Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 10/2016

08.08.2016

Effect of Annealing on Mechanical Properties and Formability of Cold Rolled Thin Sheets of Fe-P P/M Alloys

verfasst von: Shefali Trivedi, D. Ravi Kumar, S. Aravindan

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2016

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Phosphorus in steel is known to increase strength and hardness and decrease ductility. Higher phosphorus content (more than 0.05%), however, promotes brittle behavior due to segregation of Fe3P along the grain boundaries which makes further mechanical working of these alloys difficult. In this work, thin sheets of Fe-P alloys (with phosphorus in range of 0.1–0.35%) have been developed through processing by powder metallurgy followed by hot rolling and cold rolling. The effect of phosphorus content and annealing parameters (temperature and time) on microstructure, mechanical properties, formability in biaxial stretching and fracture behavior of the cold rolled and annealed sheets has been studied. A comparison has also been made between the properties of the sheets made through P/M route and the conventional cast route with similar phosphorus content. It has been shown that thin sheets of Fe-P alloys with phosphorous up to 0.35% possessing a good combination of strength and formability can be produced through rolling of billets of these alloys made through powder metallurgy technique without the problem of segregation.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat G. Sahoo and R. Balasubramaniam, Mechanical Behavior of Novel Phosphoric Irons for Concrete Reinforcement Applications, Scripta Materialia, 2007, 56, p 117–120CrossRef G. Sahoo and R. Balasubramaniam, Mechanical Behavior of Novel Phosphoric Irons for Concrete Reinforcement Applications, Scripta Materialia, 2007, 56, p 117–120CrossRef
2.
Zurück zum Zitat C.J. McMahon, Brittle Fracture of Grain Boundaries, Interface Sci., 2004, 12(2–3), p 141–146CrossRef C.J. McMahon, Brittle Fracture of Grain Boundaries, Interface Sci., 2004, 12(2–3), p 141–146CrossRef
3.
Zurück zum Zitat M. Vsianska, The Effect of Segregated Sp-Impurities on Grain-Boundary and Surface Structure, Magnetism and Embrittlement in Nickel, Prog. Mater. Sci., 2011, 56, p 817–840CrossRef M. Vsianska, The Effect of Segregated Sp-Impurities on Grain-Boundary and Surface Structure, Magnetism and Embrittlement in Nickel, Prog. Mater. Sci., 2011, 56, p 817–840CrossRef
4.
Zurück zum Zitat H.K.D.H. Bhadeshia, Steels for Bearings, Prog. Mater. Scie., 2012, 57, p 268–435CrossRef H.K.D.H. Bhadeshia, Steels for Bearings, Prog. Mater. Scie., 2012, 57, p 268–435CrossRef
5.
Zurück zum Zitat M.H. Tikkanen, The Application of Sintering Theory in Practice, Physics of Sintering- Theory and Practice, M.M. Risti, Ed., 1973, p 441–453 M.H. Tikkanen, The Application of Sintering Theory in Practice, Physics of Sintering- Theory and Practice, M.M. Risti, Ed., 1973, p 441–453
6.
Zurück zum Zitat S.V. Muchnik, Phosphorus-Containing Alloys, Encycl. Inorg. Mater., 1977, 2, p 666–667 S.V. Muchnik, Phosphorus-Containing Alloys, Encycl. Inorg. Mater., 1977, 2, p 666–667
7.
Zurück zum Zitat J. Das, K. Chandra, P.S. Mishra, and B. Sharma, Hardness and Tensile Properties of Fe-P Based Alloys Made Through Powder Forging Technique, Mater. Sci. Eng. A, 2008, 479, p 164–170CrossRef J. Das, K. Chandra, P.S. Mishra, and B. Sharma, Hardness and Tensile Properties of Fe-P Based Alloys Made Through Powder Forging Technique, Mater. Sci. Eng. A, 2008, 479, p 164–170CrossRef
8.
Zurück zum Zitat S. Trivedi, D. Ravi Kumar, and S. Aravindan, Development of Thin Sheets From Fe-P Alloys Through P/M Technique, Procedia Mate. Sci., 2014, 6, p 129–134CrossRef S. Trivedi, D. Ravi Kumar, and S. Aravindan, Development of Thin Sheets From Fe-P Alloys Through P/M Technique, Procedia Mate. Sci., 2014, 6, p 129–134CrossRef
9.
Zurück zum Zitat H. Hu, Effect of Mn on Annealing Texture, Plastic Anisotropy and Mechanical Properties of Low Carbon Steels Containing 0.067% P, Mater. Trans. A, 1977, 8A, p 1567–1575CrossRef H. Hu, Effect of Mn on Annealing Texture, Plastic Anisotropy and Mechanical Properties of Low Carbon Steels Containing 0.067% P, Mater. Trans. A, 1977, 8A, p 1567–1575CrossRef
