Anzeige
Erschienen in:
30.11.2016 | WOOD AND OTHER RENEWABLE RESOURCES
Do green wooden composites using lignin-based binder have environmentally benign alternatives? A preliminary LCA case study in China
Erschienen in: The International Journal of Life Cycle Assessment | Ausgabe 8/2017
EinloggenAktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
Abstract
Purpose
Nowadays, formaldehyde emissions from petroleum-based adhesives contribute considerably to environmental problems and are a constraint to the development of forest-based industries. Although many efforts are being made to develop new lignin-based adhesives for panels, very few studies were carried out via life cycle assessment (LCA). This study aims to assess the life cycle of green wooden composites by using hybrid-modified ammonium lignosulfonate (HMAL) as the binder and investigate the possibility of lignin-based binder to be a good alternative.
Methods
This study is a step further of the previous work conducted on HMAL as an alternative binder for medium-density fiberboard (MDF) or, in other words, the wooden composite made from HMAL and wood fiber (WF). LCA was carried out to assess the environmental impacts during the life cycle of the new manufacturing process of HMAL/WF production using ReCiPe 1.08 Endpoint and IPCC global warming potential (GWP) method built into the GaBi version 6.0 software. The production system involved two subsystems: raw material supply and board manufacture. Meanwhile, a comparative LCA of conventional MDF, with three main damage categories and GWP, was also carried out.
Results and discussion
The hydrogen peroxide (H2O2) production, electricity, and the HMAL/WF manufacturing stages had the greatest environmental impact. The comparative results pointed out that HMAL/WF production is environmentally superior to conventional MDF in general. Due to the environmental impacts associated with the HMAL binder, a sensitivity analysis was carried out. Suggestions were made for a cleaner production, in which the H2O2 dose was reduced to 24 wt%.
Conclusions
H2O2 use, energy, and electricity consumption are main contributors to most impact categories, which help us to find the potential improvements of sustainability, choose the appropriate HMAL technology, and optimize the HMAL/WF system. Feasible production processes and life cycle costs are factors that still need to be studied.