nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

26.06.2019 | ORIGINAL ARTICLE

Effect of selective laser melting process parameters on microstructure and mechanical properties of 316L stainless steel helical micro-diameter spring

verfasst von: Mingji Huang, Zongxin Zhang, Ping Chen

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 5-8/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The effects of process parameters on microstructure and mechanical properties of the 316L stainless steel helical micro-diameter spring (316L HMDS) fabricated by selective laser melting (SLM) were explored. By optimizing SLM process parameters, the near-full density (> 99%) SLM-316L HMDS can be manufactured. The SLM-316L HMDS exhibits typical layered morphology consisting of micron-sized melt pools and columnar grains whose growth orientations are consistent with the temperature gradient. Lower hatch space reduces the formation of voids, resulting in better density, elongation, and ultimate tensile strength of the SLM-316L HMDS. The form angle significantly affects the yield strength and ultimate tensile strength, and obvious dimples appear on the fracture surface, demonstrating toughness fracture. The experimental results establish the correlation between the process parameters of SLM and the microstructure and macro-mechanical properties of the SLM-316L HMDS.

Vorheriger Artikel Mode coupling chatter prediction and avoidance in robotic machining process

Nächster Artikel A methodology of setting module groups for the design of reconfigurable machine tools

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Zhou J, Wang S, Kang L, Chen T (2011) Design and modeling on stranded wires helical springs. Chin J Mech Eng-En 24(4):626–637. https://doi.org/10.3901/CJME.2011.04.626 CrossRef

de Aguiar RAA, Pereira JHI, de Souza CG, Pacheco PMCL, savi MA (2009) Shape memory alloy helical springs: modeling, simulation and experimental analysis. Mater Sci Forum 758:147–156. https://doi.org/10.4028/www.scientific.net/MSF.758.147 CrossRef

Kolesnikov AM (2018) Deformations of helical spring and cuboid into hollow cylinders. Meccanica 53(8):2161–2170. https://doi.org/10.1007/s11012-017-0805-z MathSciNetCrossRefMATH

Girchenko AA, Eremeyev VA, Altenbach H (2012) Interaction of a helical shell with a nonlinear viscous fluid. Int J Eng Sci 61:53–58. https://doi.org/10.1016/j.ijengsci.2012.06.009 CrossRefMATH

Candido de Sousa V, Sugino C, De Marqui Junior C, Erturk A (2018) Adaptive locally resonant metamaterials leveraging shape memory alloys. J Appl Phys 124:1–11. https://doi.org/10.1063/1.5031168 CrossRef

Babaee S, Viard N, Wang P, Fang NX, Bertoldi K (2016) Harnessing deformation to switch on and off the propagation of sound. Adv Mater 28:1631–1635. https://doi.org/10.1002/adma.201504469 CrossRef

Miranda G, Faria S, Bartolomeu F, Pinto E, Madeira S, Mateus A, Carreira P, Alves N, Silva FS, Carvalho O (2016) Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting. Mater Sci Eng A 657:43–56. https://doi.org/10.1016/j.msea.2016.01.028 CrossRef

Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williarms CB, Wang CCL, Shin YC, Zhang S, Zavattieri PD (2015) The status, challenges, and future of additive manufacturing in engineering. Comput Aided Des 69:65–69. https://doi.org/10.1016/j.cad.2015.04.001 CrossRef

Li R, Shi Y, Wang Z, Wang L, Liu J, Jing W (2010) Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting. Appl Surf Sci 256(13):4350–4356. https://doi.org/10.1016/j.apsusc.2010.02.030 CrossRef

10.

DebRoy T, Wei HL, Zuback JS, Mukherjee T, Elmer JW, Milewski JO, beese AM, Wilson-Heid A, De A, Zhang W (2018) Additive manufacturing of metallic components - process, structure and properties. Prog Mater Sci 92:112–224. https://doi.org/10.1016/j.pmatsci.2017.10.001 CrossRef

11.

Sutton AT, Kriewall CS, Leu MC, Newkirk JW (2017) Powder characterization techniques and effects of powder characteristics on part properties in powder-bed fusion processes. Virtual Phys Prototyping 12(1):3–29. https://doi.org/10.1080/17452759.2016.1250605 CrossRef

12.

