nach oben

Erschienen in:

01.12.2022 | Research paper

Effect of laser intensity distribution period on the silver micro-stripes by laser interference induced forward transfer technology and their SERS property

verfasst von: Huijuan Shen, Yaode Wang, Lu Wang, Shenzhi Wang, Ri Liu, Xueying Chu, Jingran Zhang, Changli Li, Zhankun Weng, Zuobin Wang

Erschienen in: Journal of Nanoparticle Research | Ausgabe 12/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The micro-stripe was efficiently transferred by the laser interference-induced forward transfer (LIIFT) technique, composed of Ag nanoparticles (NPs). The effects of the fringe period of the two-beam laser interference on the transferred micro-stripe were discussed. The results showed that the fringe period of the laser interference would affect the particle diameter and spatial distribution of Ag NPs in the micro-stripe transferred. While the fringe period was in the range of 10 to 17 μm, the average diameter of the Ag NPs decreased from 126 to 101 nm with the increase of the period. Moreover, the aggregation of the Ag NPs was improved by increasing the period of the transferred Ag micro-stripe. Finally, the transferred Ag micro-stripe could promote surface-enhanced Raman scattering (SERS). The spectrum intensity of the SERS was significantly enhanced while the transferred Ag micro-stripe was used to the Raman spectrum test of the Rhodamine B (RhB), and the intensity of the Raman spectrum for the RhB was improved with the increase of the Ag NPs micro-stripe period. The results suggested a technique to fabricate the Ag NPs with controllable aggregation efficiently, and further the potential application of the LIIFT technique in the SERS chip of sensitivity detection.

Graphical abstract

Vorheriger Artikel Sono-assisted synthesis of AgFeO2 nanoparticles for efficient removal of Basic Green-4 dye from aqueous solution

Nächster Artikel Atomic layer deposition of self-assembled aluminum nanoparticles using dimethylethylamine alane as precursor and trimethylaluminum as an initiator

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Malinauskas M, Zukauskas A, Hasegawa S, Hayasaki Y, Mizeikis V, Buividas R, Juodkazis S (2016) Ultrafast laser processing of materials: from science to industry. Light: Sci Appl 5:e16133. https://doi.org/10.1038/lsa.2016.133CrossRef

Stankevičius E, Vilkevičius K, Gedvilas M, Bužavaitė-Vertelienė E, Selskis A, Balevičius Z (2021) Direct laser writing for the formation of large-scale gold microbumps arrays generating hybrid lattice plasmon polaritons in Vis-NIR range. Adv. Optical Mater. 2100027. https://doi.org/10.1002/adom.202100027

Macdonald E, Salas R, Espalin D, Perez M, Aguilera E, Muse D, Wicker RB (2014) 3D printing for the rapid prototyping of structural electronics. IEEE Access 2:234–242. https://doi.org/10.1109/ACCESS.2014.2311810CrossRef

Lopes AJ, Mcdonald E, Wicker RB (2012) Integrating stereolithography and direct print technologies for 3D structural electronics fabrication. Rapid Prototyping J 18:129–143. https://doi.org/10.1108/13552541211212113CrossRef

Stansbury JW, Idacavage MJ (2015) 3D printing with polymers: challenges among expanding options and opportunities. Dent Mater 32:54–64. https://doi.org/10.1016/j.dental.2015.09.018CrossRef

Hadibrata W, Wei H, Krishnaswamy S, Aydin K (2021) Inverse design and 3d printing of a metalens on an optical fiber tip for direct laser lithography. Nano Lett 21:242–2428. https://doi.org/10.1021/acs.nanolett.0c04463CrossRef

Lao Z, Xia N, Wang S, Xu T, Wu X, Zhang L (2021) Tethered and untethered 3D microactuators fabricated by two-photon polymerization: a review. Micromachines 12:465 (1–29). https://doi.org/10.3390/mi12040465.

Liao C, Wuethrich A, Trau M (2020) A material odyssey for 3D nano/microstructures: two photon polymerization based nanolithography in bioapplications. Appl Mater Today 19:100635. https://doi.org/10.1016/j.apmt.2020.100635CrossRef

Katsui H, Harada K, Kondo N, Hotta M (2020) Preparation of boron carbon oxynitride phosphor film via laser chemical vapor deposition and annealing. Surf Coat Tech 394:125851. https://doi.org/10.1016/j.surfcoat.2020.125851CrossRef

10.

