Weitere Kapitel dieses Buchs durch Wischen aufrufen
A number of technologies are being investigated for the Next Generation Nuclear Plant (NGNP) that will produce heated fluids at significantly higher temperatures than current generation power plants. The higher temperatures offer the opportunity to significantly improve the thermodynamic efficiency of the energy conversion cycle. Selection of the technology and design configuration for the NGNP must consider both the cost and risk profiles to ensure that the demonstration plant establishes a sound foundation for future commercial deployments. The NGNP challenge is to achieve a significant advancement in nuclear technology while at the same time setting the stage for an economically viable deployment of the new technology in the commercial sector soon after 2020. Energy is the elixir of life for the world’s economy and for individual prosperity. Efforts being made for greater energy efficiency – especially in industrial countries – have indeed proved effective, as evidenced by the fact that energy consumption throughout the world is growing slower than gross domestic products. At the same time, however, the hunger for energy in quickly growing economies is leading to shifts in energy mixes – which drives undesired CO2 emissions upward. In the conversion of primary energy to final and useful energy, technology from universities and national laboratories plus industry toward the design of the NGNP has made key contributions to the efficient handling of the resources of our planet.
Bitte loggen Sie sich ein, um Zugang zu diesem Inhalt zu erhalten
Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:
Mizia, R. E. (2008, April). Next generation nuclear plant intermediate heat exchanger acquisition strategy. INL/EXT-08-14054.
Zohuri, B. (2015). Combined cycle driven efficiency for next generation nuclear power plants: An innovative design approach. New York, NY: Springer Publishing Company. CrossRef
Zohuri, B., & McDaniel, P. (2015). Thermodynamics in nuclear power plant. New York, NY: Springer Publishing Company. CrossRef
Zohuri, B. (2014). Innovative open air Brayton combined cycle systems for the next generation nuclear power plants. Albuquerque, NM: University of New Mexico Publications.
Zohuri, B., & McDaniel, P. (2015). A comparison of a recuperated open cycle (air) Brayton power conversion system with the traditional steam Rankine cycle for the next generation nuclear power plant. Nuclear Science.
McDaniel, P. J., Zohuri, B., & de Oliveira, C. R. E. (2014, September). A combined cycle power conversion system for small modular LMFBRs. ANS Transactions.
Zohuri, B., McDaniel, P., & de Oliveira, C. R. E. (2014, June). A comparison of a recuperated open cycle (air) Brayton power conversion system with the traditional steam Rankine cycle for the next generation nuclear power plant. ANS Transactions.
McDaniel, P. J., de Oliveira, C. R. E., Zohuri, B., & Cole, J. (2012, November). A combined cycle power conversion system for the next generation nuclear power plant. ANS Transactions.
Forsberg, C., McDaniel, P., & Zohuri, B. (2015). Variable Electricity and Steam from Salt, Helium, and Sodium Cooled Base-Load Reactors with Gas Turbines and Heat Storage. Proceedings of ICAPP 2015, May 03–06, Nice (France) Paper 15115.
Necati Ozisik, M. (1985). Heat transfer: A basic approach. New York, NY: McGraw-Hill. MATH
McDonald, C. F., & Wilson, D. G. (1996). The utilization of recuperated and regenerated engine cycles for high-efficiency gas turbines in the 21st century. Applied Thermal Engineering, 16, 635–653. CrossRef
Zohuri, B. (2011). Heat pipe design and technology: a practical approach. Boca Raton, FL: CRC Press. CrossRef
Huzayyin, O. A. S. (2011). Computational Modeling of Convective Heat Transfer in Compact and Enhanced Heat Exchangers. University of Cincinnati, 193 pages, 3475151.
Shah, R. K. (2005). Compact heat exchangers for microturbines. Rochester, NY: Rochester Institute of Technology Dept. of Mechanical Engineering.
McDonald, C. F. (2000). Low cost recuperator concept for microturbine applications (ASME Paper No. 2000-GT-167). New York, NY: ASME. CrossRef
McDonald, C. F. (2000). Low-cost compact primary surface recuperator concept for microturbines. Applied Thermal Engineering, 20, 471–497. CrossRef
Kays, W. M., & London, A. L. (1984). Compact heat exchangers (3rd ed.). New York, NY: McGraw-Hill.
Zohuri, B., & Fathi, N. (2015). Thermal hydraulic analysis of nuclear reactors. New York, NY: Springer Publishing Company. CrossRef
Stone, K. (1996). Review of literature on heat transfer enhancement in compact heat exchangers. Urbana, IL: Air Conditioning & Refrigeration Center Mechanical & Industrial Engineering Dept., University of Illinois.
Bergles, A. E., Webb, R. L., & Junkan, G. H. (1979). Energy conservation via heat transfer enhancement. Energy, 4, 193–200. CrossRef
Webb, R. L. (1987). Enhancement of single-phase heat transfer. In S. Kakac, R. K. Shah, & A. E. Bergles (Eds.), Enhancement of single-phase heat transfer (p. 17-1-62). New York, NY: Wiley.
Shah, R. K. (1983). Classification of heat exchangers. In S. Kakac, R. K. Shah, & A. E. Bergles (Eds.), Low Reynolds number flow heat exchangers (pp. 9–14). Washington, DC: Hemisphere Publishing Corporation.
Shah, R. K., & Sekulic, D. P. (2003). Fundaments of heat exchangers design. New York, NY: John Wiley & Sons. CrossRef
Hesselgreaves, J. E. (2001). Compact heat exchangers, selection, design and operation. New York, NY: Pergramon Publication.
Kays, W. M., & Crawford, M. E. (1993). Convective heat and mass transfer (3rd ed.). New York, NY: McGraw Hill.
London, A. L. (1964). Compact heat exchangers: Part 2 — Surface geometry. Mechanical Engineering, 86, 31–34.
Sunden, B., (2005). High Temperature Heat Exchangers (HTHE). Proceedings of Fifth International conference on Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology, Hoboken, NJ, USA, September 2005.
Ohadi, M. M., & Buckey, S. G. (2001). High temperature heat exchangers and microscale combustion systems: Applications to thermal system miniaturization. Experimental Thermal and Fluid Science, 25, 207–217. CrossRef
Brent, A. (1989). Fundamentals of composites manufacturing materials methods and applications. Dearborn, MI: SME.
Dewson, S., & Li, X., (2005). Selection Criteria for the High Temperature Reactor Intermediate Heat Exchanger. Proceedings of ICAPP‘05, Seoul, Korea, May 15–19, 2005.
Sabharwall, P., & Kim, E. S. (2011). High temperature thermal devices for nuclear process heat transfer applications. Idaho: Idaho National Laboratory United States of America.
Martin, H. (1999). Economic Optimization of Compact Heat Exchangers. Proceedings of the International Conference on Compact Heat Exchangers and Enhancement Technology for the Process Industries, Banff, Begell House, New York.
Compact Heat Exchangers—Module 4.1. (2000, September). Energy Efficiency, GIR.
- Effective Design of Compact Heat Exchangers for Next Generation Nuclear Plants
- Chapter 7
Systemische Notwendigkeit zur Weiterentwicklung von Hybridnetzen