Skip to main content
Erschienen in: Journal of Materials Science: Materials in Electronics 4/2018

24.11.2017

Effect of plating time on structural properties of Ni-plating coating on Nylon 12 powders

verfasst von: Chengmei Gui, Chenguang Yao, Guisheng Yang

Erschienen in: Journal of Materials Science: Materials in Electronics | Ausgabe 4/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

In this work, the effects of plating time on structural properties of Ni-plating coating on Nylon 12 (PA12) powders modified with 3-amino-propyltriethoxysilane (KH550) solution were investigated systematically using scanning electron microscopy and X-ray diffraction. Results showed amine groups attached on surface of KH550-modified PA12 powders, which could adsorb Sn and Pd used as sensitizer and activator, respectively. The relative concentration of Sn and Pd on sensitized and activated PA12 surface were 0.15 and 0.04%. When the plating time increased from 1 to 60 min, the crystallinity of Ni-plating coating enhanced and Ni-particle deposited content increased from 3.8 to 28%. Moreover, the Ni-plating particles firstly showed discrete distribution on the PA12 surface, average Ni-particle size was little changed at about 0.18 μm, and then showed continuous distribution with the average size increased to 0.32 μm.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat K. Kim, H.B. Lee, H.K. Park et al., Easy deposition of Ag onto polystyrene beads for developing surface-enhanced-Raman-scattering-based molecular sensors. J. Colloid Interface Sci. 318, 195–201 (2008)CrossRef K. Kim, H.B. Lee, H.K. Park et al., Easy deposition of Ag onto polystyrene beads for developing surface-enhanced-Raman-scattering-based molecular sensors. J. Colloid Interface Sci. 318, 195–201 (2008)CrossRef
2.
Zurück zum Zitat I. Krupa, G. Miková, I. Novák et al., Electrically conductive composites of polyethylene filled with polyamide particles coated with silver. Eur. Polym. J. 43, 2401–2413 (2007)CrossRef I. Krupa, G. Miková, I. Novák et al., Electrically conductive composites of polyethylene filled with polyamide particles coated with silver. Eur. Polym. J. 43, 2401–2413 (2007)CrossRef
3.
Zurück zum Zitat Z.M. Gao, S. Zhao, Y. Wang et al., Corrosion behavior and wear resistance characteristics of electroless Ni–P–CNTs plating on carbon steel. Int. J. Electrochem. Sci. 10, 637–648 (2015) Z.M. Gao, S. Zhao, Y. Wang et al., Corrosion behavior and wear resistance characteristics of electroless Ni–P–CNTs plating on carbon steel. Int. J. Electrochem. Sci. 10, 637–648 (2015)
4.
Zurück zum Zitat R. Muraliraja, D. Sendilkumar, R. Elansezhian, Prediction and supplementation of reducing agent to improve the coating efficiency and wear behavior of electroless Ni–P plating. Int. J. Electrochem. Sci. 10, 5536–5547 (2015) R. Muraliraja, D. Sendilkumar, R. Elansezhian, Prediction and supplementation of reducing agent to improve the coating efficiency and wear behavior of electroless Ni–P plating. Int. J. Electrochem. Sci. 10, 5536–5547 (2015)
5.
Zurück zum Zitat J. Zhang, H. Liu, Z. Wang et al., A solvent-assisted route for coating polystyrene colloids with Ag and the corresponding hollow Ag spheres. Mater. Lett. 61, 4579–4582 (2007)CrossRef J. Zhang, H. Liu, Z. Wang et al., A solvent-assisted route for coating polystyrene colloids with Ag and the corresponding hollow Ag spheres. Mater. Lett. 61, 4579–4582 (2007)CrossRef
6.
Zurück zum Zitat J. Zhang, T. Qiu, H. Yuan et al., Synthesis and characterization of novel Ag-polypyrrole/poly(styrene-co-methacrylic acid) nanocomposite particles. Mater. Lett. 65, 790–792 (2011)CrossRef J. Zhang, T. Qiu, H. Yuan et al., Synthesis and characterization of novel Ag-polypyrrole/poly(styrene-co-methacrylic acid) nanocomposite particles. Mater. Lett. 65, 790–792 (2011)CrossRef
7.
Zurück zum Zitat D. Song, J. Zhou, W. Jiang et al., A novel activation for electroless plating on preparing Ni/PS microspheres. Mater. Lett. 63, 282–284 (2009)CrossRef D. Song, J. Zhou, W. Jiang et al., A novel activation for electroless plating on preparing Ni/PS microspheres. Mater. Lett. 63, 282–284 (2009)CrossRef
8.
Zurück zum Zitat W. Li, T. Qiu, L. Wang et al., Preparation and electromagnetic properties of core/shell polystyrene-polypyrrole-nickel composite microspheres. ACS Appl. Mater. Interfaces 5, 883–891 (2012)CrossRef W. Li, T. Qiu, L. Wang et al., Preparation and electromagnetic properties of core/shell polystyrene-polypyrrole-nickel composite microspheres. ACS Appl. Mater. Interfaces 5, 883–891 (2012)CrossRef
