Skip to main content
main-content

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

22.11.2019 | Original Research | Ausgabe 6/2020 Open Access

International Journal of Material Forming 6/2020

Determination of the critical value of damage in a channel-die rotational compression test

Zeitschrift:
International Journal of Material Forming > Ausgabe 6/2020
Autoren:
Z. Pater, J. Tomczak, T. Bulzak, Ł. Wójcik, P. Walczuk
Wichtige Hinweise

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Abstract

This article describes the problems involved in modelling material cracking in skew rolling processes. The use of the popular damage criteria is impossible because of the lack of a calibration test that would make it possible to determine the critical value of material damage under conditions similar to those found in skew rolling. To fill this gap, a test called channel-die rotational compression was proposed. It consisted of rolling a disk-shaped specimen in a cavity created by two channels of cooperating tools (flat dies), which had heights smaller than the diameter of the specimen. When the rolling path was sufficiently long, a crack formed in the axial zone of the specimen. In this test, modelling using the finite element method made it possible to determine the critical values of material damage. As an illustration, the test was used to determine the critical damage value when conducting a rotational compression process on 50HS steel (1.5026) specimens formed in the temperature range of 950–1200 °C. The analysis was conducted using the Cockcroft–Latham damage criterion.
Literatur
Über diesen Artikel

Weitere Artikel der Ausgabe 6/2020

International Journal of Material Forming 6/2020 Zur Ausgabe

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise