nach oben

Physics of Metals and Metallography

Erschienen in:

01.06.2024 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Effect of Annealing Twins on Grain Boundary Migration in High-Purity Copper

verfasst von: N. V. Sakharov, V. N. Chuvil’deev

Erschienen in: Physics of Metals and Metallography | Ausgabe 6/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The effect of grain boundary retardation by annealing twins in pure copper has been experimentally and theoretically investigated. A model that describes the influence of annealing twins on the migration of grain boundaries in pure metals has been proposed. The retarding force from the twins has been demonstrated to be analogous to the Zener retarding force created by incoherent fine particles. An equation has been derived to calculate the retarding force induced by annealing twins. The force has been demonstrated to be inversely proportional to the size of the twins and directly proportional to their volume fraction. The simulation results have been compared with the experimental results. A satisfactory correlation between the theoretical and experimental results has been achieved.

Vorheriger Artikel Electro-Optic Effect in Hexagonal Compounds RFeO3

Nächster Artikel On the Effect of Heating of Two-Phase Alloyed Brasses on Morphological Peculiarities of Intermetallic Inclusions

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

A. Rollett, G. Rohrer, and J. Humphreys, Recrystallization and Related Annealing Phenomena (Elsevier, 2017).

S.-W. Wang, H.-W. Song, Ya. Chen, S.-H. Zhang, and H.-H. Li, “Evolution of annealing twins and recrystallization texture in thin-walled copper tube during heat treatment,” Acta Metall. Sin. (Engl. Lett.) 33, 1618–1626 (2020). https://doi.org/10.1007/s40195-020-01090-4

X. P. Chen, L. F. Li, H. F. Sun, L. X. Wang, and Q. Liu, “Studies on the evolution of annealing twins during recrystallization and grain growth in highly rolled pure nickel,” Mater. Sci. Eng.: A 622, 108–113 (2015). https://doi.org/10.1016/j.msea.2014.11.023CrossRef

D. Horton, C. B. Thomson, and V. Randle, “Aspects of twinning and grain growth in high purity and commercially pure nickel,” Mater. Sci. Eng.: A 203, 408–414 (1995). https://doi.org/10.1016/0921-5093(95)09821-6CrossRef

V. Randle, P. R. Rios, and Y. Hu, “Grain growth and twinning in nickel,” Scr. Mater. 58, 130–133 (2008). https://doi.org/10.1016/j.scriptamat.2007.09.016CrossRef

Y. Jin, B. Lin, A. D. Rollett, G. S. Rohrer, M. Bernacki, and N. Bozzolo, “Thermo-mechanical factors influencing annealing twin development in nickel during recrystallization,” J. Mater. Sci. 50, 5191–5203 (2015). https://doi.org/10.1007/s10853-015-9067-0CrossRef

J. Yang, J. Luo, X. Li, and M. Li, “Evolution mechanisms of recrystallized grains and twins during isothermal compression and subsequent solution treatment of GH4586 superalloy,” J. Alloys Compd. 850, 156732 (2021). https://doi.org/10.1016/j.jallcom.2020.156732CrossRef

S. Mandal, A. K. Bhaduri, and V. S. Sarma, “Studies on twinning and grain boundary character distribution during anomalous grain growth in a Ti-modified austenitic stainless steel,” Mater. Sci. Eng.: A 515, 134–140 (2009). https://doi.org/10.1016/j.msea.2009.02.042CrossRef

X.-M. Chen, Y. C. Lin, and F. Wu, “EBSD study of grain growth behavior and annealing twin evolution after full recrystallization in a nickel-based superalloy,” J. Alloys Compd. 724, 198–207 (2017). https://doi.org/10.1016/j.jallcom.2017.07.027CrossRef

10.

Zh. Li, L. Zhang, N. Sun, Ya. Sun, and A. Shan, “Effects of prior deformation and annealing process on microstructure and annealing twin density in a nickel based alloy,” Mater. Charact. 95, 299–306 (2014). https://doi.org/10.1016/j.matchar.2014.07.013CrossRef

11.

C. Y. Cui, Y. F. Gu, Y. Yuan, T. Osada, and H. Harada, “Enhanced mechanical properties in a new Ni–Co base superalloy by controlling microstructures,” Mater. Sci. Eng.: A 528 (16–17), 5465–5469 (2011). https://doi.org/10.1016/j.msea.2011.03.085CrossRef

12.