9.
Zurück zum Zitat Y. Tai, C. Xu, H. Chen, Silver-coated glass fabric composites prepared by electroless plating. Mater. Lett. 180, 144–147 (2016)CrossRef Y. Tai, C. Xu, H. Chen, Silver-coated glass fabric composites prepared by electroless plating. Mater. Lett. 180, 144–147 (2016)CrossRef
10.
Zurück zum Zitat C. Yen, Studies on the preparation and properties of conductive polymers. XI. Metallized polymer films by plating out. J. Appl. Polym. Sci. 71, 1361–1365 (1999)CrossRef C. Yen, Studies on the preparation and properties of conductive polymers. XI. Metallized polymer films by plating out. J. Appl. Polym. Sci. 71, 1361–1365 (1999)CrossRef
11.
Zurück zum Zitat R.H. Guo, S.Q. Jiang, C.W.M. Yuen et al., Effect of copper content on the properties of Ni–Cu–P plated polyester fabric. J. Appl. Electrochem. 39, 907–912 (2009)CrossRef R.H. Guo, S.Q. Jiang, C.W.M. Yuen et al., Effect of copper content on the properties of Ni–Cu–P plated polyester fabric. J. Appl. Electrochem. 39, 907–912 (2009)CrossRef
12.
Zurück zum Zitat B.N. Hu, R.X. Sun, G. Yu et al., Effect of bath pH and stabilizer on electroless nickel plating of magnesium alloys. Surf. Coat. Technol. 228, 84–91 (2013)CrossRef B.N. Hu, R.X. Sun, G. Yu et al., Effect of bath pH and stabilizer on electroless nickel plating of magnesium alloys. Surf. Coat. Technol. 228, 84–91 (2013)CrossRef
13.
Zurück zum Zitat Z.P. Sun, J.J. Huang, L.B. Wang et al., Method for electroless nickel plating on poly(ethylene terephthalate) substrate modified with primer and self-assembled monolayer. J. Mater. Sci.: Mater. Electron. 26, 10132–10137 (2015) Z.P. Sun, J.J. Huang, L.B. Wang et al., Method for electroless nickel plating on poly(ethylene terephthalate) substrate modified with primer and self-assembled monolayer. J. Mater. Sci.: Mater. Electron. 26, 10132–10137 (2015)
14.
Zurück zum Zitat Y. Chang, Y. Tao, Q. Zhang et al., Selective adsorption of catalyst and copper plating for additive fabrication of conductive patterns and through-holes. Electrochim. Acta 158, 7–12 (2015)CrossRef Y. Chang, Y. Tao, Q. Zhang et al., Selective adsorption of catalyst and copper plating for additive fabrication of conductive patterns and through-holes. Electrochim. Acta 158, 7–12 (2015)CrossRef
15.
Zurück zum Zitat Z.P. Sun, J.J. Huang, Q. Liu et al., Effects of temperature on Ni coating on poly(ethylene terephthalate) substrate modified with primer. J. Mater. Sci.: Mater. Electron. 27, 5892–5898 (2016) Z.P. Sun, J.J. Huang, Q. Liu et al., Effects of temperature on Ni coating on poly(ethylene terephthalate) substrate modified with primer. J. Mater. Sci.: Mater. Electron. 27, 5892–5898 (2016)
16.
Zurück zum Zitat J.J. Huang, Y.H. Zeng, R.Q. Tan et al., Effects of substrate temperature on structural and electrical properties of SiO2-matrix boron-doped silicon nanocrystal thin films. Appl. Surf. Sci. 270, 428–431 (2013)CrossRef J.J. Huang, Y.H. Zeng, R.Q. Tan et al., Effects of substrate temperature on structural and electrical properties of SiO2-matrix boron-doped silicon nanocrystal thin films. Appl. Surf. Sci. 270, 428–431 (2013)CrossRef
17.
Zurück zum Zitat J.Y. Choi, T.J. Kim, S. Lee et al., Drop-on-demand printing of conductive ink by electrostatic field induced inkjet head. Appl. Phys. Lett. 93, 193508 (2008)CrossRef J.Y. Choi, T.J. Kim, S. Lee et al., Drop-on-demand printing of conductive ink by electrostatic field induced inkjet head. Appl. Phys. Lett. 93, 193508 (2008)CrossRef
18.
Zurück zum Zitat Y.S. Shi, J.S. Yang, C.Z. Yan et al., An organically modified montmorillonite/nylon-12 composite powder for selective laser sintering. Rapid Prototyp. J. 17, 28–36 (2011)CrossRef Y.S. Shi, J.S. Yang, C.Z. Yan et al., An organically modified montmorillonite/nylon-12 composite powder for selective laser sintering. Rapid Prototyp. J. 17, 28–36 (2011)CrossRef
Metadaten
Titel
Effect of plating time on structural properties of Ni-plating coating on Nylon 12 powders
verfasst von
Chengmei Gui
Chenguang Yao
Guisheng Yang
Publikationsdatum
24.11.2017
Verlag
Springer US
Erschienen in
Journal of Materials Science: Materials in Electronics / Ausgabe 4/2018
Print ISSN: 0957-4522
Elektronische ISSN: 1573-482X
DOI
https://doi.org/10.1007/s10854-017-8263-x

Weitere Artikel der Ausgabe 4/2018

Journal of Materials Science: Materials in Electronics 4/2018 Zur Ausgabe

Neuer Inhalt