10.
Zurück zum Zitat S. Suzuki, M. Obata, K. Abiko, and H. Kimura, Tetsu-to-Hagane [in Japanese], Trans. ISIJ, 1985, 25, p 62–68CrossRef S. Suzuki, M. Obata, K. Abiko, and H. Kimura, Tetsu-to-Hagane [in Japanese], Trans. ISIJ, 1985, 25, p 62–68CrossRef
11.
Zurück zum Zitat J.W. Stewart, J.A. Charles, and E.R. Wallach, Iron–Phosphorus–Carbon Systems Part-1 Mechanical Properties of Low Carbon Iron–Phosphorus System, Mater. Sci. Technol., 2000, 16(3), p 275–282CrossRef J.W. Stewart, J.A. Charles, and E.R. Wallach, Iron–Phosphorus–Carbon Systems Part-1 Mechanical Properties of Low Carbon Iron–Phosphorus System, Mater. Sci. Technol., 2000, 16(3), p 275–282CrossRef
12.
Zurück zum Zitat P. Ghosh, C. Ghosh, and R.K. Ray, Precipitation in Interstitial Free High Strength Steels, ISIJ Int., 2009, 49, p 1080–1086CrossRef P. Ghosh, C. Ghosh, and R.K. Ray, Precipitation in Interstitial Free High Strength Steels, ISIJ Int., 2009, 49, p 1080–1086CrossRef
13.
Zurück zum Zitat S. Hong, S.Y. Shin, J. Lee, C.H. Lee, and S. Lee, Effect of Phosphorous and Boron Addition on Microstructural Evolution and Charpy Impact Properties of High-Phosphorous-Containing Plain Carbon Steels, Mater. Sci. Eng. A, 2013, A564, p 461–472CrossRef S. Hong, S.Y. Shin, J. Lee, C.H. Lee, and S. Lee, Effect of Phosphorous and Boron Addition on Microstructural Evolution and Charpy Impact Properties of High-Phosphorous-Containing Plain Carbon Steels, Mater. Sci. Eng. A, 2013, A564, p 461–472CrossRef
14.
Zurück zum Zitat D. Sharma, K. Chandra, and P.S. Mishra, Design and Development of Powder Processed Fe-P Based Alloys, J. Mater. Design, 2011, 32, p 3198–3204CrossRef D. Sharma, K. Chandra, and P.S. Mishra, Design and Development of Powder Processed Fe-P Based Alloys, J. Mater. Design, 2011, 32, p 3198–3204CrossRef
15.
Zurück zum Zitat Gauthama and R. Balasubramaniam, Alloy Design of Ductile Phosphoric Iron: Idea from Archaeometallurgy, Bull. Mater. Sci., 2003,26, p 483-491 Gauthama and R. Balasubramaniam, Alloy Design of Ductile Phosphoric Iron: Idea from Archaeometallurgy, Bull. Mater. Sci., 2003,26, p 483-491
16.
Zurück zum Zitat Y. Mehta and P.S. Mishra, Thermo-Mechanical Processing of Iron–Phosphorous–Carbon Alloys, Journal of Minerals & Materials Characterization & Engineering, 2011, 10(1), p 93–100CrossRef Y. Mehta and P.S. Mishra, Thermo-Mechanical Processing of Iron–Phosphorous–Carbon Alloys, Journal of Minerals & Materials Characterization & Engineering, 2011, 10(1), p 93–100CrossRef
17.
Zurück zum Zitat A. Ghosh and S. Hecker, Failure in Thin Sheets Stretched Over Rigid Punches, Metallurgical and Materials Transactions A, 1975, 6(4), p 1065–1074CrossRef A. Ghosh and S. Hecker, Failure in Thin Sheets Stretched Over Rigid Punches, Metallurgical and Materials Transactions A, 1975, 6(4), p 1065–1074CrossRef
18.
Zurück zum Zitat N.P. Allen, Iron and its Dilute Solid Solutions, Willey Interscience, New York, 1963, p 271–308 N.P. Allen, Iron and its Dilute Solid Solutions, Willey Interscience, New York, 1963, p 271–308
19.
Zurück zum Zitat B.D. Clarke and I.D. McIvor, Ironmaking & Steelmaking, 1989, 16, p 335–344 B.D. Clarke and I.D. McIvor, Ironmaking & Steelmaking, 1989, 16, p 335–344
20.
Zurück zum Zitat X. Qu, S. Gowri, and J.A. Lund, Sintering Behaviour and Strength of Fe-Si-P Compacts, Int. J Powder Metall., 1991, 27(1), p 9–13 X. Qu, S. Gowri, and J.A. Lund, Sintering Behaviour and Strength of Fe-Si-P Compacts, Int. J Powder Metall., 1991, 27(1), p 9–13
21.
Zurück zum Zitat D. Ravi Kumar, Formability Analysis of Extra-Deep Drawing Steel, J. Mater. Process. Technol., 2002, 130–131, p 32–42 D. Ravi Kumar, Formability Analysis of Extra-Deep Drawing Steel, J. Mater. Process. Technol., 2002, 130–131, p 32–42
Metadaten
Titel
Effect of Annealing on Mechanical Properties and Formability of Cold Rolled Thin Sheets of Fe-P P/M Alloys
verfasst von
Shefali Trivedi
D. Ravi Kumar
S. Aravindan
Publikationsdatum
08.08.2016
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 10/2016
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-016-2272-4

Weitere Artikel der Ausgabe 10/2016

Journal of Materials Engineering and Performance 10/2016 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.