Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 10/2016

01.08.2016

Dry Sliding Wear Properties of AZ31-Mg2Si Magnesium Matrix Composites

verfasst von: Wei Guo, De Wang, Yuan Fu, Li Zhang, Qudong Wang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2016

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

AZ31-Mg2Si in situ composites were prepared from AZ31 Mg alloy and Si particles by a gravity casting method. Several parameters, such as Si content, normal load, and environmental temperature, were varied in order to study their effects on the composite dry sliding wear properties. Tensile properties and hardness of the composites were also investigated. The obtained results showed that the wear resistance, yield strength, and hardness of the AZ31-Mg2Si composites increased with size and quantity of the Mg2Si phase. However, when the environmental temperature increased from 25 to 190 °C, the composite wear resistance and ultimate tensile strength gradually decreased due to softening of the AZ31 matrix.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat T. Tanski, K. Labisz, and J. Szewczenko, TEM Investigations of (Ti, Si)N Layer Coated on Magnesium Alloy Using PVD Technique, Solid State Phenom., 2013, 203–204, p 198–203CrossRef T. Tanski, K. Labisz, and J. Szewczenko, TEM Investigations of (Ti, Si)N Layer Coated on Magnesium Alloy Using PVD Technique, Solid State Phenom., 2013, 203–204, p 198–203CrossRef
2.
Zurück zum Zitat C. Taltavull, B. Torres, A.J. López, and J. Rams, Dry Sliding Wear Behavior of AM60B Magnesium Alloy, Wear, 2013, 301, p 615–625CrossRef C. Taltavull, B. Torres, A.J. López, and J. Rams, Dry Sliding Wear Behavior of AM60B Magnesium Alloy, Wear, 2013, 301, p 615–625CrossRef
3.
Zurück zum Zitat P. Poddar, A. Das, and K.L. Sahoo, Dry Sliding Wear Characteristics of Rheocast Mg–Sn Based Alloys, Mater. Des., 2014, 54, p 820–830CrossRef P. Poddar, A. Das, and K.L. Sahoo, Dry Sliding Wear Characteristics of Rheocast Mg–Sn Based Alloys, Mater. Des., 2014, 54, p 820–830CrossRef
4.
Zurück zum Zitat M.E. Moussa, M.A. Waly, and A.M. El-Sheikh, Combined Effect of High-Intensity Ultrasonic Treatment and Ca Addition on Modification of Primary Mg2Si and Wear Resistance in Hypereutectic Mg–Si Alloys, J. Alloys Compd., 2014, 615, p 576–581CrossRef M.E. Moussa, M.A. Waly, and A.M. El-Sheikh, Combined Effect of High-Intensity Ultrasonic Treatment and Ca Addition on Modification of Primary Mg2Si and Wear Resistance in Hypereutectic Mg–Si Alloys, J. Alloys Compd., 2014, 615, p 576–581CrossRef
5.
Zurück zum Zitat A. Srinivasan, J. Swaminathan, U.T.S. Pillai, K. Guguloth, and B.C. Pai, Effect of Combined Addition of Si and Sb on the Microstructure and Creep Properties of AZ91 Magnesium Alloy, Mater. Sci. Eng., A, 2008, 485, p 86–91CrossRef A. Srinivasan, J. Swaminathan, U.T.S. Pillai, K. Guguloth, and B.C. Pai, Effect of Combined Addition of Si and Sb on the Microstructure and Creep Properties of AZ91 Magnesium Alloy, Mater. Sci. Eng., A, 2008, 485, p 86–91CrossRef
6.
Zurück zum Zitat M.S. Dargusch, G.L. Dunlop, A.L. Bowles, K. Pettersen, and P. Bakke, The Effect of Silicon Content on the Microstructure and Creep Behavior in Die-Cast Magnesium AS Alloys, Metall. Trans. A, 2004, 35, p 1905–1909CrossRef M.S. Dargusch, G.L. Dunlop, A.L. Bowles, K. Pettersen, and P. Bakke, The Effect of Silicon Content on the Microstructure and Creep Behavior in Die-Cast Magnesium AS Alloys, Metall. Trans. A, 2004, 35, p 1905–1909CrossRef
7.
Zurück zum Zitat L.H. Liao, X.Q. Zhang, H.W. Wang, X.F. Li, and N.H. Ma, Influence of Sb on Damping Capacity and Mechanical Properties of Mg2Si/Mg–9Al Composite Materials, J. Alloys Compd., 2007, 430, p 292–296CrossRef L.H. Liao, X.Q. Zhang, H.W. Wang, X.F. Li, and N.H. Ma, Influence of Sb on Damping Capacity and Mechanical Properties of Mg2Si/Mg–9Al Composite Materials, J. Alloys Compd., 2007, 430, p 292–296CrossRef
8.
Zurück zum Zitat Y.Z. Lu, Q.D. Wang, X.Q. Zeng, Y.P. Zhu, and W.J. Ding, Effects of Rare Earths on the Microstructure, Properties and Fracture Behavior of Mg–Al Alloys, Mater. Sci. Eng., A, 2001, 301, p 255–258CrossRef Y.Z. Lu, Q.D. Wang, X.Q. Zeng, Y.P. Zhu, and W.J. Ding, Effects of Rare Earths on the Microstructure, Properties and Fracture Behavior of Mg–Al Alloys, Mater. Sci. Eng., A, 2001, 301, p 255–258CrossRef
