Skip to main content
main-content

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

Erschienen in: Physics of Metals and Metallography 13/2021

18.08.2021 | STRENGTH AND PLASTICITY

Effect of Rotation Speed on Performance of Friction Stir Welded Spray-Formed 7055 Aluminum Alloy

verfasst von: Yumo Jiang, Yong Zhao, Zhixia Zhao, Shengchong Ma, Keng Yan

Erschienen in: Physics of Metals and Metallography | Ausgabe 13/2021

Einloggen, um Zugang zu erhalten
share
TEILEN

Abstract

Ultra-high-strength spray-formed 7055 aluminum alloy was welded at different rotation speeds with a constant welding speed of 175 mm/min by friction stir welding, the aim of which was to assess the effects of rotation speed on the microstructure, properties, and phase evolution of the joint. In addition, the effects of strengthening phase distribution on the joint properties were also evaluated.
Literatur
1.
Zurück zum Zitat M. M. Sharma, M. F. Amateau, and T. J. Eden, “Mesoscopic structure control of spray formed high strength Al–Zn–Mg–Cu alloys,” Acta Mater. 53 (10), 2919–2924 (2015). CrossRef M. M. Sharma, M. F. Amateau, and T. J. Eden, “Mesoscopic structure control of spray formed high strength Al–Zn–Mg–Cu alloys,” Acta Mater. 53 (10), 2919–2924 (2015). CrossRef
2.
Zurück zum Zitat M. A. Milyaev, N. S. Bannikova, L. I. Naumova, V. V. Proglyado, E. I. Patrakov, I. Yu. Kamenskii, and V. V. Ustinov, “Magnetoresistance of CoFeNi/Cu superlattices differing in the ferromagnetic alloy composition,” Phys. Met. Metallogr. 120 (9), 831–837 (2019). CrossRef M. A. Milyaev, N. S. Bannikova, L. I. Naumova, V. V. Proglyado, E. I. Patrakov, I. Yu. Kamenskii, and V. V. Ustinov, “Magnetoresistance of CoFeNi/Cu superlattices differing in the ferromagnetic alloy composition,” Phys. Met. Metallogr. 120 (9), 831–837 (2019). CrossRef
3.
Zurück zum Zitat F. Fadaeifard, M. R. Pakmanesh, M. Sh. Esfahani, K. A. Matori, and D. Chicot, “Nanoindentation analysis of friction stir welded 6061-T6 Al alloy in as-weld and post weld heat treatment,” Phys Met. Metallogr. 120 (5), 483–491 (2019). CrossRef F. Fadaeifard, M. R. Pakmanesh, M. Sh. Esfahani, K. A. Matori, and D. Chicot, “Nanoindentation analysis of friction stir welded 6061-T6 Al alloy in as-weld and post weld heat treatment,” Phys Met. Metallogr. 120 (5), 483–491 (2019). CrossRef
4.
Zurück zum Zitat A. Shailesh Rao and N. Yuvaraja, “Comparison of appearance, microstructure and tensile properties during friction stir welding processes of Al–Si alloys,” Phys. Met. Metallogr. 118 (7), 716–722 (2017). CrossRef A. Shailesh Rao and N. Yuvaraja, “Comparison of appearance, microstructure and tensile properties during friction stir welding processes of Al–Si alloys,” Phys. Met. Metallogr. 118 (7), 716–722 (2017). CrossRef
5.
Zurück zum Zitat M. M. Sharma, M. F. Amateau, and T. J. Eden, “Fatigue behavior of SiC particulate reinforced spray-formed 7XXX series Al-alloys,” Mater. Des. 32 (8–9), 4304–4309 (2011). CrossRef M. M. Sharma, M. F. Amateau, and T. J. Eden, “Fatigue behavior of SiC particulate reinforced spray-formed 7XXX series Al-alloys,” Mater. Des. 32 (8–9), 4304–4309 (2011). CrossRef
6.
Zurück zum Zitat Y. Jiang, Y. Zhao, Z. Zhao, K. Yan, L. Ren, and C. Du, “The strengthening mechanism of FSWed spray formed 7055 aluminum alloy under water mist cooling condition,” Mater. Charact. 162, 110185 (2020). CrossRef Y. Jiang, Y. Zhao, Z. Zhao, K. Yan, L. Ren, and C. Du, “The strengthening mechanism of FSWed spray formed 7055 aluminum alloy under water mist cooling condition,” Mater. Charact. 162, 110185 (2020). CrossRef
7.
Zurück zum Zitat S. Ma, Y. Zhao, J. Pu, et al., “Effect of welding speed on performance of friction stir welded spray forming 7055 aluminum alloy,” J. Manuf. Process. 46, 304–316 (2019). CrossRef S. Ma, Y. Zhao, J. Pu, et al., “Effect of welding speed on performance of friction stir welded spray forming 7055 aluminum alloy,” J. Manuf. Process. 46, 304–316 (2019). CrossRef
