nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.12.2015

Effect of Viscosity Measurement Method to Simulate High Pressure Die Casting of Thin-Wall AlSi10MnMg Alloy Castings

verfasst von: B. W. Zhu, L. X. Li, X. Liu, L. Q. Zhang, R. Xu

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the present study, a rotating cylinder viscometer (RCV) was adopted to measure the viscosity of AlSi10MnMg aluminum alloy. The results show that the measured viscosity is much higher than previously reported viscosity of aluminum alloys measured by oscillation vessel viscometer. The viscosity measured by RCV was introduced into the simulation of the filling progress of high pressure die casting (HPDC) for thin-walled castings of aluminum alloy (TWCA). The simulated results match well with the experimental results indicating that the RCV is the most appropriate to use for simulations of HPDC for TWCA.

Vorheriger Artikel Study on Microstructure and Electrochemical Corrosion Behavior of PEO Coatings Formed on Aluminum Alloy

Nächster Artikel The Effect of SiC Particle Addition During FSW on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

W.M. Jiang, Z.T. Fan, D.J. Liu, D.F. Liao, X.P. Dong, and X.M. Zong, Correlation of Microstructure with Mechanical Properties and Fracture Behavior of A356-T6 Aluminum Alloy Fabricated by Expendable Pattern Shell Casting with Vacuum and Low-Pressure, Gravity Casting and Lost Foam, Mater. Sci. Eng. A, 2013, 560, p 396–403CrossRef

N. Chomsaeng, M. Haruta, T. Chairuangsri, H. Kurata, S. Isoda, and M. Shiojiri, HRTEM and ADF-STEM of Precipitates at Peak-Ageing in Cast A356 Aluminium Alloy, J. Alloy. Compd., 2012, 496, p 478–487CrossRef

K.R. Ravi, R.M. Pillai, K.R. Amaranathan, B.C. Pai, and M.J. Chakraborty, Fluidity of Aluminum Alloys and Composites: A Review, J. Alloy. Compd., 2008, 456, p 201–210CrossRef

L.H. Wang, P. Turnley, and G. Savage, Gas Content in High Pressure Die Casting, J. Mater. Process. Technol., 2011, 211, p 1510–1515CrossRef

M.A. Irfan, D. Schwam, A. Karva, and R. Ryder, Porosity Reduction and Mechanical Properties Improvement in Die Cast Engine Blocks, Mater. Sci. Eng. A, 2012, 535, p 108–114CrossRef

M. Okayasu, Y. Ohkura, S. Takeuchi, S. Takasu, H. Ohfuji, and T. Shiraishi, A Study of the Mechanical Properties of An Al-Si-Cu Alloy (ADC12) Produced by Various Casting Processes, Mater. Sci. Eng. A, 2012, 543, p 185–192CrossRef

S.H. Elahi, H. Adelnia, and H.R. Shahverdi, A Simple Accurate Method for Measuring Viscosity of Liquid Metal at High Temperatures, J. Rheol., 2012, 56, p 941–952CrossRef

A. Reikher and K.M. Pillai, A Fast Simulation of Transient Metal Flow and Solidification in a Narrow Channel. Part I. Model Validation and Parametric Study, Int. J. Heat Mass Transf., 2013, 60, p 797–805CrossRef

A.T. Dinsdale and P.N. Quested, The Viscosity of Aluminium and Its Alloys-A Review of Date and Modes, J. Mater. Sci., 2004, 39, p 7221–7228CrossRef

10.

V. Sklyarchuk, Y. Plevachuk, A. Yakymovych, S. Eckert, G. Gerbeth, and K. Eigenfeld, Structure Sensitive Properties of Liquid Al-Si Alloys, Int. J. Thermophys., 2009, 30, p 1400–1410CrossRef

11.

X.G. Song, X.F. Bian, J.X. Zhang, and J. Zhang, Temperature-Dependent Viscosities of Eutectic Al-Si Alloys Modified with Sr and P, J. Alloy. Compd., 2009, 479, p 670–673CrossRef

12.

M.M. Malik, M. Jeyakumar, M.S. Hamen, M.J. Walker, and S. Shankar, Rotational Rheometry of Liquid Metal System: Measurement Geometry Selection and Flow Curve Analysis, J. Nonnewton. Fluid Mech., 2010, 165, p 733–742CrossRef

13.

W. Liu, S.M. Xing, and P.W. Bao, Energy Dissipation and Apparent Viscosity of Semi-solid Metal during Rheological Processes-Part I: Energy Dissipation, J. Mater. Sci. Technol., 2007, 23(6), p 011–021

14.

G.R. Li, R.L. Chen, Y.T. Zhao, H.M. Wang, G. Chen, Q.X. Bai, and X.N. Cheng, Apparent Viscosity of In2situ Synthesized Particulate Reinforced Aluminum Matrix Composites, Spec. Cast. Nonferr. Alloys, 2008, 28(7), p 496–499 (in Chinese)

15.

W.Y. Liu, H. Lu, Y.H. Jiang, and R. Zhou, Steady Apparent Viscosity of Hypereutectic Al-Si Semi-solid Alloy Slurry, Spec. Cast. Nonferr. Alloys, 2007, 27(2), p 113–115 (in Chinese)

16.

Y.Y. He, Q.C. Liu, J. Yang, B.N. Yang, M.H. Long, H.M. Zheng, C.W. Liu, and M. Wei, Influence of Si, Ti Content on Fluidity of Hot Metal, Adv. Mater. Res., 2010, 146–147, p 1911–1916CrossRef

17.

Q.Y. Han and H.B. Xu, Fluidity of Alloys Under High Pressure Die Casting Conditions, Scr. Mater., 2005, 53, p 7–10CrossRef

18.

B.W. Zhu, L.X. Li, X. Liu, L.Q. Zhang, R. Xu, and X.B. Bu, Heat Transfer Behaviors Between Metal and Die During Filling Process of Thin-Wall Aluminum Alloy Under High Pressure Die Casting Conditions, Chin. J. Nonferr. Metals, 2013, 23(11), p 3031–3038 (in Chinese)

19.

Y. Qi, T. Cagin, Y. Kimura, and W.A. Goddard, III, Viscosities of Liquid Metal Alloys from Nonequilibrium Molecular Dynamics, J. Comput. Aided Mater. Design, 2001, 8, p 233–243CrossRef

20.

M.D. Sabatino, L. Arnberg, S. Rorvik, and A. Prestmo, The Influence of Oxide Inclusions on the Fluidity of Al-7wt%Si Alloy, Mater. Sci. Eng., A, 2005, 413–414, p 272–276CrossRef

21.

A. Kolsgaard and S. Brusethaug, Fluidity of Aluminium alloy AlSi7Mg-SiC Particulate Composite Melts, Mater. Sci. Technol., 1994, 10(6), p 545–551CrossRef

22.

K.L. Sahoo and C.S. Sivaramakrishnan, Some Studies on Al-8.3Fe-0.8V-0.9Si Alloy for Near Net Shape Casting, J. Mater. Process. Technol., 2003, 135, p 253–275CrossRef

Titel: Effect of Viscosity Measurement Method to Simulate High Pressure Die Casting of Thin-Wall AlSi10MnMg Alloy Castings
verfasst von: B. W. Zhu
L. X. Li
X. Liu
L. Q. Zhang
R. Xu
Publikationsdatum: 01.12.2015
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2015
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-015-1783-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2015

Characterization of Time-Dependent Behavior of Ramming Paste Used in an Aluminum Electrolysis Cell

Corrosion Behavior of Sintered NdFeB Magnets Coated with Ni Coatings Deposited by Ion Beam Sputtering

Hot Tensile Behavior and Self-consistent Constitutive Modeling of TA15 Titanium Alloy Sheets

A DNA-Assembled Fe3O4@Ag Nanorod in Silica Matrix for Cholesterol Biosensing

The Numerical and Experimental Investigation of the Multi-layer Laser-MIG Hybrid Welding for Fe36Ni Invar Alloy

Electroless Ni-P/SiC Nanocomposite Coatings With Small Amounts of SiC Nanoparticles for Superior Corrosion Resistance and Hardness

Premium Partner

Marktübersichten