nach oben

Polymer Bulletin

Erschienen in:

24.09.2019 | Original Paper

Effect of cationic and anionic clays as supports for styrene polymerization initiated by metallocenes/MAO catalytic system

verfasst von: K. Belalem, A. Benaboura, D. Lerari, N. Kanoun, R. Chebout

Erschienen in: Polymer Bulletin | Ausgabe 8/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This contribution relates to the study of the comparative behavior of cationic and anionic fillers used as supports for metallocenes-based catalytic systems on styrene polymerization. We report our investigations about the preparation of stereoregular polystyrene using an Algerian clay (montmorillonite type) and layered double hydroxide (LDH) nanofillers as cationic or anionic supports, respectively. The effect of the nature support on the performance of catalytic systems was evaluated. The conversion and the stereoregularity of the obtained polystyrene were discussed according to the used catalyst biscyclopentadienyl zirconium dichloride (Cp₂ZrCl₂) or biscyclopentadienyl titanium dichloride (Cp₂TiCl₂) and support OMMT or LDH. The structure of prepared supports and obtained polymers was examined by Fourier transform infrared spectroscopy, wide-angle X-ray scanning and scanning electronic microscopy. Thermal properties were evaluated by thermogravimetric analysis and differential scanning calorimetry. Interestingly, the obtained results show that the presence of filler has an important effect on the polystyrene tacticity and thermal properties.

Vorheriger Artikel Effects of phosphorus-containing aromatic polyamide and organo-modified hydroxyapatite nanoparticles on the thermal, combustion and mechanical properties of polyvinyl chloride

Nächster Artikel Effect of hollow glass microsphere on the flame retardancy and combustion behavior of intumescent flame retardant polypropylene composites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Brintzinger H-H, Fischer D, Mulhaupt R, Rieger B, Waymouth R (1995) Stereospecific olefin polymerization with chiral metallocene catalysts. Angew Chem Inter Edit Engl 34:1143. https://doi.org/10.1002/anie.199511431 CrossRef

Kaminsky W (1996) New polymers by metallocene catalysis. Macro Chem Phys 197:3907–3945. https://doi.org/10.1002/macp.1996.021971201 CrossRef

Schellenberg J (2010) Syndiotactic polystyrene: synthesis, vol 12. Wiley, New Jersey, p 18

Kaminsky W, Funck A, Hahnsen H (2009) New application for metallocene catalysts in olefin polymerization. Dalton Trans 41:8803. https://doi.org/10.1039/b910542p CrossRef

Kaminsky W (1998) Highly active metallocene catalysts for olefin polymerization. J Chem Soc Dalton Trans 9:1413CrossRef

Hammawa H, Wanke S-E (2006) Polymer-supported metallocene/MAO catalyst for olefin polymerization. Appl polym sci 3:175

Soga K, Kaminaka M (1992) Polymerization of propene with the heterogeneous catalyst system Et[IndH₄]₂ZrCl₂/MAO/SiO₂ combined with trialkylaluminium. Macromol Rap Commun 13:221. https://doi.org/10.1002/macp.1996.021971201 CrossRef

Kaminaka M, Soga K (1991) Polymerization of propene with the catalyst systems composed of Al₂O₃- or MgCl₂-supported Et[IndH4]2ZrCl2 and AlR3 (R = CH3, C2H5). Macromol Rap Commun 12:367. https://doi.org/10.1002/marc.1991.030120611 CrossRef

Soga K, Shiono T, Kim HJ (1993) Activation of SiO₂-supported zirconocene catalysts by common trialkylaluminiums. Macromol Chem Phys 194:3499. https://doi.org/10.1002/macp.1993.021941227 CrossRef

10.

Kaminsky W, Renner F (1993) High melting polypropenes by silica-supported zirconocene catalysts. Macromol Rap Commun 14:239. https://doi.org/10.1002/marc.1993.030140404 CrossRef

11.

Soga K, Kim HJ, Shiono T (1994) Polymerization of propene with highly isospecific. SiO₂-supported zirconocene catalysts activated with common alkylaluminiums. Macromol Chem Phys 195:3347. https://doi.org/10.1002/macp.1994.021951006 CrossRef

12.

Soga K, Ban HT, Arai T, Uozumi T (1997) Propene polymerization with zirconocene catalysts supported on siloxane copolymers. Macromol Chem Phys 198:2779. https://doi.org/10.1002/macp.1997.021980910 CrossRef

13.

