Skip to main content
Erschienen in: Advances in Manufacturing 4/2019

12.10.2019

Effect of weld faying part groove shape on reduction of inner flash in steel pipe joints fabricated by friction welding

verfasst von: M. Kimura, S. Iwamoto, M. Kusaka, K. Kaizu, Y. Nakatani, M. Takahashi

Erschienen in: Advances in Manufacturing | Ausgabe 4/2019

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The groove shape of the weld faying part was investigated to obtain an ideal pipe friction-welded joint that had a fracture in the base metal and no inner flash of it. The steel pipe had inner and outer diameters of 8.0 mm and 13.5 mm, respectively, and the weld faying surface was of a basic flat shape (butt) type. Moreover, stepped and tapered groove shapes were prepared. Pipe groove shapes were welded with a friction speed of 27.5 s−1 and a friction load of 2.79 kN. Joining phenomena during the welding process were observed, and the tensile strength of joints was evaluated. The joints, that fabricated with flat or step groove shapes, made with a friction time at which the friction torque reached the initial peak did not have the tensile strength of the base metal nor a fracture in the base metal. However, the joints fabricated with a friction time that reached past the initial peak had a large flash, and they contained a fracture in the base metal. In contrast, when joints were made with a gently tapered groove shape with a friction time reaching the time of the initial peak, they achieved a fracture in the base metal, despite having an extremely small inner flash. Therefore, the shape at the weld faying part was capable of reducing the flash exhausted from the weld interface.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Mitani K, Matsui S, Matsumura H et al (1992) Effect of high frequency preheating on plasma welding speed for SUS304 tube. Q J Jpn Weld Soc 10(2):223–228CrossRef Mitani K, Matsui S, Matsumura H et al (1992) Effect of high frequency preheating on plasma welding speed for SUS304 tube. Q J Jpn Weld Soc 10(2):223–228CrossRef
2.
Zurück zum Zitat Asai S (1999) Current trends of arc welding in plant piping. J Jpn Weld Soc 68(8):601–606CrossRef Asai S (1999) Current trends of arc welding in plant piping. J Jpn Weld Soc 68(8):601–606CrossRef
3.
Zurück zum Zitat Teh LH, Rasmussen KJR (2007) Strength of arc-welded T-joints between equal width cold-formed RHS. J Const Steel Res 63(4):571–579CrossRef Teh LH, Rasmussen KJR (2007) Strength of arc-welded T-joints between equal width cold-formed RHS. J Const Steel Res 63(4):571–579CrossRef
4.
Zurück zum Zitat Wang KK (1975) Friction welding. Welding Res Counc Bull WRC Bull 204:1–21 Wang KK (1975) Friction welding. Welding Res Counc Bull WRC Bull 204:1–21
5.
Zurück zum Zitat Maalekian M (2007) Friction welding- critical assessment of literature. Sci Technol Weld Join 12(8):738–759CrossRef Maalekian M (2007) Friction welding- critical assessment of literature. Sci Technol Weld Join 12(8):738–759CrossRef
6.
Zurück zum Zitat Eberhard BJ, Jr Schaaf BW, Wilson AD (1983) Friction weld ductility and toughness as influenced by inclusion morphology. Weld J 62(7):171s–178s Eberhard BJ, Jr Schaaf BW, Wilson AD (1983) Friction weld ductility and toughness as influenced by inclusion morphology. Weld J 62(7):171s–178s
7.
Zurück zum Zitat Kumar MV, Balasubramanian V (2014) Microstructure and tensile properties of friction welded SUS 304HCu austenitic stainless steel tubes. Int J Press Ves Pip 113:25–31CrossRef Kumar MV, Balasubramanian V (2014) Microstructure and tensile properties of friction welded SUS 304HCu austenitic stainless steel tubes. Int J Press Ves Pip 113:25–31CrossRef
8.
Zurück zum Zitat Ogawa K, Nakayama H, Ohue Y et al (1988) Fatigue strength characteristics of S35C/S35C friction welded tubular butt joints. J Soc Mater Sci Jpn 37(421):1209–1215CrossRef Ogawa K, Nakayama H, Ohue Y et al (1988) Fatigue strength characteristics of S35C/S35C friction welded tubular butt joints. J Soc Mater Sci Jpn 37(421):1209–1215CrossRef
9.
Zurück zum Zitat Palanivel R, Laubscher RF, Dinaharan I (2017) An investigation into the effect of friction welding parameters on tensile strength of titanium tubes by utilizing an empirical relationship. Measurement 98:77–91CrossRef Palanivel R, Laubscher RF, Dinaharan I (2017) An investigation into the effect of friction welding parameters on tensile strength of titanium tubes by utilizing an empirical relationship. Measurement 98:77–91CrossRef
10.
Zurück zum Zitat Kawai G, Ogawa K, Tsujino R et al (1999) Statistical strength characteristics of aluminum alloy pipe and carbon steel pipe friction weld joints. J Jpn Soc Fract Strength Mater 33(1):1–10 Kawai G, Ogawa K, Tsujino R et al (1999) Statistical strength characteristics of aluminum alloy pipe and carbon steel pipe friction weld joints. J Jpn Soc Fract Strength Mater 33(1):1–10
11.
Zurück zum Zitat Ohkubo Y, Iwamura S, Hatta H (2007) Thermal analysis on friction welding of carbon steel tube and AA5154 aluminum tube. Sumitomo Light Met Techn Rep 48(1):27–32 Ohkubo Y, Iwamura S, Hatta H (2007) Thermal analysis on friction welding of carbon steel tube and AA5154 aluminum tube. Sumitomo Light Met Techn Rep 48(1):27–32
12.
Zurück zum Zitat Balta B, Arici AA, Yilmaz M (2016) Optimization of process parameters for friction weld steel tube to forging joints. Mater Des 103:209–222CrossRef Balta B, Arici AA, Yilmaz M (2016) Optimization of process parameters for friction weld steel tube to forging joints. Mater Des 103:209–222CrossRef
13.
Zurück zum Zitat Michalski R (1989) Utilisation of welding flash friction. Mater Des 10(5):262–263CrossRef Michalski R (1989) Utilisation of welding flash friction. Mater Des 10(5):262–263CrossRef
14.
Zurück zum Zitat Palanivel R, Laubscher RF, Dinaharan I et al (2017) Microstructure and mechanical characterization of continuous drive friction welded grade 2 seamless titanium tubes at different rotational speeds. Int J Press Ves Pip 154:17–28CrossRef Palanivel R, Laubscher RF, Dinaharan I et al (2017) Microstructure and mechanical characterization of continuous drive friction welded grade 2 seamless titanium tubes at different rotational speeds. Int J Press Ves Pip 154:17–28CrossRef
15.
Zurück zum Zitat Luo J, Ye YH, Xu JJ et al (2009) A new mixed-integrated approach to control welded flashes forming process of damping-tube-gland in continuous drive friction welding. Mater Des 30:353–358CrossRef Luo J, Ye YH, Xu JJ et al (2009) A new mixed-integrated approach to control welded flashes forming process of damping-tube-gland in continuous drive friction welding. Mater Des 30:353–358CrossRef
16.
Zurück zum Zitat Rovere CAD, Ribeiro CR, Silva R et al (2014) Local mechanical properties of radial friction welded supermartensitic stainless steel pipes. Mater Des 56:423–427CrossRef Rovere CAD, Ribeiro CR, Silva R et al (2014) Local mechanical properties of radial friction welded supermartensitic stainless steel pipes. Mater Des 56:423–427CrossRef
17.
Zurück zum Zitat Faes K, Dhooge A, de Baets P et al (2008) Influence of deceleration phase on properties of friction welded pipelines using intermediate ring. Sci Technol Weld Join 13(2):136–145CrossRef Faes K, Dhooge A, de Baets P et al (2008) Influence of deceleration phase on properties of friction welded pipelines using intermediate ring. Sci Technol Weld Join 13(2):136–145CrossRef
18.
Zurück zum Zitat Pissanti DR, Scheid A, Kanan LF et al (2019) Pipeline girth friction welding of the UNS S32205 duplex stainless steel. Mater Des 162:198–209CrossRef Pissanti DR, Scheid A, Kanan LF et al (2019) Pipeline girth friction welding of the UNS S32205 duplex stainless steel. Mater Des 162:198–209CrossRef
19.
Zurück zum Zitat Shi L, Song R, Tian X (2017) Plasma beam radius compensation-integrated torch path planning for CNC pipe hole cutting with welding groove. Int J Adv Manuf Technol 88(5/8):1971–1981CrossRef Shi L, Song R, Tian X (2017) Plasma beam radius compensation-integrated torch path planning for CNC pipe hole cutting with welding groove. Int J Adv Manuf Technol 88(5/8):1971–1981CrossRef
20.
Zurück zum Zitat Li X, Ma H, Shen Z (2015) Research on explosive welding of aluminum alloy to steel with dovetail grooves. Mater Des 87:815–824CrossRef Li X, Ma H, Shen Z (2015) Research on explosive welding of aluminum alloy to steel with dovetail grooves. Mater Des 87:815–824CrossRef
21.
Zurück zum Zitat Wan L, Huang Y (2018) Friction welding of AA6061 to AISI 316L steel: characteristic analysis and novel design equipment. Int J Adv Manuf Technol 95(9/12):4117–4128CrossRef Wan L, Huang Y (2018) Friction welding of AA6061 to AISI 316L steel: characteristic analysis and novel design equipment. Int J Adv Manuf Technol 95(9/12):4117–4128CrossRef
22.
Zurück zum Zitat Ashfaq M, Sajja N, Rafi HK et al (2013) Improving strength of stainless steel/aluminum alloy friction welds by modifying faying surface design. J Mater Eng Perform 22(2):376–383CrossRef Ashfaq M, Sajja N, Rafi HK et al (2013) Improving strength of stainless steel/aluminum alloy friction welds by modifying faying surface design. J Mater Eng Perform 22(2):376–383CrossRef
23.
Zurück zum Zitat Kimura M, Ichihara A, Kusaka M et al (2012) Joint properties and their improvement of AISI 310S austenitic stainless steel thin walled circular pipe friction welded joint. Mater Des 38:38–46CrossRef Kimura M, Ichihara A, Kusaka M et al (2012) Joint properties and their improvement of AISI 310S austenitic stainless steel thin walled circular pipe friction welded joint. Mater Des 38:38–46CrossRef
24.
Zurück zum Zitat Kimura M, Kusaka M, Kaizu K et al (2016) Friction welding technique and joint properties of thin-walled pipe friction welded joint between type 6063 aluminum alloy and AISI 304 austenitic stainless steel. Int J Adv Manuf Technol 82(1):489–499CrossRef Kimura M, Kusaka M, Kaizu K et al (2016) Friction welding technique and joint properties of thin-walled pipe friction welded joint between type 6063 aluminum alloy and AISI 304 austenitic stainless steel. Int J Adv Manuf Technol 82(1):489–499CrossRef
25.
Zurück zum Zitat Kimura M, Kusaka M, Seo K et al (2005) Effect of friction welding conditions and aging treatment on mechanical properties of A7075-T6 aluminium alloy friction joint. Sci Technol Weld Join 10(4):406–412CrossRef Kimura M, Kusaka M, Seo K et al (2005) Effect of friction welding conditions and aging treatment on mechanical properties of A7075-T6 aluminium alloy friction joint. Sci Technol Weld Join 10(4):406–412CrossRef
26.
Zurück zum Zitat Kimura M, Kusaka M, Seo K et al (2004) Properties of low carbon steel joint by low heat input friction welding method. In: Proceedings of 57th assy of international institute of welding (IIW), Osaka, Japan, pp 139–149 Kimura M, Kusaka M, Seo K et al (2004) Properties of low carbon steel joint by low heat input friction welding method. In: Proceedings of 57th assy of international institute of welding (IIW), Osaka, Japan, pp 139–149
27.
Zurück zum Zitat Kimura M, Ohtsuka Y, Kusaka M et al (2005) Effect of friction time and friction pressure on tensile strength of welded joint for medium and high carbon steels by low heat input friction welding method. Q J Jpn Weld Soc 23(4):577–586CrossRef Kimura M, Ohtsuka Y, Kusaka M et al (2005) Effect of friction time and friction pressure on tensile strength of welded joint for medium and high carbon steels by low heat input friction welding method. Q J Jpn Weld Soc 23(4):577–586CrossRef
28.
Zurück zum Zitat Saida K (2011) Principal of material joining and joining technology for metals. J Jpn Soc Prec Eng 77(3):273–277CrossRef Saida K (2011) Principal of material joining and joining technology for metals. J Jpn Soc Prec Eng 77(3):273–277CrossRef
29.
Zurück zum Zitat Kimura M, Kusaka M, Seo K et al (2002) Effect of various conditions on friction torque in the first phase of friction welding. Q J Jpn Weld Soc 20(3):432–438CrossRef Kimura M, Kusaka M, Seo K et al (2002) Effect of various conditions on friction torque in the first phase of friction welding. Q J Jpn Weld Soc 20(3):432–438CrossRef
30.
Zurück zum Zitat Kimura M, Kusaka M, Seo K et al (2005) Joining phenomena during friction stage of A7075-T6 aluminium alloy friction weld. Sci Technol Weld Join 10(3):378–383CrossRef Kimura M, Kusaka M, Seo K et al (2005) Joining phenomena during friction stage of A7075-T6 aluminium alloy friction weld. Sci Technol Weld Join 10(3):378–383CrossRef
31.
Zurück zum Zitat Kimura M, Kusaka M, Seo K et al (2002) Relationship between the friction time, friction torque, and joint properties of friction welding for the low heat input friction welding method. Q J Jpn Weld Soc 20(4):559–565CrossRef Kimura M, Kusaka M, Seo K et al (2002) Relationship between the friction time, friction torque, and joint properties of friction welding for the low heat input friction welding method. Q J Jpn Weld Soc 20(4):559–565CrossRef
32.
Zurück zum Zitat Miyashita S, Takahashi M, Kimura M (2016) Deformation analysis of friction welding of heat- resistant steels. In: Proceedings of 10th international conference on trends in welding research and 9th international welding symposium of Japan Welding Society, Tokyo, Japan, pp 830–833 Miyashita S, Takahashi M, Kimura M (2016) Deformation analysis of friction welding of heat- resistant steels. In: Proceedings of 10th international conference on trends in welding research and 9th international welding symposium of Japan Welding Society, Tokyo, Japan, pp 830–833
Metadaten
Titel
Effect of weld faying part groove shape on reduction of inner flash in steel pipe joints fabricated by friction welding
verfasst von
M. Kimura
S. Iwamoto
M. Kusaka
K. Kaizu
Y. Nakatani
M. Takahashi
Publikationsdatum
12.10.2019
Verlag
Shanghai University
Erschienen in
Advances in Manufacturing / Ausgabe 4/2019
Print ISSN: 2095-3127
Elektronische ISSN: 2195-3597
DOI
https://doi.org/10.1007/s40436-019-00274-1

Weitere Artikel der Ausgabe 4/2019

Advances in Manufacturing 4/2019 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.