Skip to main content
Erschienen in: Metallurgical and Materials Transactions A 3/2018

24.12.2017

Early Stages of Microstructure and Texture Evolution during Beta Annealing of Ti-6Al-4V

verfasst von: A. L. Pilchak, G. A. Sargent, S. L. Semiatin

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 3/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The early stages of microstructure evolution during annealing of Ti-6Al-4V in the beta phase field were established. For this purpose, a series of short-time heat treatments was performed using sheet samples that had a noticeable degree of alpha-phase microtexture in the as-received condition. Reconstruction of the beta-grain structure from electron-backscatter-diffraction measurements of the room-temperature alpha-phase texture revealed that microstructure evolution at short times was controlled not by general grain growth, but rather by nucleation-and-growth events analogous to discontinuous recrystallization. The nuclei comprised a small subset of beta grains that were highly misoriented relative to those comprising the principal texture component of the beta matrix. From a quantitative standpoint, the transformation kinetics were characterized by an Avrami exponent of approximately unity, thus suggestive of metadynamic recrystallization. The recrystallization process led to the weakening and eventual elimination of the initial beta texture through the growth of a population of highly misoriented grains.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Fußnoten
1
Assuming a diffusivity D of ~ 0.1 μm2/s[28] and an alpha-particle radius r of 2.5 μm, the dissolution/homogenization time would be of the order of r2/2D ~ 30 seconds.
 
Literatur
1.
Zurück zum Zitat S.L. Semiatin, J.C. Soper, and I.M. Sukonnik: Acta Metall. Mater., 1996, vol. 44, pp. 1979-1986.CrossRef S.L. Semiatin, J.C. Soper, and I.M. Sukonnik: Acta Metall. Mater., 1996, vol. 44, pp. 1979-1986.CrossRef
2.
Zurück zum Zitat S.P. Fox: in Titanium ’92: Science and Technology, F.H. Froes and I.L. Caplan, eds., TMS, Warrendale, PA, 1992, pp. 769–76. S.P. Fox: in Titanium ’92: Science and Technology, F.H. Froes and I.L. Caplan, eds., TMS, Warrendale, PA, 1992, pp. 769–76.
3.
Zurück zum Zitat S.L. Semiatin, P.N. Fagin, M.G. Glavicic, I.M. Sukonnik, and O.M. Ivasishin: Mat. Sci. Eng. A, 2001, vol. A299, pp. 225-234.CrossRef S.L. Semiatin, P.N. Fagin, M.G. Glavicic, I.M. Sukonnik, and O.M. Ivasishin: Mat. Sci. Eng. A, 2001, vol. A299, pp. 225-234.CrossRef
4.
Zurück zum Zitat O.M. Ivasishin, S.V. Shevchenko, and S.L. Semiatin: Mat. Sci. Eng. A, 2002, vol. A332, pp. 343-350.CrossRef O.M. Ivasishin, S.V. Shevchenko, and S.L. Semiatin: Mat. Sci. Eng. A, 2002, vol. A332, pp. 343-350.CrossRef
5.
Zurück zum Zitat O.M. Ivasishin, S.L. Semiatin, P.E. Markovsky, S.V. Shevchenko, and S.V. Ulshin: Mat. Sci. Eng. A, 2002, vol. A337, pp. 88-96.CrossRef O.M. Ivasishin, S.L. Semiatin, P.E. Markovsky, S.V. Shevchenko, and S.V. Ulshin: Mat. Sci. Eng. A, 2002, vol. A337, pp. 88-96.CrossRef
6.
Zurück zum Zitat O.M. Ivasishin, S.V. Shevchenko, P.E. Markovsky, and S.L. Semiatin: in Ti-2003: Science and Technology, G. Lütjering, and J. Albrecht, eds., Wiley, Weinheim, 2004, pp. 1307–14. O.M. Ivasishin, S.V. Shevchenko, P.E. Markovsky, and S.L. Semiatin: in Ti-2003: Science and Technology, G. Lütjering, and J. Albrecht, eds., Wiley, Weinheim, 2004, pp. 1307–14.
7.
Zurück zum Zitat G. Abbruzzese and K. Lücke: Acta. Metall., 1986, vol. 34, pp. 905-914.CrossRef G. Abbruzzese and K. Lücke: Acta. Metall., 1986, vol. 34, pp. 905-914.CrossRef
8.
Zurück zum Zitat H. Eichelkraut, G. Abbruzzese, and K. Lücke: Acta Metall., 1988, vol. 36, pp. 55-68.CrossRef H. Eichelkraut, G. Abbruzzese, and K. Lücke: Acta Metall., 1988, vol. 36, pp. 55-68.CrossRef
9.
Zurück zum Zitat O.M. Ivasishin, S.V. Shevchenko, N.L. Vasiliev, and S.L. Semiatin: Acta Mater., 2003, vol. 51, pp. 1019-1034.CrossRef O.M. Ivasishin, S.V. Shevchenko, N.L. Vasiliev, and S.L. Semiatin: Acta Mater., 2003, vol. 51, pp. 1019-1034.CrossRef
10.
Zurück zum Zitat N. Ma and Y. Wang: in Numiform 2004, S. Ghosh, J.M. Castro, and J.K. Lee, eds., American Institute of Physics, College Park, MD, 2004, pp. 1700–04. N. Ma and Y. Wang: in Numiform 2004, S. Ghosh, J.M. Castro, and J.K. Lee, eds., American Institute of Physics, College Park, MD, 2004, pp. 1700–04.
11.
Zurück zum Zitat N. Ma, A. Kazaryan, S.A. Dregia, and Y. Wang: Acta Mater., 2004, vol. 52, pp. 3869-3879.CrossRef N. Ma, A. Kazaryan, S.A. Dregia, and Y. Wang: Acta Mater., 2004, vol. 52, pp. 3869-3879.CrossRef
12.
Zurück zum Zitat H. Moustahfid, N. Gey, M. Humbert, and M.J. Philippe: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 51-61.CrossRef H. Moustahfid, N. Gey, M. Humbert, and M.J. Philippe: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 51-61.CrossRef
13.
Zurück zum Zitat S.V. Divinski, V.N. Dnieprenko, and O.M. Ivasishin: Mat. Sci. Eng. A, 1998, vol. A243, pp. 201-205.CrossRef S.V. Divinski, V.N. Dnieprenko, and O.M. Ivasishin: Mat. Sci. Eng. A, 1998, vol. A243, pp. 201-205.CrossRef
14.
Zurück zum Zitat D. Bhattacharyya, G.B. Viswanathan, S.C. Vogel, D.J. Williams, V. Venkatesh, and H.L. Fraser: Acta Mater., 2006, vol. 54, pp. 231-236. D. Bhattacharyya, G.B. Viswanathan, S.C. Vogel, D.J. Williams, V. Venkatesh, and H.L. Fraser: Acta Mater., 2006, vol. 54, pp. 231-236.
15.
Zurück zum Zitat G.C. Obasi, R.J. Moat, D.G.L. Prakash, W. Kockelmann, J. Quinta da Fonseca, and M. Preuss: Acta Mater., 2012, vol. 60, pp. 7169-7182.CrossRef G.C. Obasi, R.J. Moat, D.G.L. Prakash, W. Kockelmann, J. Quinta da Fonseca, and M. Preuss: Acta Mater., 2012, vol. 60, pp. 7169-7182.CrossRef
16.
Zurück zum Zitat A.P. Woodfield, M.D. Gorman, R.R. Corderman, J.A. Sutliff, and B. Yamrom: in Titanium ’95: Science and Technology, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., Institute of Materials, London, 1995, pp. 1116-1123. A.P. Woodfield, M.D. Gorman, R.R. Corderman, J.A. Sutliff, and B. Yamrom: in Titanium ’95: Science and Technology, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., Institute of Materials, London, 1995, pp. 1116-1123.
17.
Zurück zum Zitat T.R. Bieler and S.L. Semiatin: International Journal of Plasticity, 2002, vol. 18, pp. 1165-1189.CrossRef T.R. Bieler and S.L. Semiatin: International Journal of Plasticity, 2002, vol. 18, pp. 1165-1189.CrossRef
18.
Zurück zum Zitat N. Gey, P. Bocher P, E. Uta, L. Germain, and M. Humbert: Acta Mater., 2012, vol. 60, pp. 2647–2655.CrossRef N. Gey, P. Bocher P, E. Uta, L. Germain, and M. Humbert: Acta Mater., 2012, vol. 60, pp. 2647–2655.CrossRef
19.
Zurück zum Zitat S.L. Semiatin, K.T. Kinsel, A.L. Pilchak, and G.A. Sargent: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3852-3865.CrossRef S.L. Semiatin, K.T. Kinsel, A.L. Pilchak, and G.A. Sargent: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3852-3865.CrossRef
20.
Zurück zum Zitat A.R. Shiveley, P.A. Shade, A.L. Pilchak, J.S. Tiley, and R. Kerns: J. Microscopy, 2011, vol. 244, pp. 181-186.CrossRef A.R. Shiveley, P.A. Shade, A.L. Pilchak, J.S. Tiley, and R. Kerns: J. Microscopy, 2011, vol. 244, pp. 181-186.CrossRef
21.
Zurück zum Zitat A.L. Pilchak, A.R. Shively, J.S. Tiley, and D.L. Ballard: J Microscopy, 2011, vol. 244, pp. 38–44.CrossRef A.L. Pilchak, A.R. Shively, J.S. Tiley, and D.L. Ballard: J Microscopy, 2011, vol. 244, pp. 38–44.CrossRef
22.
Zurück zum Zitat M. Humbert, H. Moustahfid, F. Wagner, and M.J. Philippe: Mater. Sci. Forum, 1994, vol. A157, pp. 1225-1230.CrossRef M. Humbert, H. Moustahfid, F. Wagner, and M.J. Philippe: Mater. Sci. Forum, 1994, vol. A157, pp. 1225-1230.CrossRef
23.
Zurück zum Zitat M. Humbert, F. Wagner, H. Moustahfid, and C. Esling: J. Appl. Cryst., 1995, vol. 28, pp. 571-576.CrossRef M. Humbert, F. Wagner, H. Moustahfid, and C. Esling: J. Appl. Cryst., 1995, vol. 28, pp. 571-576.CrossRef
24.
Zurück zum Zitat M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A346, pp. 50-59.CrossRef M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A346, pp. 50-59.CrossRef
25.
Zurück zum Zitat M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A351, pp. 258-264.CrossRef M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A351, pp. 258-264.CrossRef
26.
Zurück zum Zitat A.L. Pilchak and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 773-794.CrossRef A.L. Pilchak and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 773-794.CrossRef
28.
Zurück zum Zitat S.L. Semiatin, S.L. Knisley, P.N. Fagin, F. Zhang, and D.R. Barker: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2377-2386.CrossRef S.L. Semiatin, S.L. Knisley, P.N. Fagin, F. Zhang, and D.R. Barker: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2377-2386.CrossRef
29.
Zurück zum Zitat C.M. Sellars: in Thermec 88. vol. 2, I. Tamura, ed., Iron Steel Institute of Japan, Tokyo, 1988, pp. 448–57. C.M. Sellars: in Thermec 88. vol. 2, I. Tamura, ed., Iron Steel Institute of Japan, Tokyo, 1988, pp. 448–57.
30.
Zurück zum Zitat J.J. Jonas: in Proc. 4th Int. Conf. Strength Metals Alloys., Laboratoire de Phsysique du Solide, E.N.S.M.I.M., I.N.P.L., Nancy, France, 1976, pp. 976–1002. J.J. Jonas: in Proc. 4th Int. Conf. Strength Metals Alloys., Laboratoire de Phsysique du Solide, E.N.S.M.I.M., I.N.P.L., Nancy, France, 1976, pp. 976–1002.
31.
Zurück zum Zitat G. Shen, S.L. Semiatin, and R. Shivpuri: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1795-1803.CrossRef G. Shen, S.L. Semiatin, and R. Shivpuri: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1795-1803.CrossRef
33.
Zurück zum Zitat J.E. Burke and D. Turnbull: Progress in Metal Physics, 1952, vol. 3, pp. 220-292.CrossRef J.E. Burke and D. Turnbull: Progress in Metal Physics, 1952, vol. 3, pp. 220-292.CrossRef
35.
37.
Zurück zum Zitat A.D. Rollett and E.A. Holm: in Proc. ReX’96 3rd Int. Conf. Recryst. Relat. Phenom. T.R. McNelley, ed., Monterey Institute of Advanced Studies, Monterey, 1997, pp. 31. A.D. Rollett and E.A. Holm: in Proc. ReX’96 3rd Int. Conf. Recryst. Relat. Phenom. T.R. McNelley, ed., Monterey Institute of Advanced Studies, Monterey, 1997, pp. 31.
38.
Zurück zum Zitat R.A. Lebensohn and C.N. Tome: Acta metal. mater., 1993, vol. 41; 9, pp. 2611-2624.CrossRef R.A. Lebensohn and C.N. Tome: Acta metal. mater., 1993, vol. 41; 9, pp. 2611-2624.CrossRef
Metadaten
Titel
Early Stages of Microstructure and Texture Evolution during Beta Annealing of Ti-6Al-4V
verfasst von
A. L. Pilchak
G. A. Sargent
S. L. Semiatin
Publikationsdatum
24.12.2017
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions A / Ausgabe 3/2018
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-017-4444-8

Weitere Artikel der Ausgabe 3/2018

Metallurgical and Materials Transactions A 3/2018 Zur Ausgabe

Topical Collection: Next Generation Superalloys and Beyond

Gamma Prime Precipitate Evolution During Aging of a Model Nickel-Based Superalloy

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.