9.
Zurück zum Zitat W.M. Gan, K. Wu, M.Y. Zheng, X.J. Wang, H. Chang, and H.-G. Brokmeier, Microstructure and Mechanical Property of the ECAPed Mg2Si/Mg Composite, Mater. Sci. Eng., A, 2009, 516, p 283–289CrossRef W.M. Gan, K. Wu, M.Y. Zheng, X.J. Wang, H. Chang, and H.-G. Brokmeier, Microstructure and Mechanical Property of the ECAPed Mg2Si/Mg Composite, Mater. Sci. Eng., A, 2009, 516, p 283–289CrossRef
10.
Zurück zum Zitat W. Guo, Q.D. Wang, B. Ye, H. Zhou, and J.F. Liu, Microstructure and Mechanical Properties of AZ31-Mg2Si In Situ Composite Fabricated by Repetitive Upsetting, Trans. Nonferr. Met. Soc. China, 2014, 24, p 3755–3761CrossRef W. Guo, Q.D. Wang, B. Ye, H. Zhou, and J.F. Liu, Microstructure and Mechanical Properties of AZ31-Mg2Si In Situ Composite Fabricated by Repetitive Upsetting, Trans. Nonferr. Met. Soc. China, 2014, 24, p 3755–3761CrossRef
11.
Zurück zum Zitat ASTM G133-02, Standard TST method for linearly reciprocating ball-on-flat sliding wear, West Conshohocken, PA: ASTM. ASTM G133-02, Standard TST method for linearly reciprocating ball-on-flat sliding wear, West Conshohocken, PA: ASTM.
12.
Zurück zum Zitat Q.C. Jiang, H.Y. Wang, Y. Wang, B.X. Ma, and J.G. Wang, Modification of Mg2Si in Mg–Si Alloys with Yttrium, Mater. Sci. Eng., A, 2005, 392, p p130–p135CrossRef Q.C. Jiang, H.Y. Wang, Y. Wang, B.X. Ma, and J.G. Wang, Modification of Mg2Si in Mg–Si Alloys with Yttrium, Mater. Sci. Eng., A, 2005, 392, p p130–p135CrossRef
13.
Zurück zum Zitat Y. Carbonneau, A. Couture, A. Van Neste, and R. Tremblay, On the Observation of a New Ternary MgSiCa Phase in Mg–Si Alloys, Metall. Trans. A, 1998, 29, p 1759–1763CrossRef Y. Carbonneau, A. Couture, A. Van Neste, and R. Tremblay, On the Observation of a New Ternary MgSiCa Phase in Mg–Si Alloys, Metall. Trans. A, 1998, 29, p 1759–1763CrossRef
14.
Zurück zum Zitat J.F. Archard, Contact and Rubbing of Flat Surfaces, J. Appl. Phys., 1953, 24, p 981–988CrossRef J.F. Archard, Contact and Rubbing of Flat Surfaces, J. Appl. Phys., 1953, 24, p 981–988CrossRef
15.
Zurück zum Zitat S.C. Sharma, B. Anand, and M. Krishna, Evaluation of Sliding Wear Behavior of Feldspar Particle-Reinforced Magnesium Alloy Composites, Wear, 2000, 241, p 33–40CrossRef S.C. Sharma, B. Anand, and M. Krishna, Evaluation of Sliding Wear Behavior of Feldspar Particle-Reinforced Magnesium Alloy Composites, Wear, 2000, 241, p 33–40CrossRef
16.
Zurück zum Zitat L.H. Qi, J.T. Guan, J. Liu, J.M. Zhou, and X.L. Wei, Wear Behaviors of Cf/Mg Composites Fabricated by Extrusion Directly Following Vacuum Pressure Infiltration Technique, Wear, 2013, 307, p 127–133CrossRef L.H. Qi, J.T. Guan, J. Liu, J.M. Zhou, and X.L. Wei, Wear Behaviors of Cf/Mg Composites Fabricated by Extrusion Directly Following Vacuum Pressure Infiltration Technique, Wear, 2013, 307, p 127–133CrossRef
17.
Zurück zum Zitat B.V.M. Kumar and B. Basu, Evolution in Friction and Wear of Mg–SiCp Composites: Influence of Fretting Duration, J. Mater. Res., 2005, 20, p 801–812CrossRef B.V.M. Kumar and B. Basu, Evolution in Friction and Wear of Mg–SiCp Composites: Influence of Fretting Duration, J. Mater. Res., 2005, 20, p 801–812CrossRef
18.
Zurück zum Zitat P. Abachi, A. Masoudi, and K. Purazrang, Dry Sliding Wear Behavior of SiCp/QE22 Magnesium Alloy Matrix Composites, Mater. Sci. Eng., A, 2006, 435–436, p 653–657CrossRef P. Abachi, A. Masoudi, and K. Purazrang, Dry Sliding Wear Behavior of SiCp/QE22 Magnesium Alloy Matrix Composites, Mater. Sci. Eng., A, 2006, 435–436, p 653–657CrossRef
19.
Zurück zum Zitat M.A. Martinez, A. Martin, and J. Llorca, Wear of Al–Si Alloys and Al–Si/SiC Composites at Ambient and Elevated Temperatures, Scr. Metall. Mater., 1993, 28, p 207–212CrossRef M.A. Martinez, A. Martin, and J. Llorca, Wear of Al–Si Alloys and Al–Si/SiC Composites at Ambient and Elevated Temperatures, Scr. Metall. Mater., 1993, 28, p 207–212CrossRef
Metadaten
Titel
Dry Sliding Wear Properties of AZ31-Mg2Si Magnesium Matrix Composites
verfasst von
Wei Guo
De Wang
Yuan Fu
Li Zhang
Qudong Wang
Publikationsdatum
01.08.2016
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 10/2016
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-016-2263-5

Weitere Artikel der Ausgabe 10/2016

Journal of Materials Engineering and Performance 10/2016 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.