Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 7/2011

01.10.2011

Cyclic Oxidation Behavior of Simulated Post-Weld Heat-Treated P91

verfasst von: S. Rajendran Pillai, R. K. Dayal

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 7/2011

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

For long-term service life it is desirable that the high-temperature components posses slow-growing oxide scale. The growth and degradation of the oxide scale on P91 were studied by a thermal cycling method. The oxidation temperature was 780 °C and the duration of each cycle was 2 h. The mass gain and integrity of the scale was examined using a thermogravimetric balance. Any lack of integrity is monitored by the transient mass gain associated with the exposure of fresh surface. The scale retained the integrity throughout 100 cycles. Post-oxidation examination was carried out by scanning electron microscopy, energy dispersive spectroscopy and laser Raman spectroscopy. The nature of the scale was characterized and the reason for the compositional segregation is analyzed.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat S. Rajendran Pillai and R.K. Dayal, Cyclic Oxidation of P91 by Thermogravimetry and Investigation of the Integrity of the Scale by Transient Mass Gain Method, Oxid. Met., 2008, 69(3–4), p 131–142CrossRef S. Rajendran Pillai and R.K. Dayal, Cyclic Oxidation of P91 by Thermogravimetry and Investigation of the Integrity of the Scale by Transient Mass Gain Method, Oxid. Met., 2008, 69(3–4), p 131–142CrossRef
2.
Zurück zum Zitat S. Rajendran Pillai, P. Shankar, and H.S. Khatak, Cyclic Oxidation of P91 at 1073, 1123 and 1173 K, High Temp. Mater. Process., 2004, 23(3), p 196–204 S. Rajendran Pillai, P. Shankar, and H.S. Khatak, Cyclic Oxidation of P91 at 1073, 1123 and 1173 K, High Temp. Mater. Process., 2004, 23(3), p 196–204
3.
Zurück zum Zitat M. Schuetze, Deformation and Cracking Behaviour of Protective Oxide Scale on Heat-Resistant Steels Under Tensile Strain, Oxid. Met., 1985, 24(3/4), p 199–232CrossRef M. Schuetze, Deformation and Cracking Behaviour of Protective Oxide Scale on Heat-Resistant Steels Under Tensile Strain, Oxid. Met., 1985, 24(3/4), p 199–232CrossRef
4.
Zurück zum Zitat S. Rajendran Pillai, Life History of Oxide Scales in Metals and Alloys, Corros. Rev., 2005, 23(4–6), p 277–328CrossRef S. Rajendran Pillai, Life History of Oxide Scales in Metals and Alloys, Corros. Rev., 2005, 23(4–6), p 277–328CrossRef
5.
Zurück zum Zitat W.J. Quadakkers and K. Bongartz, The Prediction of Breakaway Oxidation for Alumina Forming ODS Alloys Using Oxidation Diagram, Werkst. Korros., 1994, 45, p 232–241CrossRef W.J. Quadakkers and K. Bongartz, The Prediction of Breakaway Oxidation for Alumina Forming ODS Alloys Using Oxidation Diagram, Werkst. Korros., 1994, 45, p 232–241CrossRef
6.
Zurück zum Zitat M. Schuetze, Plasticity of Protective Oxide Scale, Mater. Sci. Technol., 1990, 6, p 32–38 M. Schuetze, Plasticity of Protective Oxide Scale, Mater. Sci. Technol., 1990, 6, p 32–38
7.
