Skip to main content
Erschienen in:
Buchtitelbild

2024 | OriginalPaper | Buchkapitel

1. Designing Accelerated Vibration Tests Using Model-Based Equivalent Damage Prediction

verfasst von : Taylor Kinnard, Davis McMullan, Katherine Pane, Garrison S. Flynn, Thomas Thompson, Keegan Moore

Erschienen in: Dynamic Environments Testing, Volume 7

Verlag: Springer Nature Switzerland

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The use of vibration testing to complete qualification of critical components is important for a wide variety of industries to understand the life cycles of their products in operational environments. A common problem with testing components to failure is the time and cost associated with mimicking the full life of a part, creating a need for shorter-duration testing that provides comparable life cycle information. The most common methods that accelerate damage tests use Miner’s Rule, an equation that sums damage percentages caused by varying stress amplitudes. The aim of using Miner’s Rule in damage analysis is to find a shorter-duration test cycle that will provide equivalent damage to the part’s real-world environment. This method has demonstrated accuracy under constant amplitude loading but loses reliability under variable amplitude loadings due to its lack of regard toward the loading sequence. Furthermore, translating from a stress-cycle (SN) curve to design amplitudes for testing requires system knowledge. Finally, the entire process of damage equivalence for additively manufactured (AM) parts is minimally explored in current research. This study seeks to improve the quality of test acceleration by utilizing models of the system under test to not only provide a method for faster, more accurate equivalent damage analysis but also to fill a void of a lack of information regarding test compression of AM parts. To do this, AM specimens designed with a failure point under a complex stress history are evaluated. First, parts are vibration tested on a shaker to achieve experimental failure time. Next, the base inputs used for experimentation are modeled in simulation to evaluate theoretical failure time. Finally, test results of the experimental setup and simulated environment were compared to evaluate the accuracy of Miner’s rule in equivalent damage analysis, as well as test accuracy of SN curves for designing tests of AM parts.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Miner, M.A.: Cumulative damage in fatigue. J. Appl. Mech. 12(3), 159–164 (1945)CrossRef Miner, M.A.: Cumulative damage in fatigue. J. Appl. Mech. 12(3), 159–164 (1945)CrossRef
2.
Zurück zum Zitat Safai, L., Cuellar, J.S., Smit, G., Zadpoor, A.A.: A review of the fatigue behavior of 3D printed polymers. Addit. Manuf. 28, 87–97 (2019) Safai, L., Cuellar, J.S., Smit, G., Zadpoor, A.A.: A review of the fatigue behavior of 3D printed polymers. Addit. Manuf. 28, 87–97 (2019)
3.
Zurück zum Zitat Head, A.K., Hooke, F.H.: Fatigue of metals under random loads. Nature. 177(4521), 1176–1177 (1956)CrossRef Head, A.K., Hooke, F.H.: Fatigue of metals under random loads. Nature. 177(4521), 1176–1177 (1956)CrossRef
4.
Zurück zum Zitat Jang, J., Khonsari, M.M.: On the prediction of fatigue life subjected to variable loading sequence. Fatigue Fract. Eng. Mater. Struct. 44(11), 2962–2974 (2021)CrossRef Jang, J., Khonsari, M.M.: On the prediction of fatigue life subjected to variable loading sequence. Fatigue Fract. Eng. Mater. Struct. 44(11), 2962–2974 (2021)CrossRef
5.
Zurück zum Zitat Manson, S.S., Halford, G.R.: Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage. Int. J. Fract. 17(2), 169–192 (1981)CrossRef Manson, S.S., Halford, G.R.: Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage. Int. J. Fract. 17(2), 169–192 (1981)CrossRef
6.
Zurück zum Zitat Henderson, G.R., Piersol, A.G.: Fatigue damage related descriptor for random vibration test environments. J. Sound Vib. 29(10), 20–24 (1995) Henderson, G.R., Piersol, A.G.: Fatigue damage related descriptor for random vibration test environments. J. Sound Vib. 29(10), 20–24 (1995)
7.
Zurück zum Zitat Maatman, J.: A study of fatigue damage with application to vibration testing. Blucher Eng. Proc. 2(1) (2015) Maatman, J.: A study of fatigue damage with application to vibration testing. Blucher Eng. Proc. 2(1) (2015)
8.
Zurück zum Zitat Van Baren, J., Van Baren, P., Jenison, M.I.: The fatigue damage spectrum and kurtosis control. J. Sound Vib. 46(10), 10 (2012) Van Baren, J., Van Baren, P., Jenison, M.I.: The fatigue damage spectrum and kurtosis control. J. Sound Vib. 46(10), 10 (2012)
9.
Zurück zum Zitat Lalanne, C.: Mechanical Vibration and Shock Analysis, Fatigue Damage, vol. 4. Wiley (2014) Lalanne, C.: Mechanical Vibration and Shock Analysis, Fatigue Damage, vol. 4. Wiley (2014)
10.
Zurück zum Zitat Fatemi, A., Yang, L.: Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogenous materials. Int. J. Fatigue. 20(1), 9–34 (1998)CrossRef Fatemi, A., Yang, L.: Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogenous materials. Int. J. Fatigue. 20(1), 9–34 (1998)CrossRef
11.
Zurück zum Zitat Angeli, A., Cornelis, B., Troncossi, M.: Synthesis of Sine-on-Random vibration profiles for accelerated life tests based on fatigue damage spectrum equivalence. Mech. Syst. Signal Process. 103, 340–351 (2018)CrossRef Angeli, A., Cornelis, B., Troncossi, M.: Synthesis of Sine-on-Random vibration profiles for accelerated life tests based on fatigue damage spectrum equivalence. Mech. Syst. Signal Process. 103, 340–351 (2018)CrossRef
12.
Zurück zum Zitat Ge, C.: Model of accelerated vibration test. Packag. Technol. Sci. 13, 7–11 (2000)CrossRef Ge, C.: Model of accelerated vibration test. Packag. Technol. Sci. 13, 7–11 (2000)CrossRef
13.
Zurück zum Zitat Palanisamy, C., Raman, R.: Additive Manufacturing: A Review on Mechanical Properties of Polyjet and FDM Printed Parts, pp. 1–52. Polymer Bulletin (2021) Palanisamy, C., Raman, R.: Additive Manufacturing: A Review on Mechanical Properties of Polyjet and FDM Printed Parts, pp. 1–52. Polymer Bulletin (2021)
14.
Zurück zum Zitat Kersch, K., Schmidt, A., Woschke, E.: Multiaxial fatigue damage evaluation: A new method based on modal velocities. J. Sound Vib. 476 (2020) Kersch, K., Schmidt, A., Woschke, E.: Multiaxial fatigue damage evaluation: A new method based on modal velocities. J. Sound Vib. 476 (2020)
15.
Zurück zum Zitat Gaberson, H.A., Chalmers, R.H.: Modal velocity as a criterion of shock severity. Shock Vib. 40 (1969) Gaberson, H.A., Chalmers, R.H.: Modal velocity as a criterion of shock severity. Shock Vib. 40 (1969)
Metadaten
Titel
Designing Accelerated Vibration Tests Using Model-Based Equivalent Damage Prediction
verfasst von
Taylor Kinnard
Davis McMullan
Katherine Pane
Garrison S. Flynn
Thomas Thompson
Keegan Moore
Copyright-Jahr
2024
DOI
https://doi.org/10.1007/978-3-031-34930-0_1