nach oben

European Journal of Wood and Wood Products

Erschienen in:

16.03.2016 | Original

Determination of optimal machining parameters of massive wooden edge glued panels which is made of Scots pine (Pinus sylvestris L.) using Taguchi design method

verfasst von: Sait Dündar Sofuoglu

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 1/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, the optimization of CNC machining parameters was conducted using the Taguchi design method on the surface quality of massive wooden edge glued panels made of Scots pine (Pinus sylvestris L.). Five machining parameters and their effects on surface roughness were evaluated. These parameters included cutters type, tool clearance strategy, spindle speed, feed rate and depth of cut. An analysis of variance (ANOVA) was performed to identify significant factors affecting the surface roughness (R _a and R _z). Optimum machining parameter combinations were acquired by conducting an analysis of the signal-to-noise (S/N) ratio. Optimal cutting performance for R _a and R _z was obtained for Cutter 1, at a tool clearance strategy of a raster 16,000 rpm spindle speed, 1000 mm/min feed rate and 4 mm depth. Based on the results of the confirmation tests, R _a decreased 2.8 times and R _z decreased 2.0 times.

Vorheriger Artikel Strength grading on the basis of high resolution laser scanning and dynamic excitation: a full scale investigation of performance

Nächster Artikel Ultra-light particleboard: characterization of foam core layer by digital image correlation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Benotmane B, Zirouk S (2013) Analyzing the woodturning process using Taguchi methodology for dynamic systems. Sci Res Essay 8:2046–2058CrossRef

Costes JP, Larricq P (2002) Towards high cutting speed in wood milling. Ann For Sci 59:857–865CrossRef

Davim JP (2011) Wood machining. Wiley, New YorkCrossRef

Davim JP, Clemente VC, Silva S (2009) Surface roughness aspects in milling MDF (medium density fibreboard). Int J Adv Manuf Technol 40:49–55CrossRef

Gologlu C, Sakarya N (2008) The effects of cutter path strategies on surface roughness of pocket milling of 1.2738 steel based on Taguchi method. J Mater Process Technol 206:7–15CrossRef

Hiziroglu S (1996) Surface roughness analysis of wood composites: a stylus method. For Prod J 46:67–72

Hiziroglu S, Graham M (1998) Effect of press closing time and target thickness on surface roughness of particleboard. For Prod J 48:50–54

Iskra P, Tanaka C (2005) The influence of wood fiber direction, feed rate, and cutting width on sound intensity during routing. Holz Roh-Werkst 63:167–172CrossRef

ISO 3130 (1975) Wood—determination of moisture content for physical and mechanical tests. International Organization for Standardization, Geneva

ISO 3131 (1975) Wood—determination of density for physical and mechanical tests. International Organization for Standardization, Geneva

ISO 3274 (2005) Geometrical product specifications (GPS)—surface texture: profile method—nominal characteristics of contact (stylus) instruments. International Organization for Standardization, Geneva

ISO 4287 (1997) Geometrical product specifications surface texture profile method terms, definitions and surface texture parameters, vol ISO 4287. International Organization for Standardization, Geneva

ISO 468 (2009) Surface roughness-parameters, their values and general rules for specifying requirements. International Organization for Standardization, Geneva

Kacal A, Gulesin M (2011) Determination of optimal cutting conditions in finish turning of austempered ductile iron using Taguchi design method. J Sci Ind Res 70:278–283

Karagoz U, Akyildiz M, Isleyen O (2011) Effect of heat treatment on surface roughness of thermal wood machined by CNC. Proligno 7:50–58

Li T, J-b Cai, D-g Zhou (2013) Optimization of the combined modification process of thermo-mechanical densification and heat treatment on Chinese fir wood. BioResources 8:5279–5288

Mitchell PH, Lemaster RL (2002) Investigation of machine parameters on the surface quality in routing soft maple. For Prod J 52:85–90

Nalbant M, Gokkaya H, Sur G (2007) Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. Mater Des 28:1379–1385dCrossRef

Ohuchi T, Murase Y (2005) Milling of wood and wood-based materials with a computerized numerically controlled router IV: development of automatic measurement system for cutting edge profile of throw-away type straight bit. J Wood Sci 51:278–281CrossRef

Sandak J, Tanaka C (2003) Evaluation of surface smoothness by laser displacement sensor—1: effect of wood species. J Wood Sci 49:305–311CrossRef

Sutcu A (2013) Investigation of parameters affecting surface roughness in CNC routing operation on wooden EGP. BioResources 8:795–805CrossRef

Sutcu A, Karagoz U (2012) Effect of machining parameters on surface quality after face milling of MDF. Wood Res 57:231–240

Taguchi G, Elsayed E, Hsiang T (1989) Quality engineering in production system Taguchi. McGraw-Hill, New York

Valarmathi TN, Palanikumar K, Sekar S (2013a) Prediction of parametric influence on thrust force in drilling of wood composite panels. Indian J Sci Technol 6:4347–4356

Valarmathi TN, Palanikumar K, Sekar S (2013b) Prediction of parametric influence on thrust force in drilling of wood composite panels. IJMMME 1:71–74

Wilkowski J, Czarniak P, Grześkiewicz M (2011) Machinability evaluation of thermally modified wood using the Taguchi technique. In: COST Action FP0904 Workshop “Mechano-chemical transformations of wood during Thermo-Hydro-Mechanical (THM) processing”. pp 109–111

Wilkowski J, Rousek M, Svoboda E, Kopecky Z, Czarniak P (2013) Analysis of the influence of cutting parameters on Surface roughness of milled wood based on Taguchi techniques Annals of Warsaw University of Life Sciences—SGGW. For Wood Technol 84:321–325

Zhong ZW, Hiziroglu S, Chan CTM (2013) Measurement of the surface roughness of wood based materials used in furniture manufacture. Measurement 46:1482–1487CrossRef

Titel: Determination of optimal machining parameters of massive wooden edge glued panels which is made of Scots pine (Pinus sylvestris L.) using Taguchi design method
verfasst von: Sait Dündar Sofuoglu
Publikationsdatum: 16.03.2016
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 1/2017
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-016-1028-z

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2017

Influence of face-to-core layer ratio and core layer resin content on the properties of density-decreased particleboards

Editorial

Strength grading on the basis of high resolution laser scanning and dynamic excitation: a full scale investigation of performance

Orthogonal model and experimental data for analyzing wood-fiber-based tri-axial ribbed structural panels in bending

Effect of the knife-incising pretreatment on the surface checks occurrence of red pine heavy timber after drying

Determining the curing parameters of furfuryl alcohol for wood modification by nanoindentation