nach oben

Microsystem Technologies

Erschienen in:

19.01.2024 | Technical Paper

Design of capacitive pressure sensor for continuous glucose monitoring system

verfasst von: G. Sai Lakshmi, K. Srinivasa Rao

Erschienen in: Microsystem Technologies | Ausgabe 12/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Capacitive sensor is best suitable sensor for the fabrication. In this study, we used Finite Element Method (FEM) tool to design and simulate capacitive pressure sensor based on the nob-linearity and sensitivity aspects. The sensor consists of parallel plates which is electrodes made up by optimizing two sensing devices that is microbridge and micro-cantilever with three different materials aluminium, gold and platinum. Among those aluminium is better due to its non-linearity and cost. The suitable sensing element is integrated into pressure sensor in order to measure the variation in glucose concentration levels.

Vorheriger Artikel Numerical study of a novel electroosmotic active micromixer with twin diamond-shaped chambers and sawteeth

Nächster Artikel Dynamic high-gain observer approach with sliding mode control for an arc-shaped shape memory alloy compliant actuator

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Bakhoum EG, Cheng MHM (2010) Novel capacitive pressure sensor. J Microelectromechan Syst 19(3):443CrossRef

Balavalad K, Sheeparamatti BG (2015) A critical review of mems capacitive pressure sensors. Sensors Transducers. https://doi.org/10.17577/IJERTV4IS030671CrossRef

Chen C, Zhao XL, Li ZH, Zhu ZG, Qian SH, Flewitt AJ (2017) Current and emerging technology for continuous glucose monitoring. Sensors 17:182CrossRef

Chou J-C (2015) Fabrication and characteristic analysis of a remote real-time monitoring applied to glucose sensor system based on microfluidic framework”. IEEE Sens J 15:3234–3240CrossRef

Muhammad Faris, Tayyab Ahmad Ansari, Tariq Javid, Abdul Haseeb, Muhammad Danish Mujib. (2017). Towards Design and Development of Noninvasive Glucose Monitoring System. IEEE

Feng J, Chen L, Li X, Zhang J (2021) Highly Sensitive Piezoresistive Sensors Based on a Voltage Divider Circuit With TFTs for Ultra-Low Pressure Detection. J Electron Devices Soc

Fenlan X, Li X, Shi Y, Li L, Wang W, He L, Liu R (2018) Recent developments for flexible pressure sensors: a review. Micromachines 9:580CrossRef

Ficek R, Elias M, Zajickova L, Jasek On, Vrba R (2007) Gas pressure sensor based on PECVD grown carbon nanotubes. Mater Res Soc. https://doi.org/10.1557/PROC-1018-EE14-05CrossRef

Girija Sravani K, Sai Lakshmi G, Srinivasa Rao K (2019) Design and optimization of piezoresistive materials based microbridge for electro-osmosis pressure sensor. Trans Electrical Electron Mater 20:198CrossRef

Guha K, Sateesh J, Dutta A, Sengupta P, Srinivasa Rao K, Agarwal A (2019) Mimicking kidney re-absorption using microfluidics by considering hydrostatic pressure inside kidney tubules: structural and analytical study. Microsyst Technol 6:1769

Wan Hafiy Wan Morshidi, Zarimin Zaharudin, Sheroz Khan. 2018. Anis Nurashikin Nordin, Faraz Ahmed Shaikh, Ismail Adam, Kushsairy Abdul Kader, “Inter-Digital Sensor For Non-Invasive Blood Glucose Monitoring. International Conference on Innovative Research and Development (ICIRD), IEEE

Huang X, LeDuc C, Ravussin Y, Li S, Song B, Wang Q, Accili D, Leibel R, Lin Q (2019) A mems differential dielectric sensor for continuous glucose monitoring. IEEE 29:910

S.Jeyapriya and R.Ramalakshmi, (2017) Glucose Monitoring and Control in Diabetes Using GSM and Automatic Insulin Injector System for Human Bodies. International Conference On Intelligent Techniques In Control, Optimization And Signal Processing, IEEE

Li C, Cordovilla F (2010) Design and optimization of a novel structural MEMS piezoresistive pressure sensor. Microsyst Technol 23:4531CrossRef

Li D, Li T, Zhang D (2011) A monolithic piezoresistive pressure-flow sensor with integrated signal-conditioning circuit. IEEE Sensors J. https://doi.org/10.1109/JSEN.2010.2096536CrossRef

Li C, Francisco Cordovilla R, Jagdheesh JL (2016) Design and optimization of a novel structural MEMS piezoresistive pressure sensor”. Microsyst Technol 23:4531CrossRef

Mahruz TA, Matin R, Wahid FB, Dev T (2016) Material and performance analysis of MEMS piezoresistive pressure sensor. Int J Eng Trends Technol. https://doi.org/10.14445/22315381/IJETT-V31P202CrossRef

Markevicius V, Cepenas M, Andriukaitis D, Navikas D (2013) Blood glucose level estimation using interdigital electrodes. Elektronika Ir Elektrotechnika 19(6):71

Melvås P, Stemme G (2023) A diode-based two-wire solution for temperature-compensated piezoresistive pressure sensors. IEEE Trans Electron Devices. https://doi.org/10.1109/TED.2003.809026CrossRef

M. Norouznejad Jelodar, B. A. Ganji. 2016. Design of high sensitivity and linearity microelectromechanical systems capacitive tire pressure sensor using stepped membrane. International Journal of Engineering, March.

