Skip to main content
main-content

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

Erschienen in: Physics of Metals and Metallography 5/2022

01.05.2022 | STRENGTH AND PLASTICITY

Development of Radiation Porosity in the Material of Fuel-Element Cladding Produced by Different Technologies for Fast Neutron Reactors and Its Influence on the Fuel Assembly Service Life in the BN-600 Reactor

verfasst von: A. R. Isinbaev, I. A. Portnykh, A. V. Kozlov

Erschienen in: Physics of Metals and Metallography | Ausgabe 5/2022

Einloggen, um Zugang zu erhalten
share
TEILEN

Abstract

The dependence of the concentration of point defects in austenitic corrosion-resistant chromium-nickel steel (ChS68) on the characteristics of radiation porosity under neutron irradiation is studied within a statistical model of the migration of point defects. The results obtained are used to analyze the data of experimental determination of the characteristics of radiation porosity in ChS68 steel samples irradiated at various dose-temperature parameters. The critical diameters of vacancy void nuclei are calculated, and it is shown that, with an increase in the integral surface area of the voids, the concentration of point defects decreases, while the critical diameter increases. This leads to a multimodal void size distribution. Based on the experimental results obtained, within the model of the final stage of nonstationary swelling, the residual service life was calculated according to the criterion of the maximum allowable swelling of the fuel-element claddings under study.
Literatur
1.
Zurück zum Zitat I. I. Ovchinnikov, I. G. Ovchinnikov, M. Yu. Bogina, and A. V. Matora, “Influence of radiation environments on the mechanical characteristics of materials and the behavior of structures (review),” Internet-Zhurn. “Naukovedenie”, No. 4, 110TBH412 (2012). I. I. Ovchinnikov, I. G. Ovchinnikov, M. Yu. Bogina, and A. V. Matora, “Influence of radiation environments on the mechanical characteristics of materials and the behavior of structures (review),” Internet-Zhurn. “Naukovedenie”, No. 4, 110TBH412 (2012).
2.
Zurück zum Zitat M. Griffiths, “Effect of neutron irradiation on the mechanical properties, swelling and creep of austenitic stainless steels,” Materials 14, No. 10, 1–14 (2021). CrossRef M. Griffiths, “Effect of neutron irradiation on the mechanical properties, swelling and creep of austenitic stainless steels,” Materials 14, No. 10, 1–14 (2021). CrossRef
3.
Zurück zum Zitat M. V. Bakanov, V. V. Mal’tsev, N. N. Oshkanov, and V. V. Chuev, “The main results of monitoring the performance of fuel rods with cladding made of austenitic steels of a new generation,” Izv. Vuzov. Yadernaya Energetika, No. 1, 187–195 (2011). M. V. Bakanov, V. V. Mal’tsev, N. N. Oshkanov, and V. V. Chuev, “The main results of monitoring the performance of fuel rods with cladding made of austenitic steels of a new generation,” Izv. Vuzov. Yadernaya Energetika, No. 1, 187–195 (2011).
4.
Zurück zum Zitat E. V. Spitsyn, A. V. Tselishchev, and Yu. P. Budanov, “ Investigation of the influence of austenitizing annealing modes on the structural state and characteristics of long-term strength and creep of fuel rod pipes made of austenitic steel ChS68-ID,” VANT. Seriya: Materialovedenie i Novye Materialy, No. 2, 4–14 (2015). E. V. Spitsyn, A. V. Tselishchev, and Yu. P. Budanov, “ Investigation of the influence of austenitizing annealing modes on the structural state and characteristics of long-term strength and creep of fuel rod pipes made of austenitic steel ChS68-ID,” VANT. Seriya: Materialovedenie i Novye Materialy, No. 2, 4–14 (2015).
5.
Zurück zum Zitat A. V. Kozlov, I. A. Portnykh, and A. R. Isinbaev, “Model of the final stage of nonstationary radiation swelling of metals,” Phys. Met. Metallogr. 121, No. 7, 611–617 (2020). CrossRef A. V. Kozlov, I. A. Portnykh, and A. R. Isinbaev, “Model of the final stage of nonstationary radiation swelling of metals,” Phys. Met. Metallogr. 121, No. 7, 611–617 (2020). CrossRef
6.
Zurück zum Zitat B. Z. Margolin, I. P. Kursevich, A. A. Sorokina, N. K. Vasina, and V. S. Neustroev, “To the problem of irradiation-induced swelling and irradiation embrittlement of austenite steels. Part II. the basic physical and mechanical regularities,” Vopr. Materialoved., No. 2, 99–111 (2009). B. Z. Margolin, I. P. Kursevich, A. A. Sorokina, N. K. Vasina, and V. S. Neustroev, “To the problem of irradiation-induced swelling and irradiation embrittlement of austenite steels. Part II. the basic physical and mechanical regularities,” Vopr. Materialoved., No. 2, 99–111 (2009).
7.
Zurück zum Zitat A. V. Kozlov, “Dependence of the concentration of point defects in the ChS-68 austenitic steel on the rate of their generation and temperature upon neutron irradiation,” Phys. Met. Metallogr. 107, No. 6, 534–541 (2009). CrossRef A. V. Kozlov, “Dependence of the concentration of point defects in the ChS-68 austenitic steel on the rate of their generation and temperature upon neutron irradiation,” Phys. Met. Metallogr. 107, No. 6, 534–541 (2009). CrossRef
8.
Zurück zum Zitat D. A. Blokhin, V. M. Chernov, N. M. Mitrofanova, A. V. Tselishchev, and A. I. Blokhin, “Nuclear-physical properties of ChS68 and EK164 austenitic steels under long-term neutron irradiation in a reactor BN‑600,” VNIINM after academician A. A. Bochvar, No. 3, 23–37 (2015). D. A. Blokhin, V. M. Chernov, N. M. Mitrofanova, A. V. Tselishchev, and A. I. Blokhin, “Nuclear-physical properties of ChS68 and EK164 austenitic steels under long-term neutron irradiation in a reactor BN‑600,” VNIINM after academician A. A. Bochvar, No. 3, 23–37 (2015).
9.
Zurück zum Zitat A. V. Kozlov and I. A. Portnykh, “Dependence of the rate of steady-state swelling of fuel-element claddings made of ChS68 steel on the characteristics of neutron irradiation,” Phys. Met. Metallogr. 117, No. 8, 843–846 (2016). CrossRef A. V. Kozlov and I. A. Portnykh, “Dependence of the rate of steady-state swelling of fuel-element claddings made of ChS68 steel on the characteristics of neutron irradiation,” Phys. Met. Metallogr. 117, No. 8, 843–846 (2016). CrossRef
10.
Zurück zum Zitat N. M. Mitrofanova,“ Structural materials for fuel rod cladding and reactor fuel assemblies jackets BN-600,” Izv. Vuzov. Yadernaya Energetika, No. 1, 211–223 (2011). N. M. Mitrofanova,“ Structural materials for fuel rod cladding and reactor fuel assemblies jackets BN-600,” Izv. Vuzov. Yadernaya Energetika, No. 1, 211–223 (2011).
11.
Zurück zum Zitat A. V. Kozlov and I. A. Portnykh, “Migration and accumulation at dislocations of transmutation helium in austenitic steels upon neutron irradiation,” Phys. Met. Metallogr. 117, No. 4, 399–406 (2016). CrossRef A. V. Kozlov and I. A. Portnykh, “Migration and accumulation at dislocations of transmutation helium in austenitic steels upon neutron irradiation,” Phys. Met. Metallogr. 117, No. 4, 399–406 (2016). CrossRef
12.
Zurück zum Zitat A. R. Isinbaev, I. A. Portnykh, and A. V. Kozlov, “Influence of radiation porosity created in austenitic steel upon neutron irradiation on the concentration of intrinsic point defects,” Phys. Met. Metallogr. 121, No. 1, 89–94 (2020). CrossRef A. R. Isinbaev, I. A. Portnykh, and A. V. Kozlov, “Influence of radiation porosity created in austenitic steel upon neutron irradiation on the concentration of intrinsic point defects,” Phys. Met. Metallogr. 121, No. 1, 89–94 (2020). CrossRef
13.
Zurück zum Zitat I. A. Portnykh and A. V. Kozlov, “Growth in vacancy voids at the initial stage of transient swelling,” Phys. Met. Metallogr. 119, No. 6, 598–605 (2018). CrossRef I. A. Portnykh and A. V. Kozlov, “Growth in vacancy voids at the initial stage of transient swelling,” Phys. Met. Metallogr. 119, No. 6, 598–605 (2018). CrossRef
14.
Zurück zum Zitat A. V. Kozlov and I. A. Portnykh, “Conditions for the achievement of the stage of stationary radiation swelling,” Phys. Met. Metallogr. 103, No. 1, 105–109 (2007). CrossRef A. V. Kozlov and I. A. Portnykh, “Conditions for the achievement of the stage of stationary radiation swelling,” Phys. Met. Metallogr. 103, No. 1, 105–109 (2007). CrossRef
15.
Zurück zum Zitat A. R. Isinbaev, A. V. Kozlov, and I. A. Portnykh, “ Prediction of the residual life of fuel elements with a cladding made of steel EK164 after operation in the BN-600 reactor with a maximum damaging dose of 99 dpa,” VANT. Seriya: Materialovedenie i Novye Materialy 5, No. 101, 75–82 (2019). A. R. Isinbaev, A. V. Kozlov, and I. A. Portnykh, “ Prediction of the residual life of fuel elements with a cladding made of steel EK164 after operation in the BN-600 reactor with a maximum damaging dose of 99 dpa,” VANT. Seriya: Materialovedenie i Novye Materialy 5, No. 101, 75–82 (2019).
Metadaten
Titel
Development of Radiation Porosity in the Material of Fuel-Element Cladding Produced by Different Technologies for Fast Neutron Reactors and Its Influence on the Fuel Assembly Service Life in the BN-600 Reactor
verfasst von
A. R. Isinbaev
I. A. Portnykh
A. V. Kozlov
Publikationsdatum
01.05.2022
Verlag
Pleiades Publishing
Erschienen in
Physics of Metals and Metallography / Ausgabe 5/2022
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI
https://doi.org/10.1134/S0031918X22050052

Weitere Artikel der Ausgabe 5/2022

Physics of Metals and Metallography 5/2022 Zur Ausgabe