Soga K, Shiono T, Kim HJ (1993) Activation of SiO₂-supported zirconocene catalysts by common trialkylaluminiums. Macromol Chem Phys 194:3499. https://doi.org/10.1002/macp.1993.021941227 CrossRef

14.

Li YG, Liu GD, Yu GQ (1989) Catalytic activity of polymer-supported neodymium complexes in the polymerization of butadiene. J Macromol Sci Chem 26(2–3):405. https://doi.org/10.1080/00222338908051983 CrossRef

15.

Janiak C, Rieger B, Voelkel R, Braun HG (1993) Polymeric aluminoxanes: a possible cocatalytic support material for Ziegler–Natta-type metallocene catalysts. J Polym Sci Polym Chem 31:2959. https://doi.org/10.1002/pola.1993.080311211 CrossRef

16.

Longun J, Iroh JO (2013) Polyimide/substituted polyaniline–copolymer–nanoclay composite thin films with high damping abilities. J Appl Polym Sci 128:1425. https://doi.org/10.1002/app.36794 CrossRef

17.

Kaneko MLQA, Romero RB, de Paiva REF, Felisberti MI, Gonçalves MC (2013) Improvement of toughness in polypropylene nanocomposite with the addition of organoclay/silicone copolymer masterbatch. Polym Comp 34:194–203. https://doi.org/10.1002/pc.22393 CrossRef

18.

Abdolrasouli MH, Behzadfar E, Nazockdast H, Sharif F (2012) Structure development and melt viscoelastic properties of PE/organoclay nanocomposite blown films. J Appl Polym Sci 125:435–444. https://doi.org/10.1002/app.36510 CrossRef

19.

Abedi S, Abdouss M (2014) A review of clay-supported Ziegler–Natta catalysts for production of polyolefin/clay nanocomposites through in situ polymerization. Appl Cataly A: General 475:386. https://doi.org/10.1016/j.apcata.2014.01.028 CrossRef

20.

Cavani F, Trifiro F, Vaccari A (1991) Hydrotalcite-type anionic clays: preparation, properties and applications. Cataly Today 11:173. https://doi.org/10.1016/0920-5861(91)80068-K CrossRef

21.

Dias ML, Fernandes RM, Cunha RH, Jaconis S, Silvino AC (2011) Highly filled clay polypropylene nanocomposites prepared by in situ polymerization with clay-supported magnesium/titanium catalysts. Appl Cataly A: General 403:48. https://doi.org/10.1016/j.apcata.2011.06.012 CrossRef

22.

Baniasadi H, Ramazani A, Javannikkhah S (2010) Investigation of in situ prepared polypropylene/clay nanocomposites properties and comparing to melt blending method. Mater Des 31:76. https://doi.org/10.1016/j.matdes.2009.07.014 CrossRef

23.

Du K, He AH, Liu X, Han CC (2007) High-performance exfoliated poly (propylene)/clay nanocomposites by in situ polymerization with a novel Z–N/clay compound catalyst. Macromol Rap Commun 28:2294. https://doi.org/10.1002/marc.200700592 CrossRef

24.

Ma JZ, Hu Qi Y (2001) Synthesis and characterization of polypropylene/clay nanocomposites. J Appl Polym Sci 82:3611. https://doi.org/10.1002/app.2223 CrossRef

25.

Vyazovkin S, Dranca I, Fran XW, Advincula R (2004) Kinetics of the thermal and thermo-oxidative degradation of a polystyrene–clay nanocomposite. Macromol Rap Commun 25:498. https://doi.org/10.1002/marc.200300214 CrossRef

26.

Lu J, Zhao XP (2004) A new approach of enhancing the shear stress of electrorheological fluids of montmorillonite nanocomposite by emulsion intercalation of poly-N-methaniline. J Colloid Interface Sci 273:651. https://doi.org/10.1016/j.jcis.2004.02.066 CrossRefPubMed

27.

Kim YK, Choi YS, Wang MH, Chnug I (2002) Synthesis of exfoliated PS/Na–MMT nanocomposites via emulsion polymerization. Chem Mater 14:4990. https://doi.org/10.1021/cm020324h CrossRef

28.

Kornmann X, Lindberg H, Berglund LA (2001) Synthesis of epoxy–clay nanocomposites: influence of the nature of the clay on structure. Polym 42:1303. https://doi.org/10.1016/S0032-3861(00)00346-3 CrossRef

29.

Du J, Wang J, Su S, Wilkie C (2004) Additional XPS studies on the degradation of poly (methyl methacrylate) and polystyrene nanocomposites. Polym Degrad Stab 83:29. https://doi.org/10.1016/S0141-3910(03)00198-8 CrossRef

30.

Tidjani A, Wilkie CA (2001) Photo-oxidation of polymeric-inorganic nanocomposites: chemical, thermal stability and fire retardancy investigations. Polym Degrad Stab 74:33. https://doi.org/10.1016/S0141-3910(01)00061-1 CrossRef

31.

Li Y, Ishida H (2003) Solution intercalation of polystyrene and the comparison with poly (ethyl methacrylate). Polymer 44:6571. https://doi.org/10.1016/S0032-3861(03)00683-9 CrossRef

32.

Okamoto M, Morita S, Taguchi H, Kim YH, Kotaka T, Tateyama H (2000) Synthesis and structure of smectic clay/poly (methyl methacrylate) and clay/polystyrene nanocomposites via in situ intercalative polymerization. Polymer 41:3887. https://doi.org/10.1016/S0032-3861(99)00655-2 CrossRef

33.

Chen G, Ma Y, Qi Z (2001) Preparation and morphological study of an exfoliated polystyrene/montmorillonite nanocomposite. Scr Mater 44:125–128. https://doi.org/10.1016/S1359-6462(00)00563-7 CrossRef

34.

Fu X, Qutubuddin S (2000) Synthesis of polystyrene–clay nanocomposites. Mater Lett 42:12. https://doi.org/10.1016/S0167-577X(99)00151-2 CrossRef

35.

Robello DR, Yamaguchi N, Blanton T, Barnes C (2004) Spontaneous formation of an exfoliated polystyrene–clay nanocomposite using a star-shaped polymer. J Am chem soc 126:8118. https://doi.org/10.1021/ja048211h CrossRefPubMed

36.

Choi YS, Wang KH, Xu M, Chung IJ (2002) Synthesis of exfoliated polyacrylonitrile/Na–MMT nanocomposites via emulsion polymerization. Chem Mater 14:2936. https://doi.org/10.1021/cm0116020 CrossRef

37.

Essawy HA, Badran AS, Youssef AM, El-Fettouh A, El-Hakim AA (2004) Polystyrene/montmorillonite nanocomposites prepared by in situ intercalative polymerization: influence of the surfactant type. Macromol Chem Phys 205:2366. https://doi.org/10.1002/macp.200400227 CrossRef

38.

Dong Z, Liu Z, Zhang J, Han B, Sun D, Wang Y (2004) Synthesis of montmorillonite/polystyrene nanocomposites in supercritical carbon dioxide. J Appl Polym Sci 94:1194. https://doi.org/10.1002/app.21028 CrossRef

39.

Wang D, Zhu J, Yao Q, Wilkie CA (2002) A comparison of various methods for the preparation of polystyrene and poly (methyl methacrylate) clay nanocomposites. Chem Mater 14:3837. https://doi.org/10.1021/cm011656 CrossRef

40.

Tripathy AR, Burgaz E, Kukureka SN, MacKnight WJ (2003) Poly (butylene terephthalate) nanocomposites prepared by in situ polymerization. Macromol 36:8593. https://doi.org/10.1021/ma021364 CrossRef

41.

Oriakhi CO, Farr IV, Lerner MM (1996) Incorporation of poly(acrylic acid), poly(vinylsulfonate) and poly(styrenesulfonate) within layered double hydroxides. J Mater Chem 6:103. https://doi.org/10.1039/JM9960600103 CrossRef

42.

Reichle WT (1986) Synthesis of anionic clay minerals (mixed metal hydroxides, hydrotalcite). Solid State Ionics 22:135. https://doi.org/10.1016/0167-2738(86)90067-6 CrossRef

43.

Miyata S (1977) Industrial uses of hydrotalcite-like compounds. Kagaku Gijutsushi MOL 15(10):32

44.

Miyata S (1980) Industrial uses of hydrotalcite-like compounds. Chem. Abstr. 93:49473

45.

Vaccari A (1998) Preparation and catalytic properties of cationic and anionic clays. Catal Today 41:53. https://doi.org/10.1016/S0920-5861(98)00038-8 CrossRef

46.

