Skip to main content
Erschienen in: Advances in Manufacturing 4/2016

01.12.2016

Dissimilar titanium/aluminum friction stir welding lap joints by experiments and numerical simulation

verfasst von: G. Buffa, M. De Lisi, E. Sciortino, L. Fratini

Erschienen in: Advances in Manufacturing | Ausgabe 4/2016

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Dissimilar lap joints were produced by friction stir welding (FSW) out of Ti6Al4V titanium alloy and AA2024 aluminum alloy sheets. The joints, welded with varying tool rotation and feed rate, were studied by analyzing the maximum shear strength, Vickers microhardness and optical observations. A dedicated numerical model, able to take into account the presence of the two different alloys, was used to highlight the effects of the process parameters on temperature distribution, strain distribution, and material flow. The combined analysis of experimental measurements and numerical predictions allowed explaining the effects of tool rotation and feed rate on the material flow. It was found that tool rotation had a larger impact on the joint effectiveness with respect to feed rate. A competition between material mixing and heat input occurs with increasing tool rotation, resulting in higher joint strength when lower values of tool rotation are used.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Leyens C, Kocian F, Hausmann J et al (2003) Materials and design concepts for high performance compressor components. Aerosp Sci Technol 7(3):201–210CrossRef Leyens C, Kocian F, Hausmann J et al (2003) Materials and design concepts for high performance compressor components. Aerosp Sci Technol 7(3):201–210CrossRef
2.
Zurück zum Zitat Elias KL, Daehn GS, Brantley WA et al (2007) An initial study of diffusion bonds between superplastic Ti-6Al-4V for implant dentistry applications. J Prosthet Dent 97(6):357–365CrossRef Elias KL, Daehn GS, Brantley WA et al (2007) An initial study of diffusion bonds between superplastic Ti-6Al-4V for implant dentistry applications. J Prosthet Dent 97(6):357–365CrossRef
3.
Zurück zum Zitat Sujata M, Bhargava S, Sangal S (1997) On the formation of TiAl3 during reaction between solid Ti and liquid Al. J Mater Sci Lett 16(13):1175–1178CrossRef Sujata M, Bhargava S, Sangal S (1997) On the formation of TiAl3 during reaction between solid Ti and liquid Al. J Mater Sci Lett 16(13):1175–1178CrossRef
4.
Zurück zum Zitat Wang GX, Dahms M, Leitner G et al (1994) Titanium aluminides from cold-extruded elemental powders with Al-contents of 25-75 at% Al. J Mater Sci 29(7):1847–1853CrossRef Wang GX, Dahms M, Leitner G et al (1994) Titanium aluminides from cold-extruded elemental powders with Al-contents of 25-75 at% Al. J Mater Sci 29(7):1847–1853CrossRef
5.
Zurück zum Zitat Wei Y, Li J, Xiong J et al (2012) Joining aluminum to titanium alloy by friction stir lap welding with cutting pin. Mater Charact 71:1–5CrossRef Wei Y, Li J, Xiong J et al (2012) Joining aluminum to titanium alloy by friction stir lap welding with cutting pin. Mater Charact 71:1–5CrossRef
6.
Zurück zum Zitat Dressler U, Biallas G, Alfaro MU (2009) Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3. Mater Sci Eng A 526(1–2):113–117CrossRef Dressler U, Biallas G, Alfaro MU (2009) Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3. Mater Sci Eng A 526(1–2):113–117CrossRef
7.
Zurück zum Zitat Wilden J, Bergmann JP (2004) Manufacturing of titanium/aluminium and titanium/steel joints by means of diffusion welding. Weld Cut 3(5):285–290 Wilden J, Bergmann JP (2004) Manufacturing of titanium/aluminium and titanium/steel joints by means of diffusion welding. Weld Cut 3(5):285–290
8.
Zurück zum Zitat Yao W, Wu A, Zou G et al (2007) Structure and forming process of the Ti/Al diffusion bonding joints. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Met Mater Eng 36(4):700–704 Yao W, Wu A, Zou G et al (2007) Structure and forming process of the Ti/Al diffusion bonding joints. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Met Mater Eng 36(4):700–704