Yu. Gao, Yu. Ding, J. Chen, J. Xu, Yu. Ma, and X. Wang, “Effect of twin boundaries on the microstructure and mechanical properties of Inconel 625 alloy,” Mater. Sci. Eng.: A 767, 138361 (2019). https://doi.org/10.1016/j.msea.2019.138361CrossRef

13.

M. Qian and J. C. Lippold, “The effect of annealing twin-generated special grain boundaries on HAZ liquation cracking of nickel-base superalloys,” Acta Mater. 51, 3351–3361 (2003). https://doi.org/10.1016/s1359-6454(03)00090-9CrossRef

14.

D. B. Bober, J. Lind, R. P. Mulay, T. J. Rupert, and M. Kumar, “The formation and characterization of large twin related domains,” Acta Mater. 129, 500–509 (2017). https://doi.org/10.1016/j.actamat.2017.02.051CrossRef

15.

W. Wang, F. Brisset, A. L. Helbert, D. Solas, I. Drouelle, M. H. Mathon, and T. Baudin, “Influence of stored energy on twin formation during primary recrystallization,” Mater. Sci. Eng., A 589, 112–118 (2014). https://doi.org/10.1016/j.msea.2013.09.071CrossRef

16.

T. Baudin, A. L. Etter, and R. Penelle, “Annealing twin formation and recrystallization study of cold-drawn copper wires from EBSD measurements,” Mater. Charact. 58, 947–952 (2007). https://doi.org/10.1016/j.matchar.2006.09.009CrossRef

17.

J. Mccarley and S. Tin, “Understanding the effects of recrystallization and strain induced boundary migration on ∑3 twin boundary formation in Ni-base superalloys during iterative sub-solvus annealing,” Mater. Sci. Eng.: A 740–741, 427–438 (2019). https://doi.org/10.1016/j.msea.2018.10.013CrossRef

18.

G. R. Ebrahimi, A. Momeni, H. R. Ezatpour, M. Jahazi, and P. Bocher, “Dynamic recrystallization in Monel400 Ni–Cu alloy: Mechanism and role of twinning,” Mater. Sci. Eng.: A 744, 376–385 (2019). https://doi.org/10.1016/j.msea.2018.12.045CrossRef

19.

Y. Jin, B. Lin, M. Bernacki, G. S. Rohrer, A. D. Rollett, and N. Bozzolo, “Annealing twin development during recrystallization and grain growth in pure nickel,” Mater. Sci. Eng., A 597, 295303 (2014). https://doi.org/10.1016/j.msea.2014.01.018CrossRef

20.

N. K. Sharma and Sh. Shekhar, “New insights into the evolution of twin boundaries during recrystallization and grain growth of low-SFE FCC alloys,” Mater. Charact. 159, 110015 (2020). https://doi.org/10.1016/j.matchar.2019.110015CrossRef

21.

Z.-L. Du, X.-G. Liu, J.-T. Gui, Y.-J. Ke, and L.‑F. Zhang, “Influence of MnS inclusions on dynamic recrystallization and annealing twins formation during thermal deformation,” J. Mater. Res. Technol. 16, 1371–1387 (2022). https://doi.org/10.1016/j.jmrt.2021.12.088CrossRef

22.

Ch. S. Pande and M. A. Imam, “Grain growth and twin formation in boron-doped nickel polycrystals,” Mater. Sci. Eng.: A 512, 82–86 (2009). https://doi.org/10.1016/j.msea.2009.01.030CrossRef

23.

L. X. Wang, X. P. Chen, D. Chen, H. F. Sun, and Q. Liu, “Effect of preferential orientation on the annealing twins during the low temperature treatment in nickel,” Mater. Sci. Eng.: A 676, 48–55 (2016). https://doi.org/10.1016/j.msea.2016.08.092CrossRef

24.

R. L. Fullman and J. C. Fisher, “Formation of annealing twins during grain growth,” J. Appl. Phys. 22, 1350–1355 (1951). https://doi.org/10.1063/1.1699865CrossRef

25.

H. Gleiter, “The formation of annealing twins,” Acta Metall. 17, 1421–1428 (1969). https://doi.org/10.1016/0001-6160(69)90004-2CrossRef

26.

M. A. Meyers and L. E. Murr, “A model for the formation of annealing twins in F.C.C. metals and alloys,” Acta Metall. 26, 951–962 (1978). https://doi.org/10.1016/0001-6160(78)90046-9CrossRef

27.

