nach oben

Microsystem Technologies

Erschienen in:

05.03.2020 | Technical Paper

Development of a novel low-temperature differential hollow roller using an ultra-thin heating element of graphene polymeric composite material

verfasst von: Kun-Cheng Ke, Li-Jian Lin, Sen-Yeu Yang

Erschienen in: Microsystem Technologies | Ausgabe 8/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, an easy and low-temperature differential hollow roller using an ultra-thin heating element of graphene polymeric composite material by wire bar coating technique was first demonstrated and fabricated successfully. In contrast to the conventional hot roller, this study confirmed the flexibility of high uniform temperature distribution in the rolling system. The dynamic-state temperature differential of four quarter positions and horizontal positions can be controlled within 2.8 °C and 1.2 °C with a voltage of 40 V, respectively. High-Temperature stability of long-term steady-state temperature was confirmed and the voltage only needs 25 V to get a steady-state temperature of almost 160 °C.

Vorheriger Artikel Design and simulation of capacitive SPDT RF MEMS switch to improve its isolation

Nächster Artikel Design and simulation of RF MEMS shunt capacitive switch with non-uniform meanders for C-band applications

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

de Abajo J, de la Campa JG (1999) Processable aromatic polyimides. Progress in polyimide chemistry I. Springer, Berlin, pp 23–59CrossRef

Abdullah SI, Ansari MNM (2015) Mechanical properties of graphene oxide (GO)/epoxy composites. HBRC J 11:151–156. https://doi.org/10.1016/j.hbrcj.2014.06.001 CrossRef

Bae JJ, Lim SC, Han GH et al (2012) Heat dissipation of transparent graphene defoggers. Adv Funct Mater 22:4819–4826. https://doi.org/10.1002/adfm.201201155 CrossRef

Chang J-H, Yang S-Y (2005) Development of fluid-based heating and pressing systems for micro hot embossing. Microsyst Technol 11:396–403. https://doi.org/10.1007/s00542-004-0481-5 CrossRef

Chen C-H, Lee Y-C, Chen C-D, et al (2008) Roller imprinting based on focus infrared heating. In: 2008 3rd IEEE international conference on nano/micro engineered and molecular systems, pp 877–880

Ederth J, Johnsson P, Niklasson GA et al (2003) Electrical and optical properties of thin films consisting of tin-doped indium oxide nanoparticles. Phys Rev B 68:155410. https://doi.org/10.1103/PhysRevB.68.155410 CrossRef

Huang X, Qi X, Boey F, Zhang H (2012) Graphene-based composites. Chem Soc Rev 41:666–686. https://doi.org/10.1039/C1CS15078B CrossRef

Ke K-C, Cheng C, Lin L-J, Yang S-Y (2018) A novel flexible heating element using graphene polymeric composite ink on polyimide film. Microsyst Technol. https://doi.org/10.1007/s00542-018-3824-3 CrossRef

Marinho B, Ghislandi M, Tkalya E et al (2012) Electrical conductivity of compacts of graphene, multi-wall carbon nanotubes, carbon black, and graphite powder. Powder Technol 221:351–358. https://doi.org/10.1016/j.powtec.2012.01.024 CrossRef

McKeen LW (ed) (2017) 7—Polyimides. In: Permeability properties of plastics and elastomers (4th edn). William Andrew Publishing, pp 115–127

Ogura R, Shimizu T, Shiratori T, Yang M (2017) Development of a novel resistance heating system for microforming by modifying surface of dies. Procedia Eng 207:1016–1021. https://doi.org/10.1016/j.proeng.2017.10.1123 CrossRef

Papageorgiou DG, Kinloch IA, Young RJ (2017) Mechanical properties of graphene and graphene-based nanocomposites. Prog Mater Sci 90:75–127. https://doi.org/10.1016/j.pmatsci.2017.07.004 CrossRef

Park SK, Han JI, Kim WK, Kwak MG (2001) Deposition of indium–tin-oxide films on polymer substrates for application in plastic-based flat panel displays. Thin Solid Films 397:49–55. https://doi.org/10.1016/S0040-6090(01)01489-4 CrossRef

Quiñones R, Brown RT, Searls N, Richards-Waugh L (2018) Study of polymorphism using patterned self-assembled monolayers approach on metal substrates. Appl Surf Sci 427:97–105. https://doi.org/10.1016/j.apsusc.2017.08.164 CrossRef

Raji A-RO, Varadhachary T, Nan K et al (2016) Composites of graphene nanoribbon stacks and epoxy for joule heating and deicing of surfaces. ACS Appl Mater Interfaces 8:3551–3556. https://doi.org/10.1021/acsami.5b11131 CrossRef

Shih Y-M, Kao C-C, Ke K-C, Yang S-Y (2017) Imprinting of double-sided microstructures with rapid induction heating and gas-assisted pressuring. J Micromech Microeng 27:095012. https://doi.org/10.1088/1361-6439/aa7acd CrossRef

Sui D, Huang Y, Huang L et al (2011) Flexible and transparent electrothermal film heaters based on graphene materials. Small 7:3186–3192CrossRef

Tan L, Zeng M, Wu Q et al (2015) Direct growth of ultrafast transparent single-layer graphene defoggers. Small 11:1840–1846. https://doi.org/10.1002/smll.201402427 CrossRef

Vert R, Carles P, Laborde E et al (2012) Adhesion of ceramic coating on thin and smooth metal substrate: a novel approach with a nanostructured ceramic interlayer. J Therm Spray Technol 21:1128–1134. https://doi.org/10.1007/s11666-012-9798-2 CrossRef

Yaralioglu G (2011) Ultrasonic heating and temperature measurement in microfluidic channels. Sens Actuators Phys 170:1–7. https://doi.org/10.1016/j.sna.2011.05.012 CrossRef

Titel: Development of a novel low-temperature differential hollow roller using an ultra-thin heating element of graphene polymeric composite material
verfasst von: Kun-Cheng Ke
Li-Jian Lin
Sen-Yeu Yang
Publikationsdatum: 05.03.2020
Verlag: Springer Berlin Heidelberg
Erschienen in: Microsystem Technologies / Ausgabe 8/2020
Print ISSN: 0946-7076
Elektronische ISSN: 1432-1858
DOI: https://doi.org/10.1007/s00542-020-04796-8

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Nachhaltigkeitsaward Key Visual/© Cometis AG/Global ESG Monitor | Daniel Rupp | Generiert mit KI, Search Icon, Banner Hanser, Arbeitszeit/© granata68 / Fotolia, E-Autos im Fuhrpark: Lohnt sich das noch?/© Petair / stock.adobe.com, Kryptowährungen/© gopixa / Getty Images / iStock, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Sustainibility Finance/© Robert Kneschke / stock.adobe.com / Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2020

Thermo-mechanical vibration of FG curved nanobeam containing porosities and reinforced by graphene platelets

Correction to: A class of biaxial micro/meso-scale structures for isotropic in-plane inertial sensing and actuation: design, fabrication and experiments

Hydrodynamic mobility of a porous spherical particle with variable permeability in a spherical cavity

A class of biaxial micro/meso-scale structures for isotropic in-plane inertial sensing and actuation: design, fabrication and experiments

Instability analysis of bi-axial micro-scanner under electromagnetic actuation including small scale and damping effects

Design and simulation of RF MEMS shunt capacitive switch with non-uniform meanders for C-band applications

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.