nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

Determining Optimum Gear Ratios for a Four-Stage Helical Gearbox for Getting Minimum Gearbox Cost

verfasst von : Nguyen Huu Quang, Nguyen Thanh Tu, Nguyen Hong Linh, Nguyen Huu Luan, Le Hoang Anh, Nguyen Anh Tuan, Tran Ngoc Giang, Vu Ngoc Pi

Erschienen in: Advances in Engineering Research and Application

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper presents the research results to determine the optimal partial gear ratios of the four-speed helical gearbox based on the cost optimization problem. To solve that problem, a simulation experiment with 13 input parameters was designed and conducted. The influence of the input parameters on the optimum gear ratios was evaluated. In addition, regression formulas to determine the optimum partial ratios to achieve the smallest gearbox cost have been proposed. These formulas are easy to use because they are all in the form of explicit functions.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Determining Optimal Transmission Ratios of Worm Helical Gearbox for Minimum Gearbox Cost

Nächstes Kapitel Dynamic Response of Aluminum-Alloy Plates Subjected to Repeated Impacts

Bartelmus, W., et al.: Modelling of gearbox dynamics under time-varying nonstationary load for distributed fault detection and diagnosis. Eur. J. Mech. A/Solids 29(4), 637–646 (2010)CrossRef

Medina, R., et al.: Vibration signal analysis using symbolic dynamics for gearbox fault diagnosis. Int. J. Adv. Manuf. Technol. 104(5–8), 2195–2214 (2019). https://doi.org/10.1007/s00170-019-03858-0CrossRef

Chaari, F., Zimroz, R., Bartelmus, W., Fakhfakh, T., Haddar, M.: Model based investigation on a two stages gearbox dynamics under non-stationary operations. In: Fakhfakh, T., Bartelmus, W., Chaari, F., Zimroz, R., Haddar, M. (eds.) Condition Monitoring of Machinery in Non-Stationary Operations, pp. 133–142. Springer, Heidelberg (2012). https://doi.org/10.1007/978-3-642-28768-8_14

Fan, X., Zuo, M.J.: Gearbox fault detection using Hilbert and wavelet packet transform. Mech. Syst. Signal Process. 20(4), 966–982 (2006)CrossRef

Lei, Y., et al.: Planetary gearbox fault diagnosis using an adaptive stochastic resonance method. Mech. Syst. Signal Process. 38(1), 113–124 (2013)CrossRef

Zhang, Z., Verma, A., Kusiak, A.: Fault analysis and condition monitoring of the wind turbine gearbox. IEEE Trans. Energy Convers. 27(2), 526–535 (2012)CrossRef

Inoue, K., Yamanaka, M., Kihara, M.: Optimum stiffener layout for the reduction of vibration and noise of gearbox housing. J. Mech. Des. 124(3), 518–523 (2002)CrossRef

Guan, Y.H., Lim, T.C., Shepard, W.S.: Experimental study on active vibration control of a gearbox system. J. Sound Vib. 282(3–5), 713–733 (2005)CrossRef

Nayak, U., Aravind, S., Aundhekar, S.: Influence of gear geometry on gearbox noise reduction-an experimental investigation. SAE Int. J. Commer. Veh. 7(2014-01-9029), 746–752 (2014)

10.

Wang, L., et al.: Wind turbine gearbox failure identification with deep neural networks. IEEE Trans. Ind. Inf. 13(3), 1360–1368 (2016)CrossRef

11.

Zhao, M., Ji, J.: Dynamic analysis of wind turbine gearbox components. Energies 9(2), 110 (2016)CrossRef

12.

Hong, T.T., et al.: Calculating optimum gear ratios of two step bevel helical reducer. Int. J. Appl. Eng. Res 14, 3494–3499 (2019)

13.

Pi, V.N.: A method for optimal calculation of total transmission ratio of two step helical gearboxes. In: Proceedings of the National Conference on Engineering Mechanics (2001)

14.

