nach oben

European Journal of Wood and Wood Products

Erschienen in:

30.10.2018 | Original

Cu thin films on wood surface for robust superhydrophobicity by magnetron sputtering treatment with perfluorocarboxylic acid

verfasst von: Wenhui Bao, Ming Zhang, Zhen Jia, Yue Jiao, Liping Cai, Daxin Liang, Jian Li

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 1/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Superhydrophobic wood was fabricated using a magnetron sputtering method, which can be applied to substrates with different shapes for its facile and controllable advantages. Copper was deposited on the cross-section surface of pristine wood followed by a treatment of perfluorocarboxylic acid. The results revealed that the deposition thickness played an important role in varying the surface morphology. In the optimized condition, water contract angle (CA) and sliding angle can reach 154° and 3.5°, respectively, when the deposition thickness was 50 nm. More importantly, the superhydrophobic surface can resist up to 100 times impingement of sand abrasion, and CA retained to be 151°. This method will have promising applications in wooden artifacts, such as clock frame, art, carvings and decorations.

Vorheriger Artikel Influence of high voltage electrostatic field (HVEF) on bonding characteristics of Masson (Pinus massoniana Lamb.) veneer composites

Nächster Artikel Surface properties of different natural precious decorative veneers by plasma modification

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

And BQ, Shen Z (2005) Fabrication of superhydrophobic surfaces by dislocation-selective chemical etching on aluminum, copper, and zinc substrates. Langmuir J Surf Colloids 21:9007–9009CrossRef

Bang KH, Hwang DK, Jeong MC, Sohn KS, Myoung JM (2003) Comparative studies on structural and optical properties of ZnO films grown on c-plane sapphire and GaAs (001) by MOCVD. Solid State Commun 126:623–627CrossRef

Cassie ABD (1944) Wettability of porous surfaces. Trans Faraday Soc 40:546–551CrossRef

Deng X, Mammen L, Butt HJ, Vollmer D (2012) Candle soot as a template for a transparent robust superamphiphobic coating. Science 335:67–70. https://doi.org/10.1126/science.1207115 CrossRefPubMed

Feng L et al (2002) Super-hydrophobic surfaces: from natural to artificial. Adv Mater 14:1857–1860. https://doi.org/10.1002/adma.200290020 CrossRef

Gao L, Lu Y, Cao J, Li J, Sun Q (2015a) Reversible photocontrol of wood-surface wettability between superhydrophilicity and superhydrophobicity based on a TiO₂ film. J Wood Chem Technol 35:365–373. https://doi.org/10.1080/02773813.2014.984078 CrossRef

Gao L, Xiao S, Gan W, Zhan X, Li J (2015b) Durable superamphiphobic wood surfaces from Cu₂O film modified with fluorinated alkyl silane. RSC Adv 5:98203–98208. https://doi.org/10.1039/c5ra19433d CrossRef

Gao L, Lu Y, Li J, Sun Q (2016) Superhydrophobic conductive wood with oil repellency obtained by coating with silver nanoparticles modified by fluoroalkyl silane. Holzforschung 70:63–68CrossRef

Hill CAS (2006) Wood modification: chemical, thermal and other processes. Wiley, New York. https://doi.org/10.1002/0470021748 CrossRef

Inoue M, Hashizume K, Tsuchikawa H (1988) The properties of aluminum thin films sputter deposited at elevated temperatures. J Vac Sci Technol A Vac Surf Films 6:1636–1639CrossRef

Jin C, Yao Q, Li J, Fan B, Sun Q (2015) Fabrication, superhydrophobicity, and microwave absorbing properties of the magnetic γ-Fe₂O₃/bamboo composites. Mater Des 85:205–210. https://doi.org/10.1016/j.matdes.2015.07.016 CrossRef

Kang W, Lee NH (2002) Mathematical modeling to predict drying deformation and stress due to the differential shrinkage within a tree disk Wood. Sci Technol 36:463–476. https://doi.org/10.1007/s00226-002-0153-5 CrossRef