Katsui H, Harada K, Kondo N, Hotta M (2020) Preparation of zirconium carbonitride by laser chemical vapor deposition using alkyl-amide precursor as a single source. J Ceram Soc Jpn 128:855–862. https://doi.org/10.2109/jcersj2.20081CrossRef

11.

Visser CW, Pohl R, Sun C, Römer WG, Veld I, Huis B, Lohse D (2015) Toward 3D printing of pure metals by laser-induced forward transfer. Adv Mater 27:4087–4092. https://doi.org/10.1002/adma.201501058CrossRef

12.

Breckenfeld E, Kim H, Auyeung RCY, Charipar N, Serra P, Piqué A (2015) Laser induced forward transfer of silver nanopaste for microwave interconnects. Appl Surf Sci 331:254–261. https://doi.org/10.1016/j.apsusc.2015.01.079CrossRef

13.

Sanchez-Aniorte MI, Mouhamadou B, Alloncle AP, Sarnet T, Delaporte P (2016) Laser induced forward transfer for improving fine-line metallization in photovoltaic applications. Appl Phys A 122:595 (1–5). https://doi.org/10.1007/s00339-016-0113-9.

14.

Zenou M, Sa’ar A, Kotler Z, (2015) Laser jetting of femto-liter metal droplets for high resolution 3D printed structures. Sci Rep 5:17265. https://doi.org/10.1038/srep17265CrossRef

15.

Gorodesky N, Sedghani-Cohen S, Fogel O, Silber A, Morales M (2021) Improving compactness of 3D metallic microstructures printed by laser-induced forward transfer. Crystals 11:(1–14). https://doi.org/10.3390/cryst11030291.

16.

Sopea P, Fernández-Pradas JM, Serra P (2020) Laser-induced forward transfer of conductive screen-printing inks. Appl Sur Sci 507:145047. https://doi.org/10.1016/j.apsusc.2019.145047CrossRef

17.

Vallabh CKP, Xiong Y, Zhao X (2021) 3D printing of liquid metal EGaIn through laser induced forward transfer: a proof-of-concept study. Manufacturing Letters 28:42–45. https://doi.org/10.1016/j.mfglet.2021.03.004CrossRef

18.

Ferreira PR, Correr W, Mendona CR (2020) Single-step printing of metallic nanoparticles in 2D micropatterns. J Nanopart Res 22:1–9. https://doi.org/10.1007/s11051-020-04995-4CrossRef

19.

Zacharatos F, Duderstadt M, Alapanis E, Pataiouras L, Kurselis K, Tsoukalas D, Reinhardt C, Papanikolaou N, Chichkov BN, Zergioti I (2020) Laser printing of Au nanoparticles with sub-micron resolution for the fabrication of monochromatic reflectors on stretchable substrates. Opt Laser Technol 135:106660. https://doi.org/10.1016/j.optlastec.2020.106660CrossRef

20.

Gorodesky N, Sedghani-Cohen S, Altman M, Fogel O, Cohen-Taguri G, Fleger Y, Kotler Z, Zalevsky Z (2020) Concurrent formation of metallic glass during laser forward transfer 3D printing. Adv Funct Mater 2001260.https://doi.org/10.1002/adfm.202001260

21.

Wang X, Zhang J, Mei X, Miao J, Wang X (2021) Laser-induced forward transfer of graphene oxide. Appl Phys A 127:1–9. https://doi.org/10.1007/s00339-021-04356-5CrossRef

22.

Wang X, Zhang J, Mei X, Xu B, Miao J (2021) Laser fabrication of fully printed graphene oxide microsensor. Opt Laser Eng 140:106520. https://doi.org/10.1016/j.optlaseng.2020.106520CrossRef

23.

Rapp L, Serein-Spirau F, Lère-Porte JP, Alloncle AP, Delaporte P, Fages F, Videlot-Ackermann C (2012) Laser printing of air-stable high performing organic thin film transistors. Org Electron 13:2035–2041. https://doi.org/10.1016/j.orgel.2012.06.020CrossRef

24.

Makrygianni M, Verrelli E, Boukos N, Chatzandroulis S, Tsoukalas D, Zergioti I (2012) Laser printing and characterization of semiconducting polymers for organic electronics. Appl Phys A 110:559–563. https://doi.org/10.1007/s00339-012-7134-9CrossRef

25.

Tsouti V, Boutopoulos C, Goustouridis D, Zergioti I, Normand P, Tsoukalas D, Chatzandroulis S (2010) A chemical sensor microarray realized by laser printing of polymers. Sensor Actuat B: Chem 150:148–153. https://doi.org/10.1016/j.snb.2010.07.027CrossRef

26.

Hong J (2019) Thermo-mechanical analysis of blister formation on a rigid substrate in blister-actuated laser-induced forward transfer. IEEE T Comp Pack Man 99:1–19. https://doi.org/10.1109/TCPMT.2019.2959708CrossRef

27.

Schiele NR, Corr DT, Raof NA, Xie Y, Chrisey DB (2010) Laser-based direct write techniques for cell printing. Biofabrication 2:32001. https://doi.org/10.1088/1758-5082/2/3/032001CrossRef

28.

Murphy SV, Atala A (2014) 3D bioprinting of tissues and organs. Nat Biotechnol 32:773–785. https://doi.org/10.1038/nbt.2958CrossRef

29.

Gruene M, Pflaum M, Deiwick A, Koch L, Schlie S, Unger C, Wilhelmi M, Haverich A, Chichkov BN (2011) Differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cells. Biofabrication 3:15005. https://doi.org/10.1088/1758-5082/3/1/015005CrossRef

30.

Keriquel V, Guillemot F, Arnault I, Guillotin B, Miraux S, Amédée J, Fricain JC, Catros S (2010) In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice. Biofabrication 2:14101. https://doi.org/10.1088/1758-5082/2/1/014101CrossRef

31.

Bohandy J, Kim BF, Adrian FJ (1986) Metal deposition from a supported metal film using an excimer laser. J Appl Phys 60:1538–1539. https://doi.org/10.1063/1.337287CrossRef

32.

Wu H, Odom TW, Whitesides GM (2002) Reduction photolithography using micro-lens arrays: applications in gray scale photolithography. Anal Chem 74:3267–3273. https://doi.org/10.1021/ac020151fCrossRef

33.

Sikdar D, Pendry JB, Kornyshev AA (2020) Nanoparticle meta-grid for enhanced light extraction from light-emitting devices. Light Sci Appl 9:1–11. https://doi.org/10.1038/s41377-020-00357-wCrossRef

34.

Chen H, Lee J, Lin B, Chen S, Wu S (2018) Liquid crystal display and organic light-emitting diode display: present status and future perspectives. Light Sci Appl 7:17168. https://doi.org/10.1038/lsa.2017.168CrossRef

35.

Li M, Wu J, Wang C, Fang J (2020) The cascade structure of periodic micro/nanoscale Au nano-islands @ Ag-frustum arrays as effective SERS substrates.Vacuum 175:109265. https://doi.org/10.1016/j.vacuum.2020.109265

36.

Stankevičius E, Daugnoraitė E, Ignatjev I, Kuodis Z, Niaura G, Račiukaitis G (2019) Concentric microring structures containing gold nanoparticles for SERS -based applications. Appl Surf Sci 497:143752CrossRef

37.

Gruene M, Pflaum M, Hess C, Diamantouros S, Schlie S, Deiwick A, Chichkov B (2011) Laser printing of three-dimensional multicellular arrays for studies of cell-cell and cell-environment interactions.Tissue Eng. Part C: Me 17:973–982. https://doi.org/10.1089/ten.tec.2011.0185CrossRef

38.

Tseng ML, Chang CM, Chen BH, Huang YW, Chu CH, Chung KS, Liu YJ, Tsai HG, Chu NN, Huang DW, Chiang HP, Tsai DP (2012) Fabrication of plasmonic devices using femtosecond laser-induced forward transfer technique. Nanotechnology 23:444013. https://doi.org/10.1088/0957-4484/23/44/444013CrossRef

39.

Li HJ, Fan WZ, Pan HH, Wang CW, Qian J, Zhao QZ (2017) Fabrication of “petal effect” surfaces by femtosecond laser-induced forward transfer. Chem Phys Lett 667:20–24. https://doi.org/10.1016/j.cplett.2016.11.026CrossRef

40.

Piqué A, Kim H, Auyeung CY (2013) Laser forward transfer of functional materials for digital fabrication of microelectronics. J Imaging Sci Technol 57:040404. https://doi.org/10.2352/J.ImagingSci.Technol.2013.57.4.040404.10.1016/j.apsusc.2019.143752CrossRef

41.

Garliauskas M, Stankevičius E, Račiukaitis G (2017) Laser intensity-based geometry control of periodic submicron polymer structures fabricated by laser interference lithography. Opt Mater Express 7:179–184. https://doi.org/10.1364/OME.7.000179CrossRef

42.

Stankevičius E, Daugnoraitė E, Račiukaitis G (2019) Mechanism of pillars formation using four-beam interference lithography. Opt Laser Eng 116:41–46. https://doi.org/10.1016/j.optlaseng.2018.12.012CrossRef

43.