Zurück zum Zitat R. Hales, The High Temperature Oxidation Behaviour of Austenitic Stainless Steel, Werkst. Korros., 1978, 29, p 393–399CrossRef R. Hales, The High Temperature Oxidation Behaviour of Austenitic Stainless Steel, Werkst. Korros., 1978, 29, p 393–399CrossRef
8.
Zurück zum Zitat D. Monceau and D. Poquillon, Continuous Thermogravimetry Under Cyclic Conditions, Oxid. Met., 2004, 61(1/2), p 143–153CrossRef D. Monceau and D. Poquillon, Continuous Thermogravimetry Under Cyclic Conditions, Oxid. Met., 2004, 61(1/2), p 143–153CrossRef
9.
Zurück zum Zitat R. Peraldi and B. Pint, Effect of Cr and Ni Contents on the Oxidation Behaviour of Ferritic and Austenitic Model Alloys in Air with Water Vapour, Oxid. Met., 2004, 61, p 463–483CrossRef R. Peraldi and B. Pint, Effect of Cr and Ni Contents on the Oxidation Behaviour of Ferritic and Austenitic Model Alloys in Air with Water Vapour, Oxid. Met., 2004, 61, p 463–483CrossRef
10.
Zurück zum Zitat S. Jianian, Z. Longjiang, and L. Tiefan, High Temperature Oxidation of Fe-Cr Alloy in Wet Oxygen, Oxid. Met., 1997, 48(3/4), p 347–356CrossRef S. Jianian, Z. Longjiang, and L. Tiefan, High Temperature Oxidation of Fe-Cr Alloy in Wet Oxygen, Oxid. Met., 1997, 48(3/4), p 347–356CrossRef
11.
Zurück zum Zitat D. Jeremy Ramsaey, L. Richard, and L. McCreery, Raman Microscopy of Chromate Interactions with Corroding Aluminum Alloy 2024–T3, Corros. Sci., 2004, 46, p 1729–1739CrossRef D. Jeremy Ramsaey, L. Richard, and L. McCreery, Raman Microscopy of Chromate Interactions with Corroding Aluminum Alloy 2024–T3, Corros. Sci., 2004, 46, p 1729–1739CrossRef
12.
Zurück zum Zitat D.S. Dunn, M.B. Bogart, C.S. Brossiand, and G.A. Cragnolino, Corrosion of Iron Under Alternate Wet and Dry Conditions, Corrosion, 2000, 56, p 470–488CrossRef D.S. Dunn, M.B. Bogart, C.S. Brossiand, and G.A. Cragnolino, Corrosion of Iron Under Alternate Wet and Dry Conditions, Corrosion, 2000, 56, p 470–488CrossRef
13.
Zurück zum Zitat X.J. Wang, H.D. Li, Y.J. Fei, X. Wang, Y.Y. Xiong, Y.X. Nie, and K.A. Feng, XRD and Raman Studies of Vanadium Oxide Thin Films Deposited on Fused Silica Substrate by RF Magnetron Sputtering, Appl. Surf. Sci., 2001, 177, p 8–14CrossRef X.J. Wang, H.D. Li, Y.J. Fei, X. Wang, Y.Y. Xiong, Y.X. Nie, and K.A. Feng, XRD and Raman Studies of Vanadium Oxide Thin Films Deposited on Fused Silica Substrate by RF Magnetron Sputtering, Appl. Surf. Sci., 2001, 177, p 8–14CrossRef
14.
Zurück zum Zitat T. Onfroy, O.V. Manoilova, S.B. Nukallah, D.M. Hercules, G. Clet, and M. Haoullah, Surface Structure and Catalytic Performance of Niobium Oxide Supported on Titania, Appl. Catal. A, 2007, 316, p 184–190CrossRef T. Onfroy, O.V. Manoilova, S.B. Nukallah, D.M. Hercules, G. Clet, and M. Haoullah, Surface Structure and Catalytic Performance of Niobium Oxide Supported on Titania, Appl. Catal. A, 2007, 316, p 184–190CrossRef
Metadaten
Titel
Cyclic Oxidation Behavior of Simulated Post-Weld Heat-Treated P91
verfasst von
S. Rajendran Pillai
R. K. Dayal
Publikationsdatum
01.10.2011
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 7/2011
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-010-9747-5

Weitere Artikel der Ausgabe 7/2011

Journal of Materials Engineering and Performance 7/2011 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.