Xu X, Mi G, Luo Y, Jiang P, Shao X, Wang C (2017) Morphologies, microstructures, and mechanical properties of samples produced using laser metal deposition with 316L stainless steel wire. Opt Lasers Eng 94:1–11. https://doi.org/10.1016/j.optlaseng.2017.02.008 CrossRef

13.

Liu YJ, Li SJ, Wang HJ, Hou WT, Hao YL, Yang R, Sercombe TB, Zhang LC (2016) Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting. Acta Mater 113:56–67. https://doi.org/10.1016/j.actamat.2016.04.029 CrossRef

14.

Mertens A, Reginster S, Paydas H, Contrepois Q, Dormal T, Lemaire O, Lecomte-Beckers J (2014) Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures. Powder Metall 57(3):184–190. https://doi.org/10.1179/1743290114Y.0000000092 CrossRef

15.

Zhou X, Liu X, Zhang D, Shen Z, Liu W (2015) Balling phenomena in selective laser melted tungsten. J Mater Process Technol 222:33–42. https://doi.org/10.1016/j.jmatprotec.2015.02.032 CrossRef

16.

Cherry JA, Davies HM, Mehmood S, Lavery NP, Brown SGR, Sienz J (2015) Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting. Int J Adv Manuf Technol 76:869–879. https://doi.org/10.1007/s00170-014-6297-2 CrossRef

17.

Li R, Liu J, Shi Y, Wang L, Jiang W (2012) Balling behavior of stainless steel and nickel powder during selective laser melting process. Int J Adv Manuf Technol 59:1025–1035. https://doi.org/10.1007/s00170-011-3566-1 CrossRef

18.

Liverani E, Toschi S, Ceschini L, Fortunato A (2017) Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel. J Mater Process Technol 249:255–263. https://doi.org/10.1016/j.jmatprotec.2017.05.042 CrossRef

19.

Gu D, Shen Y (2009) Balling phenomena in direct laser sintering of stainless steel powder: metallurgical mechanisms and control methods. Mater Des 30:2903–2910. https://doi.org/10.1016/j.matdes.2009.01.013 CrossRef

20.

Kong D, Ni X, Dong C, Zhang L, Man C, Yao J, Xiao K, Li X (2018) Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells. Electrochim Acta 276:293–303. https://doi.org/10.1016/j.electacta.2018.04.188 CrossRef

21.

Kong D, Dong C, Ni X, Zhang L, Yao J, Man C, Cheng X, Xiao K, Li X (2019) Mechanical properties and corrosion behavior of selective lasermelted 316L stainless steel after different heat treatment processes. J Mater Sci Technol 35:1499–1507. https://doi.org/10.1016/j.jmst.2019.03.003 CrossRef

22.

Sun Y, Moroz A, Alrbaey K (2014) Sliding wear characteristics and corrosion behaviour of selective laser melted 316L stainless steel. J Mater Eng Perform 23(2):518–526. https://doi.org/10.1007/s11665-013-0784-8 CrossRef

23.

Röttger A, Geenen K, Windmann M, Binner F, Theisen W (2016) Comparison of microstructure and mechanical properties of 316L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material. Mater Sci Eng A 678:365–376. https://doi.org/10.1016/j.msea.2016.10.012 CrossRef

24.

Andani MT, Karamooz-Ravari MR, Mirzaeifar R, Ni J (2018) Micromechanics modeling of metallic alloys 3D printed by selective laser melting. Mater Des 137:204–213. https://doi.org/10.1016/j.matdes.2017.10.026 CrossRef

25.

Wang Z, Denlinger E, Michaleris P, Stoica AD, Dong M, Beese AM (2017) Residual stress mapping in Inconel 625 fabricated through additive manufacturing: method for neutron diffraction measurements to validate thermomechanical model predictions. Mater Des 113:169–177. https://doi.org/10.1016/j.matdes.2016.10.003 CrossRef

26.

Yadollahi A, Shamsaei N, Thompson SM, Seely DW (2015) Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel. Mater Sci Eng A 644:171–183. https://doi.org/10.1016/j.msea.2015.07.056 CrossRef

27.

Liu Y, Zhang J, Pang Z (2018) Numerical and experimental investigation into the subsequent thermal cycling during selective laser melting of multi-layer 316L stainless steel. Opt Laser Technol 98:23–32. https://doi.org/10.1016/j.optlastec.2017.07.034 CrossRef

28.

Yan C, Liang H, Hussein A, Young P, Rayment D (2014) Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting. Mater Des 55:533–541. https://doi.org/10.1016/j.matdes.2013.10.027 CrossRef

29.

Sing SL, Wiriaa FE, Yeong WY (2018) Selective laser melting of lattice structures: a statistical approach to manufacturability and mechanical behavior. Robot Cim-Int Manuf 49:170–180. https://doi.org/10.1016/j.rcim.2017.06.006 CrossRef

30.

Zaharia SM, Lancea C, Chicos LA, Pop MA, Caputo G, Serra E (2017) Mechanical properties and corrosion behavior of 316L stainless steel honeycomb cellular cores manufactured by selective laser melting. T Famena 41(4):11–24. https://doi.org/10.21278/TOF.41402 CrossRef

31.

Gümrük R, Mines RAW, Karadeniz S (2018) Determination of strain rate sensitivity of micro-struts manufactured using the selective laser melting method. J Mater Eng Perform 27(3):1016–1032. https://doi.org/10.1007/s11665-018-3208-y CrossRef

32.

Kong D, Ni X, Dong C, Zhang L, Man C, Cheng X, Li X (2019) Anisotropy in the microstructure and mechanical property for the bulk and porous 316L stainless steel fabricated via selective laser melting. Mater Lett 235:1–5. https://doi.org/10.1016/j.matlet.2018.09.152 CrossRef

33.

Won Y, kim A, Yang W, Jeong S, Moon J (2014) A highly stretchable, helical copper nanowire conductor exhibiting a stretchability of 700%. NPG Asia Mater 6(132):1–7. https://doi.org/10.1038/am.2014.88 CrossRef

34.

Suryawanshi J, Prashanth KG, Ramamurty U (2017) Mechanical behavior of selective laser melted 316L stainless steel. Mater Sci Eng A 696:113–121. https://doi.org/10.1016/j.msea.2017.04.058 CrossRef

35.

Simchi A (2006) Direct laser sintering of metal powders mechanism, kinetics and microstructural features. Mater Sci Eng A 428:148–158. https://doi.org/10.1016/j.msea.2006.04.117 CrossRef

36.

Tucho WM, Lysne VH, Austbø H, Sjolyst-Kverneland A, Hansen V (2018) Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L. J Alloys Compd 740:910–925. https://doi.org/10.1016/j.jallcom.2018.01.098 CrossRef

37.

Riemer A, Leuders S, Thöne M, Richard HA, Tröster T, Niendorf T (2014) On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting. Eng Fract Mech 120:15–25. https://doi.org/10.1016/j.engfracmech.2014.03.008 CrossRef

38.

Zhu Y, Lin G, Khonsari MM, Zhang J, Yang H (2018) Material characterization and lubricating behaviors of porous stainless steel fabricated by selective laser melting. J Mater Process Technol 262:41–52. https://doi.org/10.1016/j.jmatprotec.2018.06.027 CrossRef

39.

Wang D, Song C, Yang Y, Bai Y (2016) Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts. Mater Des 100:291–299. https://doi.org/10.1016/j.matdes.2016.03.111 CrossRef

40.

Zhuo Z, Xia S, Bai Q, Zhou B (2018) The effect of grain boundary character distribution on the mechanical properties at different strain rates of a 316L stainless steel. J Mater Sci 53:2844–2858. https://doi.org/10.1007/s10853-017-1695-0 CrossRef

41.

Kong D, Ni X, Dong C, Lei X, Liang Z, Cheng M, Yao J, Cheng X, Li X (2018) Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting. Mater Des 152:88–101. https://doi.org/10.1016/j.matdes.2018.04.058 CrossRef

Titel: Effect of selective laser melting process parameters on microstructure and mechanical properties of 316L stainless steel helical micro-diameter spring
verfasst von: Mingji Huang
Zongxin Zhang
Ping Chen
Publikationsdatum: 26.06.2019
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 5-8/2019
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-03928-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5-8/2019

Extending lean frontiers: a kaizen case study in an Italian MTO manufacturing company

Numerical study on the effect of thermal conduction on explosive welding interface

Multiple slit electrochemical micromachining using a single wire and a constant inter-electrode voltage

Ultrasonic on-machine scanning for thickness measurement of thin-walled parts: modeling and experiments

Numerical analysis of coolant flow in the grinding zone

A rapid method for grain growth of Ti6Al4V alloy and its machinability

Premium Partner

Marktübersichten