nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.12.2012

Effect of Annealing and Cold Work on Mechanical Properties of Beta III Titanium

verfasst von: S. Cai, D. M. Bailey, L. E. Kay

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Experiments have been carried out to study the effect of annealing and cold work (CW) on the mechanical properties of beta III Ti alloy. Material was annealed at different temperatures above the beta transformation temperature, and then cold drawn to about 53% area reduction. Cyclic tensile test was performed to study the evolution of mechanical properties and the recoverable strain during process. Results show that the effect of annealing and CW is closely related to the stress-induced martensite (SIM) phase transformation. Lower annealing temperature results in higher strength and recoverable strain, which is further increased by CW. A total recoverable strain of ~3.2% was obtained from the annealed and CW sample.

Vorheriger Artikel Superelastic Porous NiTi with Adjustable Porosities Synthesized by Powder Metallurgical Method

Nächster Artikel Effect of Aging Treatment on Superelasticity of a Ti48.8Ni50.8V0.4 Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

R.P. Kusy, A Review of Contemporary Archwires: Their Properties and Characteristics, Angle Orthod., 1997, 67(3), p 197–208

S. Nuss, Titanium Molybdenum Alloy Guidewire, US Patent No. 7,468,045, 2008

S. Hanada, M. Ozeki, and O. Izumi, Deformation Characteristics in Beta Phase Ti-Nb Alloys, Metall. Trans., 1985, 16A, p 789–795

S. Hanada, T. Yoshio, and O. Izumi, Effect of Plastic Deformation Modes on Tensile Properties of Beta Titanium Alloys, Trans. Jpn. Inst. Met., 1986, 27(7), p 496–503

E. Takahashi, T. Sakurai, S. Watanabe, N. Masahashi, and S. Hanada, Effect of Heat Treatment and Sn Content on Superelasticity in Biocompatible TiNbSn Alloys, Mater. Trans., 2002, 43(12), p 2978–2983CrossRef

S. Miyazaki, H.Y. Kim, and H. Hosoda, Development and Characterization of Ni-Free Ti-Base Shape Memory and Superelastic Alloys, Mater. Sci. Eng. A, 2006, 438–440, p 18–24

P. Laheurte, A. Eberhardt, and M.J. Philippe, Influence of the Microstructure on the Pseudoelasticity of a Metastable Beta Titanium Alloy, Mater. Sci. Eng. A, 2005, 396(1–2), p 223–230

P. Laheurte, A. Eberhardt, M.J. Philippe, and L. Deblock, Improvement of Pseudoelasticity and Ductility of Beta III, Titanium Alloy—Application to Orthodontic Wires, Eur. J. Orthod., 2007, 29, p 8–13CrossRef

W.F. Ho, C.P. Ju, and J.H. Chern Lin, Structure and Properties of Cast Binary Ti-Mo Alloys, Biomaterials, 1999, 20, p 2115–2122CrossRef

10.

D. Kent, G. Wang, Z. Yu, and M.S. Dargusch, Pseudoelastic Behaviour of a Beta Ti-25Nb-3Zr-3Mo-2Sn Alloy, Mater. Sci. Eng. A, 2010, 527, p 2246–2252CrossRef

11.

Y.L. Hao, S.J. Li, S.Y. Sun, C.Y. Zheng, and R. Yang, Elastic Deformation Behaviour of Ti-24Nb-4Zr-7.9Sn for Biomedical Applications, Acta Biomater., 2007, 3(2), p 277–286CrossRef

12.

A.J. Goldberg, R. Vanderby, Jr., and C.J. Burstone, Reduction in the Modulus of Elasticity in Orthodontic Wires, J. Dent. Res., 1977, 56(10), p 1227–1231CrossRef

13.

T.W. Duerig, Some Unsolved Aspects of Nitinol, Mater. Sci. Eng. A, 2006, 438–440, p 69–74

14.

C.V. Shastry and A.J. Goldberg, The Influence of Drawing Parameters on the Mechanical Properties of Two Beta-Titanium Alloys, J. Dent. Res., 1983, 62, p 1092–1097CrossRef

15.

Y.L. Hao, M. Niinomi, D. Kuroda, K. Fukunaga, Y.L. Zhou, R. Yang, and A. Suzuki, Young’s Modulus and Mechanical Properties of Ti-29Nb-13Ta-4.6Zr in Relation to α″ Martensite, Metall. Mater. Trans, 2002, 33A, p 3137–3144CrossRef

16.

M.J. Blackburn and J.A. Feeney, Stress-Induced Transformations in Ti-Mo Alloys, J. Inst. Metals, 1971, 99(2), p 132–134

17.

J.A. Roberson, S. Fujishiro, V.S. Arunachalam, and C.M. Sargent, Stress Induced Transformations in Beta III, Ti Alloy Single Crystals, Metall. Trans., 1974, 5, p 2317–2322CrossRef

18.

J.A. Roberson and A.M. Adair, Effects of Combined High and Low Temperature Deformation Processing of Beta III, Titanium, Metall. Trans., 1972, 3, p 1967–1972CrossRef

19.

H.Y. Kim, Y. Ikehara, J.I. Kim, H. Hosoda, and S. Miyazaki, Martensitic Transformation, Shape Memory Effect and Superelasticity of Ti-Nb Binary Alloys, Acta Mater., 2006, 54, p 2419–2429CrossRef

20.

H.Y. Kim, T. Sasaki, K. Okutsu, J.I. Kim, T. Inamura, H. Hosoda, and S. Miyazaki, Texture and Shape Memory Behavior of Ti-22Nb-6Ta Alloy, Acta Mater., 2006, 54, p 423–433CrossRef

21.

U.F. Kocks, C.N. Tomé, and H.R. Wenk, Texture and Anisotropy, Cambridge University Press, Cambridge, 2000

22.

A. Bhattacharjee, S. Bhargava, V.K. Varma, S.V. Kamat, and A.K. Gogia, Effect of β Grain Size on Stress Induced Martensitic Transformation in β Solution Treated Ti-10V-2Fe-3Al Alloy, Scripta Mater., 2005, 53, p 195–200CrossRef

23.

T. Grosdidier, Y. Combres, E. Gautier, and M.J. Philippe, Effect of Microstructure Variations on the Formation of Deformation-Induced Martensite and Associated Tensile Properties in a β Metastable Ti Alloy, Metall. Mater Trans., 2000, 31A, p 1095–1106CrossRef

24.

E. Takashi, S. Watanabe, and S. Hanada, Superelastic Behavior in Nickel-Free Ti-Nb-Sn Alloys, SMST-2003, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, A.R. Pelton and T. Duerig, Ed., SMST Society, Menlo Park, CA, 2003, p 91–99

25.

S. Kajiwara, Roles of Dislocations and Grain Boundaries in Martensite Nucleation, Metall. Trans., 1986, 17A, p 1693–1702

26.

L.C. Zhang, T. Zhou, M. Aindow, S.P. Alpay, and M.J. Blackburn, Nucleation of Stress-Induced Martensites in a Ti/Mo-Based Alloy, J. Mater. Sci., 2005, 40, p 2833–2836CrossRef

Titel: Effect of Annealing and Cold Work on Mechanical Properties of Beta III Titanium
verfasst von: S. Cai
D. M. Bailey
L. E. Kay
Publikationsdatum: 01.12.2012
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2012
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-012-0302-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2012

Irradiation-Assisted Stress-Corrosion Cracking of Nitinol During eBeam Sterilization

Effects of ECAP and Aging on Mechanical and Superelastic Behaviors of Ti-Mo-Based and Ti-25at.%Nb SMAs

Characterization of Inclusions in VIM/VAR NiTi Alloys

Phase Transformation Behavior of Hot Isostatically Pressed NiTi-X (X = Ag, Nb, W) Alloys for Functional Engineering Applications

The Measurement of Total Inclusion Content in Nickel-Titanium Alloys

Reproducibility Study of NiTi Parts Made by Metal Injection Molding

Premium Partner

Marktübersichten