Zhang Z, Dong L, Ding Y, Li L, Weng Z, Wang Z (2017) Micro and nano dual-scale structures fabricated by amplitude modulation in multi-beam laser interference lithography. Opt Express 25:29135–29142. https://doi.org/10.1364/OE.25.029135CrossRef

44.

Guo X, Li L, Hu Y, Cao L, Dong L, Wang L, Yang Z (2018) Superlens-enhanced laser interference lithography. Appl Phys Express 11:125201. https://doi.org/10.7567/APEX.11.125201CrossRef

45.

Han Y, Weng Z, Cao L, Li L, Liang K, Lian Z, Wang Z (2019) Fabrication of oil-water separation stainless steel mesh via direct laser interference lithography, candle soot deposition, and thermal treatment. J Laser Appl 31:012003. https://doi.org/10.2351/1.5016206CrossRef

46.

Shah A, Parashar A, Mann JS, Sivakumar N (2009) Interference assisted laser induced forward transfer for structured patterning. Open Applied Physics Journal 2:49–52. https://doi.org/10.2174/1874183500902010049CrossRef

47.

Zhao Q, Qiu J, Zhao C, Jiang X, Zhu C (2005) Optical transfer of periodic microstructures by interfering femtosecond laser beams. Opt Express 13:3104–3109. https://doi.org/10.1364/OPEX.13.003104CrossRef

48.

Nakata Y, Hayashi E, Tsubakimoto K, Miyanaga N, Narazaki A, Shoji T, Tsuboi Y (2020) Nanodot array deposition via single shot laser interference pattern using laser-induced forward transfer. Int. J. Extrem. Manuf. 2:025101. CNKI:SUN:IJEG.0.2020–02–007.

49.

Nakata Y, Tsubakimoto K, Miyanaga N, Narazaki A, Tsuboi Y (2021) Laser-induced transfer of noble metal nanodots with femtosecond laser-interference processing. Nanomaterials 11:1–10. https://doi.org/10.3390/nano11020305CrossRef

50.

Abdellatif MH, Abdelrasoul GN, Scarpellini A, Marras S, Diaspro A (2015) Induced growth of dendrite gold nanostructure by controlling self-assembly aggregation dynamics. J Colloid Interf Sci 458:266–272. https://doi.org/10.1016/j.jcis.2015.07.055CrossRef

51.

Abdellatif MH, Keshavan S, Dante S, Salerno M (2017) Induced inhomogeneity in graphene work function due to graphene - TiO₂/Ag/glass substrate interaction. Thin Solid Films 628:43–49. https://doi.org/10.1016/j.tsf.2017.03.011CrossRef

52.

Abdellatif MH, Salerno M, Polovitsyn A, Marras S, Angelis FD (2017) Sensing the facet orientation in silver nano-plates using scanning Kelvin probe microscopy in air. Appl Surf Sci 403:371–377. https://doi.org/10.1016/j.apsusc.2017.01.175CrossRef

53.

Kostovski G, White DJ, Mitchell A, Austin MW, Stoddart PR (2009) Nanoimprinted optical fibres: biotemplated nanostructures for SERS sensing. Biosens Bioelectron 24:1531–1535. https://doi.org/10.1016/j.bios.2008.10.016CrossRef

54.

Verma AK, Das R, Soni RK (2018) Laser fabrication of periodic arrays of microsquares on silicon for SERS application. Appl Surf Sci 427:133–140. https://doi.org/10.1016/j.apsusc.2017.08.143CrossRef

55.

Shen H, Wang Y, Cao L, Xie Y, Wang L, Chu X, Shi K, Wang S, Yu M, Liu R, Zhang J, Li C, Weng Z, Wang Z (2022) Fabrication of periodic microscale stripes of silver by laser interference induced forward transfer and their SERS properties. Nanotechnology 33:115302. https://doi.org/10.1088/1361-6528/ac3e34CrossRef

56.

Wang DP, Wang ZB, Zhang ZA, Yue Y, Li DY, Maple C (2013) Effects of polarization on four-beam laser interference lithography. Appl Phys Lett 102:081903. https://doi.org/10.1063/1.4793752CrossRef

57.

Shen H, Wang Y, Cao L, Xie Y, Wang Y, Zhang Q, Zhang W, Wang S, Han Z, Zhu X, Yu M, Liu R, Gao M, Li C, Weng Z, Wang Z (2021) Fabrication of periodical micro-stripe structure of polyimide by laser interference induced forward transfer technique. Appl Surf Sci 541:148466. https://doi.org/10.1016/j.apsusc.2020.148466CrossRef

58.

