nach oben

Journal of Materials Engineering and Performance

Erschienen in:

30.05.2018

Effect of Zener–Holloman Parameter on the Prior Austenite Grain size in a 12Cr-10Ni Precipitation-Hardenable Stainless Steel

verfasst von: C. R. Anoop, Aditya Prakash, S. V. S. Narayana Murty, Indradev Samajdar

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 7/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Hot isothermal plane strain compression (PSC) tests were carried out on a 12Cr-10Ni martensitic precipitation-hardenable (PH) stainless steel, in the temperature range of 750-1050 °C, to study microstructural evolution during large strain deformation. The nature of stress–strain curves varies with Zener–Holloman parameter (Z) with specimens deformed at high Z showing steady-state behavior and those deformed at lower Z showing flow softening. Prior austenite grain size (PAGS), d, exhibited a strong correlation to Z showing a bilinear behavior represented as: d = (1803.9)Z^−0.094 for high Z deformation and d = (1456.2)Z^−0.058 for low Z deformation. Based on the above study, it is recommended to thermomechanically process 12Cr-10Ni steel at Z ≥ 10²² for obtaining products with good strength–toughness balance.

Vorheriger Artikel An Analysis on the Constitutive Models for Forging of Ti6Al4V Alloy Considering the Softening Behavior

Nächster Artikel Effect of Ceramic Rolling and Annealing on Mechanical Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloys

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

R.K. Wilson, Ed., Maraging Steels: Recent Developments and Applications, The Minerals Metals & Materials Society, Pittsburgh, 1998, p 1–39

M.F. McGuire, Stainless Steels for Design Engineers, ASM International, Almere, 2008, p 137–146

Y.V.R.K. Prasad and S. Sasidhara, Hot Working Guide, ASM International, Almere, 2015, p 1–24

Y.V.R.K. Prasad and T. Seshacharyalu, Modelling of Hot Deformation for Microstructural Control, Int. Mater. Rev., 1998, 43, p 243–258CrossRef

S.V.S. Narayana Murty, B. Nageswara Rao, and B.P. Kashyap, Instability Criteria for Hot Deformation of Materials, Int. Mater. Rev., 2000, 45, p 15–26CrossRef

G.E. Dieter, H.A. Kuhn, and S.L. Semiatin, Ed., Handbook of Workability and Process Design, ASM International, Almere, 2003

G.E. Dieter, Mechanical Metallurgy, McGraw Hill, New York, 1986

S. Morito, H. Saito, T. Ogawa, T. Furuhara, and T. Maki, Effect of Austenite Grain size on the Morphology and Crystallography of Lath Martensite in Low Carbon Steels, ISIJ Int., 2005, 45, p 91–94CrossRef

M. Pietrzyk, J.G. Lenard, and G.M. Dalton, A Study of Plane Strain Compression Test, Ann. CIRP, 1993, 42, p 331–334CrossRef

10.

S.V.S. Narayana Murty, S. Torizuka, and K. Nagai, Microstructural Evolution During Simple Heavy Warm Compression of a Low Carbon Steel: Development of a Processing Map, Mater. Sci. Eng. A, 2005, 410–411, p 319–323CrossRef

11.

N. Nayan, N.P. Gurao, S.V.S. Narayana Murty, A.K. Jha, B. Pant, and K.M. George, Microstructure and Microtexture Evolution During Larges Strain Deformation of Inconel Alloy IN718, Mater. Charact., 2010, 110, p 236–241CrossRef

12.

N. Nayan, N.P. Gurao, S.V.S. Narayana Murty, A.K. Jha, B. Pant, and S.C. Sharma, Microstructure and Microtexture Evolution During Larges Strain Deformation of an Aluminium-Copper-Lithium Alloy AA2195, Mater. Des., 2015, 65, p 862–868CrossRef

13.

C. Boldetti, C. Pinna, and I.C. Howard, Measurement and Prediction of Deformation in Plane Strain Compression Tests of AA5182, Mater. Sci. Technol., 2006, 22, p 1380–1386CrossRef

14.

S.A. Aksenov, J. Kliber, Y.A. Puzino, and S.A. Bober, Processing of Plane Strain Compression Test Results for Investigation of AISI, 304 Stainless Steel Constitutive Behaviour, J. Chem. Technol. Metall., 2015, 50(6), p 644–650

15.

K. Pawlak, B. Białobrzeska, and Ł. Konat, The Influence of Austenitizing Temperature on Prior Austenite Grain Size and Resistance to Abrasion Wear of Selected Low-Alloy Boron Steel, Arch. Civ. Mech. Eng., 2016, 16, p 913–926CrossRef

16.

J.W. Morris, Jr., C. Kinney, K. Ptylweski, and Y. Adachi, Microstructure and Cleavage in Lath Martensitic Steels, Sci. Technol. Adv. Mater., 2013, 14, p 1–9CrossRef

17.

J.W. Morris, Jr., On Ductile–Brittle Transition in Lath Martensitic Steels, ISIJ Int., 2011, 51, p 1569–1575CrossRef

18.

C.R. Anoop, A. Prakash, S.V.S. Narayana Murty, and I. Samajdar, Optimization of Hot Workability and Microstructure Control in a 12Cr-10Ni Precipitation Hardenable Stainless Steel: An Approach Using Processing Maps, (Submitted to Materials Characterisation, under revision)

19.

C.R. Anoop, A. Prakash, S.V.S. Narayana Murty, and I. Samajdar, Origin of Low Temperature Toughness in a 12Cr-10Ni Martensitic Precipitation Hardenable Stainless Steel, Mater. Sci. Eng. A, 2018, 709, p 1–8CrossRef

20.

R.D. Doherthy, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQuen, and A.D. Rollet, Current Issues in Recrystallisation: A Review, Mater. Sci. Eng. A, 1997, 238, p 219–274CrossRef

21.

Y.V.R.K. Prasad and N. Ravichandran, Effect of SFE on the Dynamic Recrystallisation During Hot Working of FCC Metals: A Study Using Processing Maps, Bull. Mater. Sci., 1991, 14(5), p 1241–1248CrossRef

22.

H. Mirzadeh and A. Najafizadeh, Hot Deformation and Dynamic Recrystallisation of 17-4 PH Stainless Steel, ISIJ Int., 2013, 53, p 680–689CrossRef

23.

ASM International, ASM Handbook, Vol 14A, ASM International, Almere, 2010, p 261–268

24.

I. Salvatori, T. Inoue, and K. Nagai, Ultra Fin Grain Structure Through Dynamic Recrystallisation for Type 304 Stainless Steel, ISIJ Int., 2002, 42, p 744–750CrossRef

25.

T. Simm, L. Sun, S. McAdam, P. Hill, M. Rawson, and K. Perkins, The Influence of Lath, Block and Prior Austenite Grain (PAG) Size on the Tensile, Creep and Fatigue Properties of Novel Maraging Steel, Materials, 2017, 10, p 730CrossRef

26.

P.P. Sinha, Influence of Heat Treatment on Microstructure and Mechanical Properties of 18Ni Co-free (T-250 Grade) Maraging Steel, Ph.D. thesis, Banaras Hindu University (BHU), 1993

27.

H.J. Rack, Age Hardening-Grainsize Relationship in 18Ni Maraging Steels, Mater. Sci. Eng., 1978, 34, p 263–270CrossRef

Titel: Effect of Zener–Holloman Parameter on the Prior Austenite Grain size in a 12Cr-10Ni Precipitation-Hardenable Stainless Steel
verfasst von: C. R. Anoop
Aditya Prakash
S. V. S. Narayana Murty
Indradev Samajdar
Publikationsdatum: 30.05.2018
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 7/2018
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3431-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2018

Optimization of the Mechanical Properties and Residual Stresses in 2024 Aluminum Alloy Through Heat Treatment

Influence of Particle Size on the Basic and Time-Dependent Rheological Behaviors of Cemented Paste Backfill

Tribological Behavior of a Cr2O3 Ceramic Coating/Steel Couple Under Dry Sliding and Heavy Loading Conditions

An Analysis on the Constitutive Models for Forging of Ti6Al4V Alloy Considering the Softening Behavior

Effect of Immersion Time on Corrosion Behavior of Single-Phase Alloy and Nanocomposite Bismuth Telluride-Based Thermoelectrics in NaCl Solution

Effect of Ceramic Rolling and Annealing on Mechanical Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloys

Premium Partner

Marktübersichten