9.
Zurück zum Zitat Gao M, Chen C, Gu Y et al (2014) Microstructure and tensile behavior of laser arc hybrid welded dissimilar Al and Ti alloys. Materials 7(3):1590–1602CrossRef Gao M, Chen C, Gu Y et al (2014) Microstructure and tensile behavior of laser arc hybrid welded dissimilar Al and Ti alloys. Materials 7(3):1590–1602CrossRef
10.
Zurück zum Zitat Elrefaey A, Tillmann W (2009) Solid state diffusion bonding of titanium to steel using a copper base alloy as interlayer. J Mater Process Technol 209(5):2746–2752CrossRef Elrefaey A, Tillmann W (2009) Solid state diffusion bonding of titanium to steel using a copper base alloy as interlayer. J Mater Process Technol 209(5):2746–2752CrossRef
11.
Zurück zum Zitat Kim YG, Fujii H, Tsumura T et al (2006) Three defect types in friction stir welding of aluminum die casting alloy. Mater Sci Eng A 415(1–2):250–254CrossRef Kim YG, Fujii H, Tsumura T et al (2006) Three defect types in friction stir welding of aluminum die casting alloy. Mater Sci Eng A 415(1–2):250–254CrossRef
12.
Zurück zum Zitat Nandan R, DebRoy T, Bhadeshia HKDH (2008) Recent advances in friction-stir welding: process, weldment structure and properties. Prog Mater Sci 53(6):980–1023CrossRef Nandan R, DebRoy T, Bhadeshia HKDH (2008) Recent advances in friction-stir welding: process, weldment structure and properties. Prog Mater Sci 53(6):980–1023CrossRef
13.
Zurück zum Zitat Khodir SA, Shibayanagi T (2008) Friction stir welding of dissimilar AA2024 and AA7075 aluminum alloys. Mater Sci Eng B: Solid-State Mater Adv Technol 148(1–3):82–87CrossRef Khodir SA, Shibayanagi T (2008) Friction stir welding of dissimilar AA2024 and AA7075 aluminum alloys. Mater Sci Eng B: Solid-State Mater Adv Technol 148(1–3):82–87CrossRef
14.
Zurück zum Zitat Liu D, Xin R, Zheng X et al (2013) Microstructure and mechanical properties of friction stir welded dissimilar Mg alloys of ZK60-AZ31. Mater Sci Eng A 561:419–426CrossRef Liu D, Xin R, Zheng X et al (2013) Microstructure and mechanical properties of friction stir welded dissimilar Mg alloys of ZK60-AZ31. Mater Sci Eng A 561:419–426CrossRef
15.
Zurück zum Zitat Li B, Zhang Z, Shen Y et al (2014) Dissimilar friction stir welding of Ti-6Al-4V alloy and aluminum alloy employing a modified butt joint configuration: influences of process variables on the weld interfaces and tensile properties. Mater Des 53:838–848CrossRef Li B, Zhang Z, Shen Y et al (2014) Dissimilar friction stir welding of Ti-6Al-4V alloy and aluminum alloy employing a modified butt joint configuration: influences of process variables on the weld interfaces and tensile properties. Mater Des 53:838–848CrossRef
16.
Zurück zum Zitat Wu A, Song Z, Nakata K et al (2015) Interface and properties of the friction stir welded joints of titanium alloy Ti6Al4V with aluminum alloy 6061. Mater Des 71:85–92CrossRef Wu A, Song Z, Nakata K et al (2015) Interface and properties of the friction stir welded joints of titanium alloy Ti6Al4V with aluminum alloy 6061. Mater Des 71:85–92CrossRef
17.
Zurück zum Zitat Zhang Z, Shen Y, Feng X et al (2016) Dissimilar fiction stir welding of titanium alloy and aluminum alloy employing a modified butt joint configuration. Hanjie Xuebao/Trans China Weld Inst 37(5):28–32 Zhang Z, Shen Y, Feng X et al (2016) Dissimilar fiction stir welding of titanium alloy and aluminum alloy employing a modified butt joint configuration. Hanjie Xuebao/Trans China Weld Inst 37(5):28–32
18.
Zurück zum Zitat Chen YC, Nakata K (2009) Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys. Mater Des 30(3):469–474CrossRef Chen YC, Nakata K (2009) Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys. Mater Des 30(3):469–474CrossRef