Prasant Kumar Pattnaik and Narayan Krishnaswamy. 2015 Application of MEMS based capacitive sensor for continuous monitoring of glucose. IEEE Sensors Journal. https://doi.org/10.1109/JSEN.2019.2962251

Pickup JC, Hussain F, Evans ND, Rolinski OJ, Birch DJ (2005) Fluorescence-based glucose sensors. Biosensors Bioelectron. https://doi.org/10.1016/j.bios.2004.10.002CrossRef

Rao KS, Sateesh J, Guha K, Baishnab KL, Ashok P, Sravani KG (2020) Design and analysis of MEMS based piezoelectric micro pump integrated with micro needle. Microsyst Technol 26:3153CrossRef

Rao KS, Chandrasekharam K, Sai Sri SB, Suma S, Hamza M, Sravani KG (2020) Design and performance analysis of PDMS based micropump. Trans Electr Electron Mater 21:497CrossRef

Rao KS, Samyuktha W, Vardhan DV, Naidu BG, Kumar PA, Sravani KG, Guha K (2020) Design and sensitivity analysis of capacitive MEMS pressure sensor for blood pressure measurement. Microsyst Technol 26(6):2371CrossRef

Rao KS, Vineetha KV, Sailaja BVS, Guha K, Maity NP, Maity R, Sravani KG (2021) Design, simulation and performance analysis bio-sensors for the detection of cholera and diarrhea using MEMS technology. Microsyst Technol 27:419CrossRef

Sateesh J, Girija Sravani K, Akshay Kumar R, Koushik Guha K, Rao S (2017) Design and flow analysis of MEMS based piezo-electric micro pump. Microsyst Technol. https://doi.org/10.1007/s00542-017-3563-xCrossRef

Sateesh J, Guha K, Dutta A, Pratim Sengupta K, Rao S (2019) Regenerating re-absorption function of proximal convoluted tubule using microfluidics for kidney onchip applications. SN Appl Sci. https://doi.org/10.1007/s42452-019-1840-2CrossRef

Sravani KG, Ramakrishna D (2022) Design of Micropump with two stacked ring type piezoelectric actuators for drug delivery. J Micro-Bio Robot 17:69CrossRef

Srinivasa R (2020) Design, simulation and analysis of micro electromechanical system microneedle for micropump in drug delivery systems. IET Nanobiotechnol. https://doi.org/10.1049/nbt2.12013CrossRef

Srinivasa Rao K, Sai Lakshmi G (2019) Analysis of PDMS based MEMS device for drug delivery systems. Microsyst Technol 27:659CrossRef

Srinivasa Rao K, Hamza Md, Ashok Kumar P, Girija Sravani K (2019) Design and optimization of MEMS based piezoelectric actuator for drug delivery systems. Microsyst Technol. https://doi.org/10.1007/s00542-019-04712-9CrossRef

Srinivasa Rao K, Mohitha Reddy B, Bala Teja V, Krishnateja GVS, Ashok Kumar P, Ramesh KS (2020) Design and simulation of MEMS based capacitive pressure sensor for harsh environment. Microsyst Technol 26:1875–1880CrossRef

Srinivasa Rao K, Samyuktha W et al (2020) Design and sensitivity analysis of capacitive MEMS pressure sensor for blood pressure measurement. Microsyst Technol 26(8):2371CrossRef

Suraj S (2010) Nanocrystalline piezoresistive polysilicon film by aluminum-induced crystallization for pressure-sensing applications. IEEE Trans Nanotechnol. https://doi.org/10.1109/TNANO.2010.2054104CrossRef

Tanaka Y, Tajima T (2020) Differential continuous wave photo acoustic spectroscopy for non-invasive glucose monitoring. IEEE Sensors J. https://doi.org/10.1109/JSEN.2019.2962251CrossRef

Tanaka Y, Tajima T, Seyama M, Waki K (2019) Differential continuous wave photoacoustic spectroscopy for non-invasive glucose monitoring. IEEE Sensors J 25(5):4453

Tran AV, Zhang X, Zhu B (2017) The development of a new piezoresistive pressure sensor for low pressures. IEEE Trans Indust Electron 65(8):6487CrossRef

Vineetha KV, Girija Sravani K, Sailaja BVS, Ashok Kumar P, Guha K, Kr S, Kotamraju VSV, Prabhakar KS (2018) Performance analysis of MEMS sensor for the detection of cholera and diarrhea. Microsyst Technol. https://doi.org/10.1007/s00542-018-3810-9CrossRef

Vineetha KV, Ashok Kumar P et al (2018) Design of MEMS sensor for the detection of cholera and diarrehea by capacitance modulation. Microsyst Technol. https://doi.org/10.1007/s00542-017-3702-4CrossRef

Zhao Y, Li S, Davidson A, Yang B, Wang Q, Lin Q (2007) A MEMS viscometric sensor for continuous glucose monitoring. J Micromechan Microeng. https://doi.org/10.1088/0960-1317/17/12/020CrossRef

Titel: Design of capacitive pressure sensor for continuous glucose monitoring system
verfasst von: G. Sai Lakshmi
K. Srinivasa Rao
Publikationsdatum: 19.01.2024
Verlag: Springer Berlin Heidelberg
Erschienen in: Microsystem Technologies / Ausgabe 12/2024
Print ISSN: 0946-7076
Elektronische ISSN: 1432-1858
DOI: https://doi.org/10.1007/s00542-023-05589-5

A differential evolution modified quantum PSO algorithm for social welfare maximisation in smart grids considering demand response and renewable generation

Technical Paper

A new ECC implemented by FPGA with favorable combined performance of speed and area for lightweight IoT edge devices

Technical Paper

On the stability of Markov feedback loops of a microsystem

Technical Paper

Numerical study of a novel electroosmotic active micromixer with twin diamond-shaped chambers and sawteeth

Technical Paper

Unsupervised anomaly detection in the textile texture database

Technical Paper

Development and application of environmentally friendly and low-cost functionalized graphene powder for thermal dissipation market

Technical Paper