Lin JJ, Juang TY (2004) Intercalation of layered double hydroxides by poly(oxyalkylene)-amidocarboxylates: tailoring layered basal spacing. Polym 45:7887. https://doi.org/10.1016/j.polymer.2004.09.031 CrossRef

47.

Liao CS, Ye WB (2004) Structure and conductive properties of poly (ethylene oxide)/layered double hydroxide nanocomposite. Polym Electrolytes Electrochimica Acta 49:4993. https://doi.org/10.1016/j.electacta.2004.06.018 CrossRef

48.

Vielle L, Taviot-Guého C, Besse JP, Leroux F (2003) Hydrocalumite and its polymer derivatives. 2. Polymer incorporation versus in situ polymerization of styrene-4-sulfonate. Chem Mater 15:4369. https://doi.org/10.1021/cm031070i CrossRef

49.

Roland-Swanson C, Besse JP, Leroux F (2004) Polymerization of sulfopropyl methacrylate, a surface active monomer, within layered double hydroxide. Chem Mater 16:5512. https://doi.org/10.1021/cm040165x CrossRef

50.

Moujahid EM, Dubois M, Besse JP, Leroux F (2002) Role of atmospheric oxygen for the polymerization of interleaved aniline sulfonic acid in LDH. Chem Mater 14:3799. https://doi.org/10.1021/cm0211094 CrossRef

51.

Vaysee C, Guerlou-Demourgues L, Delmas C, Duguet E (2004) Tentative mechanisms for acrylate intercalation and in situ polymerization in nickel-based layered double hydroxides. Macromolecules 37:45. https://doi.org/10.1021/ma025882w CrossRef

52.

Vaysee C, Guerlou-Demourgues L, Duguet E, Delmas C (2003) Acrylate intercalation and in situ polymerization in iron-, cobalt-, or manganese-substituted nickel hydroxides. Inorg Chem 42:4559. https://doi.org/10.1021/ic026229s CrossRef

53.

Moujahid EM, Inacio J, Besse JP, Leroux F (2003) Adsorption of styrene sulfonate polystyrene sulfonate on layered double hydroxides. Microporous Mesoporous Mater 57:37. https://doi.org/10.1016/S1387-1811(02)00505-X CrossRef

54.

Moujahid EM, Besse JP, Leroux F (2002) Synthesis and characterization of a polystyrene sulfonate layered double hydroxide nanocomposite. In-situ polymerization vs. polymer incorporation. J Mater Chem 12:3324. https://doi.org/10.1039/b205837p CrossRef

55.

Kumar M, Chakraborty S, Upadhyaya P, Pugazhenthi G (2018) Morphological, mechanical and thermal features of PMMA nanocomposites containing two-dimensional Co–Al layered double hydroxide. J Appl Polym Sci 135:45774. https://doi.org/10.1002/app.45774 CrossRef

56.

Matusinovic Z, Rogos M, Juraj S, Ipus IC, Macan J (2008) Polymer nanocomposite materials based on polystyrene and a layered aluminate filler. Polym Eng Sci 48:2027. https://doi.org/10.1002/pen.21034 CrossRef

57.

Matusinovic Z, Rogos M, Juraj S, Ipus IC (2009) Synthesis and characterization of poly(styrene-co-methyl methacrylate)/layered double hydroxide nanocomposites via in situ polymerization. Polym Degrad Stab 94:95. https://doi.org/10.1016/j.polymdegradstab.2008.10.001 CrossRef

58.

Lerari D, Peetebroeck S, Benali S, Benaboura A, Dubois P (2010) Use of a new natural clay to produce poly (methyl methacrylate) based nanocomposites. Polym Inter 59:71. https://doi.org/10.1002/pi.2691 CrossRef

59.

Sahu B, Pugazhenthi G (2011) Properties of polystyrene/organically modified layered double hydroxide nanocomposites synthesized by solvent blending method. J Appl Polym Sci 120:2485. https://doi.org/10.1002/app.33467 CrossRef

60.

Tsai TY, Lin MJ, Chuang YCP, Chou C (2013) Effects of modified clay on the morphology and thermal stability of PMMA/clay nanocomposites. Mater Chem Phys 138:230. https://doi.org/10.1016/j.matchemphys.2012.11.051 CrossRef

61.

