Skip to main content

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

Erschienen in: Strength of Materials 2/2022

13.06.2022

Determination of Ultimate Stresses in Materials under Complex Repeated-Alternating Loading

verfasst von: A. V. Bashta

Erschienen in: Strength of Materials | Ausgabe 2/2022

Einloggen, um Zugang zu erhalten
share
TEILEN

Abstract

Based on the results of the experimental studies and the data given in the literature, the methodology of determining the endurance limits of structural materials during a complex stressed state in a wide range of cyclic loads is proposed. The semi-empirical dependence, which is suggested, makes it possible to calculate the values of ultimate stresses in the safest ratio, and the use of the straight line, which is set by the angle tangent on the plane combined with the Serensen classical criterion to determine the least safe ratio of them. The use of the proposed hyperbolic curve to determine the ultimate stresses increases the values of safe amplitudes for the whole interval of their interaction and reduces the difference between safe and un safe values. Its advantage in dtermining the amplitudes of such stresses, the amount of necessary tests is considerably reduced. And, taking into account the indicated margin of safety (12–14%) of analytical calculations for well-studied structural materials for linear (uniaxial) cyclic stressed state, in some cases, it is possible to avoid their experimental verification. At the same time, a wider range of information about the physical and mechanical properties of the material under study is used. It is established that the difference in the values of amplitude stresses calculated by the proposed method and experimental data in the specified range of jointly acting limit values contributes to the strength reserve and reliability on the endurance limit of real structural elements operating under conditions of repeatedly alternating loads.
Literatur
1.
Zurück zum Zitat N. N. Afanas’ev, Statistical Theories of Fatigue Strength of Materials [in Russian], Ukrainian Academy of Sciences, Kiev (1953). N. N. Afanas’ev, Statistical Theories of Fatigue Strength of Materials [in Russian], Ukrainian Academy of Sciences, Kiev (1953).
2.
Zurück zum Zitat D. N. Gol’tsev, On the Conditions of Strength under Variable Loads and Complex Stress State. Problems of Dynamics and Dynamic Strength [in Russian], LSSR, Riga (1953). D. N. Gol’tsev, On the Conditions of Strength under Variable Loads and Complex Stress State. Problems of Dynamics and Dynamic Strength [in Russian], LSSR, Riga (1953).
3.
Zurück zum Zitat I. A. Oding, “Theory of fatigue limits of metals in unsymmetrical cycles and in complex tense state,” Zavod. Lab., No. 4, 14–23 (1937). I. A. Oding, “Theory of fatigue limits of metals in unsymmetrical cycles and in complex tense state,” Zavod. Lab., No. 4, 14–23 (1937).
4.
Zurück zum Zitat G. S. Pisarenko and A. A. Lebedev, Deformation and Strength of Materials under Complex Stress State [in Russian], Naukova Dumka, Kiev (1967). G. S. Pisarenko and A. A. Lebedev, Deformation and Strength of Materials under Complex Stress State [in Russian], Naukova Dumka, Kiev (1967).
5.
Zurück zum Zitat S. V. Serensen, On Fatigue Resistance under Complex Stress State and Symmetrical Cycle. Some Problems of Fatigue Strength of Steel [in Russian], Mashgiz, Moscow (1953). S. V. Serensen, On Fatigue Resistance under Complex Stress State and Symmetrical Cycle. Some Problems of Fatigue Strength of Steel [in Russian], Mashgiz, Moscow (1953).
6.
Zurück zum Zitat I. A. Oding, Permissible Stresses in Mechanical Engineering and Cyclic Strength of Metals [in Russian], Mashgiz, Moscow (1947). I. A. Oding, Permissible Stresses in Mechanical Engineering and Cyclic Strength of Metals [in Russian], Mashgiz, Moscow (1947).
7.
Zurück zum Zitat V. T. Troshchenko, Deformation and Fracture of Metals under Multi-Cycle Loading [in Russian], Naukova Dumka, Kiev (1981). V. T. Troshchenko, Deformation and Fracture of Metals under Multi-Cycle Loading [in Russian], Naukova Dumka, Kiev (1981).
8.
Zurück zum Zitat V. T. Troshchenko, Cyclic Deformation and Fatigue of Metals [in Russian], Naukova Dumka, Kiev (1985). V. T. Troshchenko, Cyclic Deformation and Fatigue of Metals [in Russian], Naukova Dumka, Kiev (1985).
9.
Zurück zum Zitat H. I. Gough, “Engineering steels under combined and static stresses stresses,” Proc. Inst. Mech. Eng., 160, No. 4, 417–440 (1949). CrossRef H. I. Gough, “Engineering steels under combined and static stresses stresses,” Proc. Inst. Mech. Eng., 160, No. 4, 417–440 (1949). CrossRef
11.
Zurück zum Zitat G. V. Uzhik, “Strength of metals and effect of stress concentration in bending with torsion under symmetrical cycles of variable loads,” Vestn. Mashinostr., No. 7, 17–26 (1951). G. V. Uzhik, “Strength of metals and effect of stress concentration in bending with torsion under symmetrical cycles of variable loads,” Vestn. Mashinostr., No. 7, 17–26 (1951).
Metadaten
Titel
Determination of Ultimate Stresses in Materials under Complex Repeated-Alternating Loading
verfasst von
A. V. Bashta
Publikationsdatum
13.06.2022
Verlag
Springer US
Erschienen in
Strength of Materials / Ausgabe 2/2022
Print ISSN: 0039-2316
Elektronische ISSN: 1573-9325
DOI
https://doi.org/10.1007/s11223-022-00397-0

Weitere Artikel der Ausgabe 2/2022

Strength of Materials 2/2022 Zur Ausgabe

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.