Kang W, Lee NH (2004) Relationship between radial variations in shrinkage and drying defects of tree disks. J Wood Sci 50:209–216. https://doi.org/10.1007/s10086-003-0559-1 CrossRef

Kelly PJ, Arnell RD (2000) Magnetron sputtering: a review of recent developments. Vacuum 56:159–172. https://doi.org/10.1016/S0042-207X(99)00189-X CrossRef

Khedir KR, Kannarpady GK, Ishihara H, Woo J, Ryerson C, Biris AS (2010) Morphology control of tungsten nanorods grown by glancing angle RF magnetron sputtering under variable argon pressure and flow rate. Phys Lett A 374:4430–4437. https://doi.org/10.1016/j.physleta.2010.08.066 CrossRef

Kozono Y, Komuro M, Narishige S, Hanazono M, Sugita Y (1987) Structures and magnetic properties of Fe/Cu multilayered films fabricated by a magnetron sputtering method. J Appl Phys 61:4311. https://doi.org/10.1063/1.338457 CrossRef

Lafuma A, Quéré D (2003) Superhydrophobic states. Nat Mater 2:457–460CrossRefPubMed

Li J, Yu H, Sun Q, Liu Y, Cui Y, Lu Y (2010) Growth of TiO₂ coating on wood surface using controlled hydrothermal method at low temperatures. Appl Surf Sci 256:5046–5050. https://doi.org/10.1016/j.apsusc.2010.03.053 CrossRef

Li X, Liu C, Shi T, Lei Y, Zhang Q, Zhou C, Huang X (2017) Preparation of multifunctional Al alloys substrates based on micro/nanostructures and surface modification. Mater Des 122:21–30. https://doi.org/10.1016/j.matdes.2017.02.092 CrossRef

Lin Y, Shen Y, Liu A, Zhu Y, Liu S, Jiang H (2016) Bio-inspiredly fabricating the hierarchical 3D porous structure superhydrophobic surfaces for corrosion prevention. Mater Des 103:300–307. https://doi.org/10.1016/j.matdes.2016.04.083 CrossRef

Liu K, Jiang L (2011) Metallic surfaces with special wettability. Nanoscale 3:825–838. https://doi.org/10.1039/c0nr00642d CrossRefPubMed

Mukherjee SK, Joshi L, Barhai PK (2011) A comparative study of nanocrystalline Cu film deposited using anodic vacuum arc and dc magnetron sputtering. Surf Coat Technol 205:4582–4595. https://doi.org/10.1016/j.surfcoat.2011.03.119 CrossRef

Nosonovsky M (2007) On the range of applicability of the Wenzel and Cassie equations. Langmuir J Surf Colloids 23:9919–9920CrossRef

Pang SC, Anderson MA (2000) Novel electrode materials for thin-film ultracapacitors: comparison of electrochemical properties of sol-gel-derived and electrodeposited manganese dioxide. J Electrochem Soc 147:444–450CrossRef

Reina A et al (2009) Large area, few-layer graphene films on arbitrary substrates by chemical vapor deposition. Nano Lett 9:655–663CrossRef

Sun Q, Lu Y, Liu Y (2011) Growth of hydrophobic TiO₂ on wood surface using a hydrothermal method. J Mater Sci 46:7706–7712. https://doi.org/10.1007/s10853-011-5750-y CrossRef

Sun Q et al (2012) Hydrothermal fabrication of rutile TiO₂ submicrospheres on wood surface: an efficient method to prepare UV-protective wood. Mater Chem Phys 133:253–258. https://doi.org/10.1016/j.matchemphys.2012.01.018 CrossRef

Wang Q, Zhang B, Qu M, Zhang J, He D (2008) Fabrication of superhydrophobic surfaces on engineering material surfaces with stearic acid. Appl Surf Sci 254:2009–2012. https://doi.org/10.1016/j.apsusc.2007.08.039 CrossRef

Wang C, Piao C, Lucas C (2011) Synthesis and characterization of superhydrophobic wood surfaces. J Appl Polym Sci 119:1667–1672. https://doi.org/10.1002/app.32844 CrossRef