Manzi-Nshuti C, Chen D, Su S, Wilkie CA (2009) The Effects of intra layer metal composition of layered double hydroxides on glass transition dispersion thermal and fire properties of their PMMA nanocomposites. Thermochim Acta 495:63. https://doi.org/10.1016/j.tca.2009.06.001 CrossRef

62.

Dubois P, Alexander M, Jerome R (2003) Polymerization-filled composites and nanocomposites by coordination catalysis. Macromol Symp 194:13. https://doi.org/10.1002/masy.200390073 CrossRef

63.

Schellenberg J, Tomotsu N (2002) Syndiotactic polystyrene catalysts and polymerization. Prog Polym Sci 27:1925CrossRef

64.

Zambelli A, Oliva L, Pellecchia C (1989) Soluble catalysts for syndiotactic polymerization of styrene. Macromolecules 22:2129. https://doi.org/10.1021/ma00195a021 CrossRef

65.

Bruzaud S, Grohens Y, Ilinca S, Carpentier JF (2005) Syndiotactic polystyrene/organoclay nanocomposites: synthesis via in situ coordination–insertion polymerization and preliminary characterization. Macromol Mater Eng 290:1106. https://doi.org/10.1002/mame.200500220 CrossRef

66.

Lopez LC, Cieslinski RC, Putzig CL, Wesson RD (1995) Morphological characterization of injection moulded syndiotactic polystyrene. Polymer 36:2331. https://doi.org/10.1016/0032-3861(95)97330-I CrossRef

67.

Kumar M, Chaudhary V, Suresh K, Pugazgenthu G (2015) Synthesis and characterization of exfoliated PMMA/Co–Al LDH nanocomposites via solvent blending technique. RSC. Adv 5:39810. https://doi.org/10.1039/C5RA03057As CrossRef

68.

Kumar M, Chakraborty S, Upadhyaya P, Pugazhenthi G (2018) Morphological, mechanical, and thermal features of PMMA nanocomposites containing two-dimensional Co–Al layered double hydroxide. J Appl Polym Sci 135:45774. https://doi.org/10.1002/app.45774 CrossRef

69.

Realinho V, Antunes M, Arencon D, Fernandez AI, Velasco JI (2009) Effect of a dodecylsulfate-modified magnesium–aluminum layered double hydroxide on the morphology and fracture of polystyrene and poly(styrene-co-acrylonitrile). J Appl Polym Sci 111:2574. https://doi.org/10.1002/app.29288 CrossRef

70.

Dias ML, Fernandes RM, Cunha RH, Jaconis S, Silvino AC (2011) Highly filled clay polypropylene nanocomposites prepared by in situ polymerization with clay-supported magnesium/titanium catalysts. Appl cataly A. General 403:48. https://doi.org/10.1016/J.apcata.2011.06.012 CrossRef

71.

Rodrigues AS, Kirillov E, Carpentier JF (2008) Group 3 and 4 single-site catalysts for stereospecific polymerization of styrene. Coord Chem Rev 252:2115. https://doi.org/10.1016/j.ccr.2007.12.015 CrossRef

Titel: Effect of cationic and anionic clays as supports for styrene polymerization initiated by metallocenes/MAO catalytic system
verfasst von: K. Belalem
A. Benaboura
D. Lerari
N. Kanoun
R. Chebout
Publikationsdatum: 24.09.2019
Verlag: Springer Berlin Heidelberg
Erschienen in: Polymer Bulletin / Ausgabe 8/2020
Print ISSN: 0170-0839
Elektronische ISSN: 1436-2449
DOI: https://doi.org/10.1007/s00289-019-02941-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2020

Synthesis of a novel post-metallocene titanium complex of chelating [ONOO]-type ligand and studies on the effect of an extra donor arm on its reactivity in aqueous emulsion polymerization

Performance tendency and morphological investigations of lignocellulosic tea/polyurethane bio-composite materials

Effects of phosphorus-containing aromatic polyamide and organo-modified hydroxyapatite nanoparticles on the thermal, combustion and mechanical properties of polyvinyl chloride

Effects of cellulose nanocrystal polymorphs and initial state of hydrogels on swelling and drug release behavior of alginate-based hydrogels

Sway of MnO2 with poly(acrylonitrile) in the sulfur-based electrode for lithium–sulfur batteries

Swelling and drug delivery kinetics of click-synthesized hydrogels based on various combinations of PEG and star-shaped PCL: influence of network parameters on swelling and release behavior

Premium Partner

Marktübersichten