J. Huber and M. Hatherly, “Nucleation of recrystallized grains in heavily cold-worked α-brass,” Met. Sci. 13, 665–669 (1979). https://doi.org/10.1179/030634579790434268CrossRef

28.

C. R. M. Grovenor, D. A. Smith, and M. J. Goringe, “Nucleation and migration of high angle grain boundaries in bilayer foils I: Nucleation,” Thin Solid Films 74, 257–267 (1980). https://doi.org/10.1016/0040-6090(80)90089-9CrossRef

29.

S. Mahajan, C. S. Pande, M. A. Imam, and B. B. Rath, “Formation of annealing twins in f.c.c. crystals,” Acta Mater. 45, 2633–2638 (1997). https://doi.org/10.1016/s1359-6454(96)00336-9CrossRef

30.

J. R. Cahoon, Q. Li, and N. L. Richards, “Microstructural and processing factors influencing the formation of annealing twins,” Mater. Sci. Eng.: A 526, 56–61 (2009). https://doi.org/10.1016/j.msea.2009.07.021CrossRef

31.

M. Y. Gryaznov, A. N. Sysoev, and V. N. Chuvil’deev, “Internal friction in microcrystalline metals, part 1: Experimental studies of microcrystalline copper and nickel,” Materialovedenie, No. 5, 107116 (1999).

32.

F. Bachmann, R. Hielscher, and H. Schaeben, “Texture analysis with MTEX–Free and open source software toolbox,” Solid State Phenom. 160, 63–68 (2010). https://doi.org/10.4028/www.scientific.net/ssp.160.63CrossRef

33.

V. N. Chuvil’deev, Nonequilibrium Grain Boundaries in Metals. Theory and Applications (Fizmatlit, Moscow, 2004) [in Russian].

34.

N. V. Sakharov and V. N. Chuvil’deev, “Analysis of the effect of impurities on primary recrystallization in pure metals,” Phys. Met. Metallogr. 123, 797–803 (2022). https://doi.org/10.1134/S0031918X22080099CrossRef

35.

J. W. Taylor, “An evaluation of interface energies in metallic systems,” J. Inst. Met. 86, 456–463 (1957–1958).

36.

A. N. Orlov, V. N. Perevezentsev, and V. V. Rybin, Grain Boundaries in Metals (Moscow, 1980) [in Russian].

37.

C. J. Smithells, Metals Reference Book (Butterworths, London, 1976).

Titel: Effect of Annealing Twins on Grain Boundary Migration in High-Purity Copper
verfasst von: N. V. Sakharov
V. N. Chuvil’deev
Publikationsdatum: 01.06.2024
Verlag: Pleiades Publishing
Erschienen in: Physics of Metals and Metallography / Ausgabe 6/2024
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X24600167

Surface Modification of Zr–Nb Alloy by Nanosecond Pulse Laser Processing

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Influence of Magnetic Field on Phase Transitions in the Antiferromagnetic Potts Model

ELECTRICAL AND MAGNETIC PROPERTIES

Microstructure of Fracture Surfaces after Radial Compression of Annular Specimens Made of Cladding Austenitic Steel Exposed to Damaging Dose above 100 dpa

STRENGTH AND PLASTICITY

On the Effect of Heating of Two-Phase Alloyed Brasses on Morphological Peculiarities of Intermetallic Inclusions

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Structure and Surface Properties of Stable Austenitic Steel Subjected to Liquid Carburizing at Lowered Temperature

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Structural–Phase Transformations and Crystallographic Texture in Commercial Ti–6Al–4V Alloy with Globular Morphology of α-Phase Grains: The Rolling Plane

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Surface Modification of Zr–Nb Alloy by Nanosecond Pulse Laser Processing

Influence of Magnetic Field on Phase Transitions in the Antiferromagnetic Potts Model

Microstructure of Fracture Surfaces after Radial Compression of Annular Specimens Made of Cladding Austenitic Steel Exposed to Damaging Dose above 100 dpa

On the Effect of Heating of Two-Phase Alloyed Brasses on Morphological Peculiarities of Intermetallic Inclusions

Structure and Surface Properties of Stable Austenitic Steel Subjected to Liquid Carburizing at Lowered Temperature

Structural–Phase Transformations and Crystallographic Texture in Commercial Ti–6Al–4V Alloy with Globular Morphology of α-Phase Grains: The Rolling Plane