Wang S, Wang C, Liu C, Zhang M, Ma H, Li J (2012) Fabrication of superhydrophobic spherical-like α-FeOOH films on the wood surface by a hydrothermal method. Colloids Surf A 403:29–34. https://doi.org/10.1016/j.colsurfa.2012.03.051 CrossRef

Xi J, Feng L, Jiang L (2008) A general approach for fabrication of superhydrophobic and superamphiphobic surfaces. Appl Phys Lett 92:053102. https://doi.org/10.1063/1.2839403 CrossRef

Xie Y, Krause A, Militz H, Mai C (2006) Coating performance of finishes on wood modified with an N-methylol compound. Prog Org Coat 57:291–300. https://doi.org/10.1016/j.porgcoat.2006.06.010 CrossRef

Xie Y, Krause A, Militz H, Mai C (2008) Weathering of uncoated and coated wood treated with methylated 1,3-dimethylol-4,5-dihydroxyethyleneurea (mDMDHEU). Holz Roh-Werkst 66:455–464. https://doi.org/10.1007/s00107-008-0270-4 CrossRef

Yao Q, Wang C, Fan B, Wang H, Sun Q, Jin C, Zhang H (2016) One-step solvothermal deposition of ZnO nanorod arrays on a wood surface for robust superamphiphobic performance and superior ultraviolet resistance. Sci Rep 6:35505. https://doi.org/10.1038/srep35505 CrossRefPubMedPubMedCentral

Yu B, Woo P, Erb U (2007) Corrosion behaviour of nanocrystalline copper foil in sodium hydroxide solution. Scripta Mater 56:353–356CrossRef

Yuan Z et al (2013) A novel fabrication of a superhydrophobic surface with highly similar hierarchical structure of the lotus leaf on a copper sheet. Appl Surf Sci 285:205–210. https://doi.org/10.1016/j.apsusc.2013.08.037 CrossRef

Zheng JY, Bao SH, Guo Y, Jin P (2014) Natural hydrophobicity and reversible wettability conversion of flat anatase TiO₂ thin film ACS. Appl Mater Interfaces 6:1351–1355. https://doi.org/10.1021/am404470e CrossRef

Zheng J, Bao S, Jin P (2015) TiO₂ (R)/VO₂ (M)/TiO₂ (A) multilayer film as smart window: combination of energy-saving, antifogging and self-cleaning functions. Nano Energy 11:136–145. https://doi.org/10.1016/j.nanoen.2014.09.023 CrossRef

Zheng J, Lv Y, Xu S, Han X, Zhang S, Hao J, Liu W (2017) Nanostructured TiN-based thin films by a novel and facile synthetic route. Mater Des 113:142–148. https://doi.org/10.1016/j.matdes.2016.10.008 CrossRef

Zhu H et al (2016) Wood-derived materials for green electronics, biological devices, and energy applications. Chem Rev 116:9305–9374. https://doi.org/10.1021/acs.chemrev.6b00225 CrossRefPubMed

Titel: Cu thin films on wood surface for robust superhydrophobicity by magnetron sputtering treatment with perfluorocarboxylic acid
verfasst von: Wenhui Bao
Ming Zhang
Zhen Jia
Yue Jiao
Liping Cai
Daxin Liang
Jian Li
Publikationsdatum: 30.10.2018
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 1/2019
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-018-1366-0

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2019

Biocidal potential of the extractives of four Malaysian timbers against subterranean termites and wood decay fungi

Production of fiberboard from rice straw thermomechanical extrudates by thermopressing: influence of fiber morphology, water and lignin content

Influence of high voltage electrostatic field (HVEF) on bonding characteristics of Masson (Pinus massoniana Lamb.) veneer composites

Editorial

Surface properties of different natural precious decorative veneers by plasma modification

Water up-take in fuel pellets studied by Dynamic Vapour Sorption (DVS) analysis and its potential role in self-heating during storage