Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2021 | OriginalPaper | Buchkapitel

Dynamic Response Analysis of Rotating Shaft-Bearing System with an Open Crack

verfasst von: S. Bala Murugan, R. K. Behera, P. K. Parida

Erschienen in: Proceedings of the 6th National Symposium on Rotor Dynamics

Verlag: Springer Singapore

share
TEILEN

Abstract

The best of effective design and practices of constructive methods in the analysis of rotor excessive vibration will yield the solutions for the dynamic problems. The extensive effusion of the finite element method (FEM) strongly induced in the area of rotordynamic studies and can give accurate results. Diagnosis of a rotor shaft with crack for its operating conditions is essential to the dynamic systems design. This paper carries the analysis of a finite element model of a flexible rotor-bearing system with a transverse open crack by accounting the various crack depths and internal damping of the shaft. The effect of transverse crack on the system instability regions was found out. It is noted that the natural whirl speeds reduce with increase in crack depths. The system unbalance response and damped natural whirl speeds are presented with undamped orthotropic bearings. The stability of the rotating shaft-bearing system with transverse open crack has also been studied for the various spin speeds and disk eccentricity with the time integration procedure. The phase-plane portraits and frequency-domain diagrams are drawn to study the dynamic behavior. Further, the study is yet to be extended to a fully levitated rotor model supported in active magnetic bearings (AMBs).

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literatur
1.
Zurück zum Zitat Hong SW, Park JH (1999) Dynamic analysis of multi-stepped, distributed parameter rotor-bearing systems. J Sound Vib 227(4):769–785 CrossRef Hong SW, Park JH (1999) Dynamic analysis of multi-stepped, distributed parameter rotor-bearing systems. J Sound Vib 227(4):769–785 CrossRef
2.
Zurück zum Zitat Joshi BB, Dange YK (1976) Critical speeds of a flexible rotor with combined distributed parameter and lumped mass technique. J Sound Vib 45(3):441–459 CrossRef Joshi BB, Dange YK (1976) Critical speeds of a flexible rotor with combined distributed parameter and lumped mass technique. J Sound Vib 45(3):441–459 CrossRef
3.
Zurück zum Zitat Lee CW, Jei YG (1988) Modal analysis of continuous rotor-bearing systems. J Sound Vib 126(2):345–361 CrossRef Lee CW, Jei YG (1988) Modal analysis of continuous rotor-bearing systems. J Sound Vib 126(2):345–361 CrossRef
4.
Zurück zum Zitat Rao BS, Sekhar AS, Majumdar BC (1996) Analysis of rotors considering distributed Bearing stiffness and damping. Comput Struct 61:951–955 CrossRef Rao BS, Sekhar AS, Majumdar BC (1996) Analysis of rotors considering distributed Bearing stiffness and damping. Comput Struct 61:951–955 CrossRef
5.
Zurück zum Zitat Sekhar AS, Dey JK (2000) Effects of cracks on rotor system instability. Mech Mach Theory 35:1657–1674 CrossRef Sekhar AS, Dey JK (2000) Effects of cracks on rotor system instability. Mech Mach Theory 35:1657–1674 CrossRef
7.
Zurück zum Zitat Nelson HD, McVaugh JM (1976) The dynamics of rotor-bearing systems using finite elements. J Eng Ind, 593–600 Nelson HD, McVaugh JM (1976) The dynamics of rotor-bearing systems using finite elements. J Eng Ind, 593–600
9.
Zurück zum Zitat Dimarogonas AD (1996) Vibration of cracked structures: a state of the art review. Eng Fract Mech 55:831–857 CrossRef Dimarogonas AD (1996) Vibration of cracked structures: a state of the art review. Eng Fract Mech 55:831–857 CrossRef
10.
Zurück zum Zitat Sekhar AS, Prabhu BS (1994) Transient analysis of a cracked rotor passing through critical speed. J Sound Vib 173(3):415–421 CrossRef Sekhar AS, Prabhu BS (1994) Transient analysis of a cracked rotor passing through critical speed. J Sound Vib 173(3):415–421 CrossRef
11.
Zurück zum Zitat Rao JS (2009) Rotor dynamics. New Age International (P) Limited, New Delhi Rao JS (2009) Rotor dynamics. New Age International (P) Limited, New Delhi
12.
Metadaten
Titel
Dynamic Response Analysis of Rotating Shaft-Bearing System with an Open Crack
verfasst von
S. Bala Murugan
R. K. Behera
P. K. Parida
Copyright-Jahr
2021
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-15-5701-9_42

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.