Jiang X, Weng Z, Cao L, Zhang Q, Liu R, Li L, Wang Z (2019) Fabrication of silicon nanostripe structures by laser-interference-induced backward transfer technique. Appl Surf Sci 489:983–988. https://doi.org/10.1016/j.apsusc.2019.05.322CrossRef

59.

Wang L, Dong L, Li L, Weng Z, Xu H, Yu M, Wang Z (2018) Fabrication of periodically micropatterned magnetite nanoparticles by laser-interference-controlled electrode position. J Mater Sci 53:3239–3249. https://doi.org/10.1007/s10853-017-1788-9CrossRef

60.

Liu Q, Li W, Cao L, Wang J, Qu Y, Wang X, Liang B (2017) Response of MG63 osteoblast cells to surface modification of Ti-6Al-4V implant alloy by laser interference lithography. J Bionic Eng 14:448–458. https://doi.org/10.1016/S1672-6529(16)60410-9CrossRef

61.

Brown MS, Kattamis NT, Arnold CB (2011) Time-resolved dynamics of laser-induced micro-jets from thin liquid films. Microfluid Nanofluid 11:199–207. https://doi.org/10.1007/s10404-011-0787-4CrossRef

62.

Kattamis NT, Brown MS, Arnold CB (2011) Finite element analysis of blister formation in laser-induced forward transfer. J Mater Res 26:2438–2449. https://doi.org/10.1557/jmr.2011.215CrossRef

63.

Brown MS, Brasz CF, Ventikos Y, Arnold CB (2012) Impulsively actuated jets from thin liquid films for high-resolution printing applications. J Fluid Mech 709:341–370. https://doi.org/10.1017/jfm.2012.337CrossRef

64.

Sun CH, Wang ML, Feng Q, Liu W, Xu CX (2015) Surface-enhanced Raman scattering (SERS) study on rhodamine B adsorbed on different substrates. Russ J Phys Chem A 89:291–296. https://doi.org/10.1134/S0036024415020338CrossRef

65.

Borrero NFV, Filho JMCS, Eramkov VA, Marques FC (2019) Silver nanoparticles produced by laser ablation for a study on the effect of SERS with low laser power on N719 dye and Rhodamine-B. MRS Advances 4:1–9. https://doi.org/10.1557/adv.2019.157CrossRef

66.

Liu HM, Zhang XP, Zhai TR, Sander T, Klar PJ (2014) Centimeter-scale-homogeneous SERS substrates with seven-order global enhancement through thermally controlled plasmonic nanostructures. Nanoscale 6:5099–5105. https://doi.org/10.1039/c4nr00161cCrossRef

67.

Emory SR, Haskins WE, Nie S (1998) Direct observation of size-dependent optical enhancement in single metal nanoparticles. J Am Chem Soc 120:8009–8010. https://doi.org/10.1021/ja9815677CrossRef

68.

Krug JT, Wang GD, Emory SR, Nie S (1999) Efficient Raman enhancement and intermittent light emission observed in single gold nanocrystals. J Am Chem Soc 121:9208–9214. https://doi.org/10.1021/ja992058nCrossRef

Titel: Effect of laser intensity distribution period on the silver micro-stripes by laser interference induced forward transfer technology and their SERS property
verfasst von: Huijuan Shen
Yaode Wang
Lu Wang
Shenzhi Wang
Ri Liu
Xueying Chu
Jingran Zhang
Changli Li
Zhankun Weng
Zuobin Wang
Publikationsdatum: 01.12.2022
Verlag: Springer Netherlands
Erschienen in: Journal of Nanoparticle Research / Ausgabe 12/2022
Print ISSN: 1388-0764
Elektronische ISSN: 1572-896X
DOI: https://doi.org/10.1007/s11051-022-05590-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2022

Fabrication of PEGylated liposome in microfluidic flow process using supercritical CO2

Modeling the lattice expansion and contraction of nanocrystals in different interface environments

Influence of different polymers on photoluminescence of colloidal ZnO nanocrystals

ZnO/reduced graphene oxide nanocomposite with synergic enhanced gas sensing performance for the effective detection of NO2 at room temperature

Therapeutic potential of human breast milk derived exosomes

Novel concept on in situ syntheses and investigation of photon energy effect on AgNP size with a custom build device for enhanced antimicrobial efficiency

Premium Partner

Marktübersichten