 995–1019 (1999)CrossRefMATH

Seitzberger, M., Rammerstorfer, F.G., Degischer, H.P., Gradinger, R.: Crushing of axially compressed steel tubes filled with aluminium foam. Acta Mech. 125(1–4), 93–105 (1997)CrossRefMATH

Seitzberger, M., Rammerstorfer, F.G., Gradinger, R., Degischer, H.P., Blaimschein, M., Walch, C.: Experimental studies on the quasi-static axial crushing of steel columns filled with aluminium foam. Int. J. Solids Struct. 37(30), 4125–4147 (2000)CrossRef

Song, H.-W., Fan, Z.-J., Yu, G., Wang, Q.-C., Tobota, A.: Partition energy absorption of axially crushed aluminum foam-filled hat sections. Int. J. Solids Struct. 42(9–10), 2575–2600 (2005)CrossRef

Sun, G., Xu, F., Li, G., Li, Q.: Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness. Int. J. Impact Eng 64, 62–74 (2014)CrossRef

Tai, Y.S., Huang, M.Y., Hu, H.T.: Axial compression and energy absorption characteristics of high-strength thin-walled cylinders under impact load. Theoret. Appl. Fract. Mech. 53(1), 1–8 (2010)CrossRef

Tang, Z., Liu, S., Zhang, Z.: Analysis of energy absorption characteristics of cylindrical multi-cell columns. Thin-Walled Struct. 62, 75–84 (2013)CrossRef

Wang, G.G., Shan, S.: Review of metamodeling techniques in support of engineering design optimization. J. Mech. Des. 129(4), 370–380 (2006)CrossRef

Yin, H., Wen, G., Wu, X., Qing, Q., Hou, S.: Crashworthiness design of functionally graded foam-filled multi-cell thin-walled structures. Thin-Walled Struct. 85, 142–155 (2014a)CrossRef

Yin, H., Wen, G., Fang, H., Qing, Q., Kong, X., Xiao, J., et al.: Multiobjective crashworthiness optimization design of functionally graded foam-filled tapered tube based on dynamic ensemble metamodel. Mater. Des. 55, 747–757 (2014b)CrossRef

Zhang, X., Zhang, H.: Energy absorption of multi-cell stub columns under axial compression. Thin-Walled Struct. 68, 156–163 (2013)CrossRef

Zhang, X., Zhang, H.: Axial crushing of circular multi-cell columns. Int. J. Impact Eng 65, 110–125 (2014)CrossRef

Zhang, X., Cheng, G., Zhang, H.: Theoretical prediction and numerical simulation of multi-cell square thin-walled structures. Thin-Walled Struct. 44(11), 1185–1191 (2006)CrossRef

Zhao, L., Ma, J., Wang, T., Xing, D.: Lightweight design of mechanical structures based on structural bionic methodology. J Bion Eng 7, S224–S231 (2010)CrossRef

Zhao, L., Ma, J., Chen, W., Guo, H.: Lightweight design and verification of gantry machining center crossbeam based on structural bionics. J Bion Eng 8(2), 201–206 (2011)CrossRef

Titel: Crashworthiness design of horsetail-bionic thin-walled structures under axial dynamic loading
verfasst von: Youye Xiao
Hanfeng Yin
Hongbing Fang
Guilin Wen
Publikationsdatum: 24.03.2016
Verlag: Springer Netherlands
Erschienen in: International Journal of Mechanics and Materials in Design / Ausgabe 4/2016
Print ISSN: 1569-1713
Elektronische ISSN: 1573-8841
DOI: https://doi.org/10.1007/s10999-016-9341-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2016

A dynamic XFEM formulation for crack identification

A new design of magnetorheological fluid based braking system using genetic algorithm optimization

Accurate and consistent FE modelling of soft docking of micro/nano paired-satellites using variational inequalities

Consistent multiscale analysis of heterogeneous thin plates with smoothed quadratic Hermite triangular elements

Generalized interpolation material point method for coupled thermo-mechanical processes

A coupled SPH-DEM approach to model the interactions between multiple red blood cells in motion in capillaries

Premium Partner

Marktübersichten