nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.04.2015

Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of X52 Linepipe HFIW Joints

verfasst von: A. Kavousi Sisi, S. E. Mirsalehi

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 4/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the present paper, influences of normalization heat treatment on microstructural and mechanical properties of high-frequency induction welded (HFIW) joints of X52 steel have been investigated. HFIW joints were post-weld heat treated at different times and temperatures. The microstructure and mechanical properties of the heat treated joints were then comprehensively investigated. Based on the results, a proper normalization of the primary fine grain steel caused the grain size to increase; but because of converting brittle microstructure into ductile microstructure, it caused the toughness to increase also. In addition, the ductility of the joints was enhanced. Nevertheless, tensile strength, yield strength, and hardness were reduced. The results showed that 950 °C was the optimum normalization temperature from the standpoint of fracture toughness for the X52 steel joints. At 1050 °C, the carbides and/or nitrides in the steel dissolved, and excessive grain growth occurred. Hence, the maximum allowable temperature for normalization was found to be 1000 °C.

Vorheriger Artikel The Effect of Zirconium Addition on the Oxidation Resistance of Aluminide Coatings

Nächster Artikel Towards a Better Corrosion Resistance and Biocompatibility Improvement of Nitinol Medical Devices

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

ASM International Handbook Committee, Welding, Brazing, and Soldering. 10th ed. Vol. 6. 1993, ASM International, Materials Park, p 1315.

H.N.U. Chairman, High-Frequency welding, Welding Handbook, 1997, American Welding Society, p 652–662.

Ö.E. Güngör, P. Thibaux, M. Liebeherr, H.K.D.H. Bhadeshia, and P. Yan, Investigation into Microstructure—Toughness Relation in High Frequency Induction Welded Pipes. Asme, 2010, p 1–9.

M. Çöl and M. Yılmaz, The Determination of Heat Treatment Parameters of X52 Microalloyed Steel After High Frequency Induction Welding, Mater. Des., 2006, 27(6), p 507–512CrossRef

Z.Y. Liu, C.W. Du, C. Li, F.M. Wang, and X.G. Li, Stress Corrosion Cracking of Welded API, X70 Pipeline Steel in Simulated Underground Water, J. Mater. Eng. Perform., 2013, 22(9), p 2550–2556CrossRef

H. Pisarski, Assessment of Flaws in Pipeline Girth Welds—A Critical Review, Weld. World, 2013, 57(6), p 933–945CrossRef

ASM International Handbook Committee, Properties and Selection: Irons, Steels, and High-Performance Alloys. 10th ed. Vol. 1. 1993, ASM International, Materials Park, p 2521.

A. Zaky, Determinations of the Non-Recrystallization Temperature for X52 Steel Produced by Compact Slab Process Combined with Direct Hot rolling, J. Mater. Eng. Perform., 2006, 15(6), p 651–655CrossRef

J. Nieto, T. Elías, G. López, G. Campos, F. López, R. Garcia, and A. De, Effective Process Design for the Production of HIC-Resistant Linepipe Steels, J. Mater. Eng. Perform., 2013, 22(9), p 2493–2499CrossRef

10.

P. Yan, Ö.E. Guüngör, P. Thibaux, and H.K.D.H. Bhadeshia, Induction Welding and Heat Treatment of Steel Pipes: Evolution Of Crystallographic Texture Detrimental to Toughness, Sci. Technol. Weld. Join., 2010, 15(2), p 137–141CrossRef

11.

P. Yan, Ö.E. Güngör, P. Thibaux, M. Liebeherr, and H.K.D.H. Bhadeshia, Tackling the Toughness of Steel Pipes Produced by High Frequency Induction Welding and Heat-Treatment, Mater. Sci. Eng. A, 2011, 528(29–30), p 8492–8499CrossRef

12.

A. Gorni, Steel Forming and Heat Treating Handbook, 2013, São Vicente, Brazil, p 165

13.

ASM International Handbook Committee, Heat Treating. 10th ed. Vol. 4. 1991, ASM International, Materials Park, p 2173.

14.

API, Specification For Line Pipe, in 5L. 2007. p 31.

15.

C. Garcıá de Andrés, M.J. Bartolomé, C. Capdevila, D. San Martıń, F.G. Caballero, and V. López, Metallographic Techniques for the Determination of the Austenite Grain Size in Medium-Carbon Microalloyed Steels. Mater. Charact., 2001, 46(5), p 389–398.

16.

P. Liu, F.-G. Lu, X. Liu, and Y.-L. Gao, Metallographic Etching and Microstructure Characterization of NiCrMoV Rotor Steels for Nuclear Power, Int. J. Miner. Metall. Mater., 2013, 20(12), p 1164–1169CrossRef

17.

J. Reiter, C. Bernhard, and H. Presslinger, Austenite Grain Size in the Continuous Casting Process: Metallographic Methods and Evaluation, Mater. Charact., 2008, 59(6), p 737–746CrossRef

18.

H.-S. Yang and H.K.D.H. Bhadeshia, Austenite Grain Size and the Martensite-Start Temperature, Scripta Mater., 2009, 60(7), p 493–495CrossRef

19.

ASTM, Standard Test Methods for Determining Average Grain Size, E112. 2004, p 1–26.

20.

R. Abbaschian, L. Abbaschian, and R.E. Reed-Hill, Physical Metallurgy Principles, 4th ed. H. Gowance, Ed., 2009, CENGAGE Lerning, Canada.

21.

K. Wang, A Study of HSLA Steels Microalloyed with Vanadium and Titanium During Simulated Controlled Rolling Cycles, Mechanical Engineering, 2003, Canterbury, p 109–111.

22.

Yan, P., High Frequency Induction Welding and Post-Welding Heat Treatment of Steel Pipes, Materials Science and Metallurgy, 2011, Cambridge, p 1–143.

23.

D.T. Zhang, Z.X. Qiao, Y.C. Liu, J. Huo, Y. Chen, and Z.S. Yan, Effect of Austenisation Temperature on Phase Transformation in Low Carbon Microalloyed Pipeline Steel, Mater. Res. Innov., 2013, 17(Supplement 1), p 200–204CrossRef

Titel: Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of X52 Linepipe HFIW Joints
verfasst von: A. Kavousi Sisi
S. E. Mirsalehi
Publikationsdatum: 01.04.2015
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 4/2015
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-015-1423-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2015

Novel Hybrid Ablative/Ceramic Layered Composite for Earth Re-entry Thermal Protection: Microstructural and Mechanical Performance

Thermomechanical Modeling of Stress Relaxation in Shape Memory Alloy Wires

Microstructure and Properties of DCP-Derived W-ZrC Composite Using Nontoxic Sodium Alginate to Fabricate WC Preform

Finite Element Analysis of Plastic Deformation During Impression Creep

Erosion Characteristics of Nanoparticle-Reinforced Polyurethane Coatings on Stainless Steel Substrate

Inhibitive Performance of Monoethylene Glycol on CO2 Corrosion of API 5L X52 Steel

Premium Partner

Marktübersichten