8.
Zurück zum Zitat A. H. Feng, D. L. Chen, Z. Y. Ma, W. Y. Ma, and R. J. Song “Microstructure and strain hardening of a friction stir welded high-strength Al–Zn–Mg alloy,” Acta Metall. Sin. 27 (4), 723–729 (2014). CrossRef A. H. Feng, D. L. Chen, Z. Y. Ma, W. Y. Ma, and R. J. Song “Microstructure and strain hardening of a friction stir welded high-strength Al–Zn–Mg alloy,” Acta Metall. Sin. 27 (4), 723–729 (2014). CrossRef
9.
Zurück zum Zitat W. Xu, Z. Li, and X. Sun, “Effect of welding speed on mechanical properties and the strain-hardening behavior of friction stir welded 7075 aluminum alloy joints,” J. Mater. Eng. Perform. 26 (4), 1938–1946 (2017). CrossRef W. Xu, Z. Li, and X. Sun, “Effect of welding speed on mechanical properties and the strain-hardening behavior of friction stir welded 7075 aluminum alloy joints,” J. Mater. Eng. Perform. 26 (4), 1938–1946 (2017). CrossRef
10.
Zurück zum Zitat C. Zhang, G. Huang, Y. Cao, Y. Zhu, and Q. Liu, “On the microstructure and mechanical properties of similar and dissimilar AA7075 and AA2024 friction stir welding joints: Effect of rotational speed,” J. Manuf. Process. 37, 470–487 (2019). CrossRef C. Zhang, G. Huang, Y. Cao, Y. Zhu, and Q. Liu, “On the microstructure and mechanical properties of similar and dissimilar AA7075 and AA2024 friction stir welding joints: Effect of rotational speed,” J. Manuf. Process. 37, 470–487 (2019). CrossRef
11.
Zurück zum Zitat Q. Wang, Z. Zhao, Y. Zhao, K. Yan, et al., “The adjustment strategy of welding parameters for spray formed 7055 aluminum alloy underwater friction stir welding joint,” Mater. Des. 88, 1366–1376 (2015). CrossRef Q. Wang, Z. Zhao, Y. Zhao, K. Yan, et al., “The adjustment strategy of welding parameters for spray formed 7055 aluminum alloy underwater friction stir welding joint,” Mater. Des. 88, 1366–1376 (2015). CrossRef
12.
Zurück zum Zitat F. Zhang, X. Su, Z. Chen, and Z. Nie, “Effect of welding parameters on microstructure and mechanical properties of friction stir welded joints of a super high strength Al–Zn–Mg–Cu aluminum alloy,” Mater. Des. 67, 483–491 (2015). CrossRef F. Zhang, X. Su, Z. Chen, and Z. Nie, “Effect of welding parameters on microstructure and mechanical properties of friction stir welded joints of a super high strength Al–Zn–Mg–Cu aluminum alloy,” Mater. Des. 67, 483–491 (2015). CrossRef
13.
Zurück zum Zitat Q. Wang, Y. Zhao, K. Yan, et al., “Corrosion behavior of spray formed 7055 aluminum alloy joint welded by underwater friction stir welding,” Mater. Des. 685, 97–103 (2015). CrossRef Q. Wang, Y. Zhao, K. Yan, et al., “Corrosion behavior of spray formed 7055 aluminum alloy joint welded by underwater friction stir welding,” Mater. Des. 685, 97–103 (2015). CrossRef
14.
Zurück zum Zitat Y. Zhao, Q. Wang, K. Yan, et al., “Microstructure and mechanical properties of spray formed 7055 aluminum alloy by underwater friction stir welding,” Mater. Des. 56, 725–730 (2014). CrossRef Y. Zhao, Q. Wang, K. Yan, et al., “Microstructure and mechanical properties of spray formed 7055 aluminum alloy by underwater friction stir welding,” Mater. Des. 56, 725–730 (2014). CrossRef
Metadaten
Titel
Effect of Rotation Speed on Performance of Friction Stir Welded Spray-Formed 7055 Aluminum Alloy
verfasst von
Yumo Jiang
Yong Zhao
Zhixia Zhao
Shengchong Ma
Keng Yan
Publikationsdatum
18.08.2021
Verlag
Pleiades Publishing
Erschienen in
Physics of Metals and Metallography / Ausgabe 13/2021
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI
https://doi.org/10.1134/S0031918X21130068

Weitere Artikel der Ausgabe 13/2021

Physics of Metals and Metallography 13/2021 Zur Ausgabe