Anzeige
Erschienen in:
2020 | OriginalPaper | Buchkapitel
Design and Fabrication of DLP 3D Printer
verfasst von : Jaydev Gohil, Rajveersinh Gohil, Romil Gundaraniya, Mihir Prajapati, Savan Fefar
Erschienen in: Innovative Product Design and Intelligent Manufacturing Systems
Verlag: Springer Singapore
Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
Abstract
Digital light processing (DLP) 3D printing is an additive manufacturing (AM) process which is used to produce parts via photopolymerization process in which resin is cured by UV light. Vat photopolymerization is a form of AM. It has a liquid bath of a polymeric resin which is cured layer by layer through precise control with help of stepper motor and projection of a light source of DLP projector. Printing time, layer thickness, and lumens of the projector play an important role in the printing process. A series of specimens was designed, printed, and tested. Total printing time, layer thickness, and layer exposure time were analyzed. We used 365 nm wavelength photopolymer resin, BENQ MP515 projector having 2500 ANSI lumens. This paper shows the design and fabrication of DLP 3D printer with low cost and good accuracy.