19.
Zurück zum Zitat Chen YH, Ni Q, Ke LM (2012) Interface characteristic of friction stir welding lap joints of Ti/Al dissimilar alloys. Trans Nonferrous Met Soc China (Engl Ed) 22(2):299–304CrossRef Chen YH, Ni Q, Ke LM (2012) Interface characteristic of friction stir welding lap joints of Ti/Al dissimilar alloys. Trans Nonferrous Met Soc China (Engl Ed) 22(2):299–304CrossRef
20.
Zurück zum Zitat Chen ZW, Yazdanian S (2015) Microstructures in interface region and mechanical behaviours of friction stir lap Al6060 to Ti-6Al-4V welds. Mater Sci Eng A 634:37–45CrossRef Chen ZW, Yazdanian S (2015) Microstructures in interface region and mechanical behaviours of friction stir lap Al6060 to Ti-6Al-4V welds. Mater Sci Eng A 634:37–45CrossRef
21.
Zurück zum Zitat Buffa G, Hua J, Shivpuri R, et al (2006) A continuum based FEM model for friction stir welding: model development. Mat Sci Eng A: Struct 419(1–2):389–396CrossRef Buffa G, Hua J, Shivpuri R, et al (2006) A continuum based FEM model for friction stir welding: model development. Mat Sci Eng A: Struct 419(1–2):389–396CrossRef
22.
Zurück zum Zitat Gök K, Aydin M (2013) Investigations of friction stir welding process using finite element method. Int J Adv Manuf Technol 68(1–4):775–780CrossRef Gök K, Aydin M (2013) Investigations of friction stir welding process using finite element method. Int J Adv Manuf Technol 68(1–4):775–780CrossRef
23.
Zurück zum Zitat Abbasi M, Bagheri B, Keivani R (2015) Thermal analysis of friction stir welding process and investigation into affective parameters using simulation. J Mech Sci Technol 29(2):861–866CrossRef Abbasi M, Bagheri B, Keivani R (2015) Thermal analysis of friction stir welding process and investigation into affective parameters using simulation. J Mech Sci Technol 29(2):861–866CrossRef
24.
Zurück zum Zitat Buffa G (2016) Joining Ti6Al4V and AISI 304 through friction stir welding of lap joints: experimental and numerical analysis. Int J Mater Form 9(1):59–70MathSciNetCrossRef Buffa G (2016) Joining Ti6Al4V and AISI 304 through friction stir welding of lap joints: experimental and numerical analysis. Int J Mater Form 9(1):59–70MathSciNetCrossRef
25.
Zurück zum Zitat Buffa G, Fratini L, Micari F et al (2012) On the choice of tool material in friction stir welding of titanium alloys. In: Transactions of the North American Manufacturing Research Institution of SME, pp 785–794 Buffa G, Fratini L, Micari F et al (2012) On the choice of tool material in friction stir welding of titanium alloys. In: Transactions of the North American Manufacturing Research Institution of SME, pp 785–794
26.
Zurück zum Zitat Buffa G, Ducato A, Fratini L (2013) FEM based prediction of phase transformations during friction stir welding of Ti6Al4V titanium alloy. Mater Sci Eng A 581:56–65CrossRef Buffa G, Ducato A, Fratini L (2013) FEM based prediction of phase transformations during friction stir welding of Ti6Al4V titanium alloy. Mater Sci Eng A 581:56–65CrossRef
27.
Zurück zum Zitat Buffa G, Ducato A, Fratini L (2013) Dissimilar material lap joints by friction stir welding of steel and titanium sheets: process modeling. In: AIP Conference Proceedings, pp 491–498 Buffa G, Ducato A, Fratini L (2013) Dissimilar material lap joints by friction stir welding of steel and titanium sheets: process modeling. In: AIP Conference Proceedings, pp 491–498
Metadaten
Titel
Dissimilar titanium/aluminum friction stir welding lap joints by experiments and numerical simulation
verfasst von
G. Buffa
M. De Lisi
E. Sciortino
L. Fratini
Publikationsdatum
01.12.2016
Verlag
Shanghai University
Erschienen in
Advances in Manufacturing / Ausgabe 4/2016
Print ISSN: 2095-3127
Elektronische ISSN: 2195-3597
DOI
https://doi.org/10.1007/s40436-016-0157-2

Weitere Artikel der Ausgabe 4/2016

Advances in Manufacturing 4/2016 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.