Tuan, N.K., et al.: Determining optimal gear ratios of a two-stage helical reducer for getting minimal acreage of cross section. In: MATEC Web of Conferences. EDP Sciences (2018)

15.

Hung, L.X. et al.: Calculation of optimum gear ratios of mechanical driven systems using two-stage helical gearbox with first stage double gear sets and chain drive. In: Sattler, K.U., Nguyen, D., Vu, N., Tien Long, B., Puta, H. (eds.) ICERA 2019. LNNS, vol. 104, pp. 170–178. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-37497-6_20

16.

Cam, N.T.H., et al.: Calculating optimum gear ratios of mechanical drive systems using two-stage helical gearbox with second-stage double gear sets and chain drive for minimum gearbox length. In: Sattler, K.-U., Nguyen, D.C., Vu, N.P., Tien Long, B., Puta, H. (eds.) ICERA 2019. LNNS, vol. 104, pp. 155–163. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-37497-6_18CrossRef

17.

Pi, V.N.: A study on optimal determination of partial transmission ratios of helical gearboxes with second-step double gear-sets. Proc. World Acad. Sci. 27, 113–116 (2008)

18.

Vu, N.-P., et al.: The influence of main design parameters on the overall cost of a gearbox. Appl. Sci. 10(7), 2365 (2020)CrossRef

19.

Pi, V.N., Tuan, N.K., Hung, L.X., Cam, N.T.H., Thao, T.T.P.: Determining optimum partial transmission ratios of mechanical driven systems using a V-belt drive and a three-stage helical reducer. In: Awang, M., Emamian, S., Yusof, F. (eds.) Advances in Material Sciences and Engineering. LNME, pp. 81–88. Springer, Singapore (2020). https://doi.org/10.1007/978-981-13-8297-0_11

20.

Cam, N.T.H., Pi, V.N., Tuan, N.K., Hung, L.X., Thao, T.T.P.: A study on determination of optimum partial transmission ratios of mechanical driven systems using a chain drive and a three-step helical reducer. In: Fujita, H., Nguyen, D., Vu, N., Banh, T., Puta, H. (eds.) ICERA 2018. LNNS, vol. 63, pp, 91–99. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-04792-4_14

21.

Pi, V.N.: Optimal calculation of partial transmission ratios for four-step helical gearboxes with first and third-step double gear-sets for minimal gearbox length. In: American Conference on Applied Mathematics (MATH 2008), Harvard, Massachusetts, USA (2008)

22.

Pi, V.N., et al.: Cost optimization study of two-step helical gearboxes with first stage double gear sets. Int. J. Mech. Prod. Eng. Res. Dev. (Ijmperd) 10, 573–584 (2020)

23.

Toolbox, T.E.: Density, Specific Weight and Specific Gravity. https://www.engineeringtoolbox.com/density-specific-weight-gravity-d_290.html. Accessed 27 May 2021

24.

Römhild, I., Linke, H.: Gezielte Auslegung Von Zahnradgetrieben mit minimaler Masse auf der Basis neuer Berechnungsverfahren. Konstruktion 44(7–8), 229–236 (1992)

25.

Trinh Chat, L.V.U.: Calculation of Mechanical Driven Systems. Education Publisher (2008). (in Vietnamse)

Titel: Determining Optimum Gear Ratios for a Four-Stage Helical Gearbox for Getting Minimum Gearbox Cost
verfasst von: Nguyen Huu Quang
Nguyen Thanh Tu
Nguyen Hong Linh
Nguyen Huu Luan
Le Hoang Anh
Nguyen Anh Tuan
Tran Ngoc Giang
Vu Ngoc Pi
Verlag: Springer International Publishing
Buch: Advances in Engineering Research and Application
Print ISBN: 978-3-030-92573-4

Electronic ISBN: 978-3-030-92574-1

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-030-92574-1_36

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht