Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2020 | OriginalPaper | Buchkapitel

Development of Velocity Dependent Front Wheel Angle Relation Based on Tire Workload Distribution

verfasst von: G. Arjunbarath, P. V. Manivannan, C. Sujatha

Erschienen in: Advances in Dynamics of Vehicles on Roads and Tracks

Verlag: Springer International Publishing

share
TEILEN

Abstract

During a cornering manoeuvre, in a vehicle equipped with Ackerman steering geometry, the inner tire operates at a higher slip angle relative to the outer tire. As lateral load transfer occurs, the potential of the inner tires to produce the lateral force reduces and with systems like active steering, the saturation of lateral force occurs even earlier. In order to have an ideal steering geometry, at low speeds the system should follow Ackerman geometry closely and at higher speeds it should follow anti-Ackerman geometry. The tire workload (TW) distribution is a critical variable to be analyzed to prevent tire force saturation. The present paper aims to formulate the wheel angle relation for front wheel steering based on tire workload distribution. The tire workload difference (TWD) between the steered wheels is chosen as the active variable to arrive at the wheel angle relation. To study the transient behavior of the vehicle with tire workload redistribution (TWR), the Mimuro plot is used. The developed wheel angle relation utilizes the tire forces effectively and the results show improved cornering performance of the vehicle. This type of study which accounts for balancing tire workload for both lower and higher cornering speeds based on wheel angle relation has not been reported earlier in literature.
Literatur
1.
Zurück zum Zitat Ahmed, A.K.W., Rawat, V.: Vehicle steering mechanism for active independent front steering system. In: 3rd International Conference on Mechanical, Production and Automobile Engineering (ICMPAE), Indonesia, pp. 83–85 (2013) Ahmed, A.K.W., Rawat, V.: Vehicle steering mechanism for active independent front steering system. In: 3rd International Conference on Mechanical, Production and Automobile Engineering (ICMPAE), Indonesia, pp. 83–85 (2013)
2.
Zurück zum Zitat Ahmed, A.K.W., Rawat, V.: Active front independent steering system and its control for road vehicle with understeer characteristics. In: International Conference on Advances in Electrical and Mechanical Engineering (ICAEME), Thailand, pp. 146–150 (2012) Ahmed, A.K.W., Rawat, V.: Active front independent steering system and its control for road vehicle with understeer characteristics. In: International Conference on Advances in Electrical and Mechanical Engineering (ICAEME), Thailand, pp. 146–150 (2012)
3.
Zurück zum Zitat Farazandeh, A., Ahmed, A., Rakheja, S.: Performance enhancement of road vehicles using active independent front steering (AIFS). SAE Int. J. Passeng. Cars Mech. Syst. 5(4), 1273–1284 (2012) CrossRef Farazandeh, A., Ahmed, A., Rakheja, S.: Performance enhancement of road vehicles using active independent front steering (AIFS). SAE Int. J. Passeng. Cars Mech. Syst. 5(4), 1273–1284 (2012) CrossRef
4.
Zurück zum Zitat de Hoogh, J.: Implementing inflation pressure and velocity effects into Magic Formula tyre model (Thesis). Eindhoven University of Technology, Netherlands (2005) de Hoogh, J.: Implementing inflation pressure and velocity effects into Magic Formula tyre model (Thesis). Eindhoven University of Technology, Netherlands (2005)
5.
Zurück zum Zitat Guo, K., Zhuang, Y.E., Lu, D., Chen, S., Lin, W.: A study on speed-dependent tyre-road friction and its effect on the force and moment. Veh. Syst. Dyn. 43, 329–340 (2005) CrossRef Guo, K., Zhuang, Y.E., Lu, D., Chen, S., Lin, W.: A study on speed-dependent tyre-road friction and its effect on the force and moment. Veh. Syst. Dyn. 43, 329–340 (2005) CrossRef
6.
Zurück zum Zitat van der Steen, R.: Enhanced friction modeling for steady-state rolling tires (Thesis). Eindhoven University of Technology, Netherlands (2010) van der Steen, R.: Enhanced friction modeling for steady-state rolling tires (Thesis). Eindhoven University of Technology, Netherlands (2010)
7.
Zurück zum Zitat Xu, N., Guo, K., Yang, Y.: UniTire model for tire cornering properties under varying traveling velocities. SAE Technical Paper 2016-01-8037 (2016) Xu, N., Guo, K., Yang, Y.: UniTire model for tire cornering properties under varying traveling velocities. SAE Technical Paper 2016-01-8037 (2016)
8.
Zurück zum Zitat Guo, K.: UniTire: unified tire model for vehicle dynamic simulation. Veh. Syst. Dyn. 45, 79–99 (2007) CrossRef Guo, K.: UniTire: unified tire model for vehicle dynamic simulation. Veh. Syst. Dyn. 45, 79–99 (2007) CrossRef
9.
Zurück zum Zitat Mimuro, T.: Four parameter evaluation method of lateral transient response. SAE Technical Paper 901734 (1990) Mimuro, T.: Four parameter evaluation method of lateral transient response. SAE Technical Paper 901734 (1990)
Metadaten
Titel
Development of Velocity Dependent Front Wheel Angle Relation Based on Tire Workload Distribution
verfasst von
G. Arjunbarath
P. V. Manivannan
C. Sujatha
Copyright-Jahr
2020
DOI
https://doi.org/10.1007/978-3-030-38077-9_153

Stellenausschreibungen

Anzeige

Premium Partner