Skip to main content
Erschienen in: Metallurgical and Materials Transactions A 6/2013

01.06.2013

Effects of Different Modes of Hot Cross-Rolling in 7010 Aluminum Alloy: Part II. Mechanical Properties Anisotropy

verfasst von: Chandan Mondal, A. K. Singh, A. K. Mukhopadhyay, K. Chattopadhyay

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 6/2013

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The influence of microstructure and texture developed by different modes of hot cross-rolling on in-plane anisotropy (A IP) of yield strength, work hardening behavior, and anisotropy of Knoop hardness (KHN) yield locus has been investigated. The A IP and work hardening behavior are evaluated by tensile testing at 0 deg, 45 deg, and 90 deg to the rolling direction, while yield loci have been generated by directional KHN measurements. It has been observed that specimens especially in the peak-aged temper, in spite of having a strong, rotated Brass texture, show low A IP. The results are discussed on the basis of Schmid factor analyses in conjunction with microstructural features, namely grain morphology and precipitation effects. For the specimen having a single-component texture, the yield strength variation as a function of orientation can be rationalized by the Schmid factor analysis of a perfectly textured material behaving as a quasi-single crystal. The work hardening behavior is significantly affected by the presence of solute in the matrix and the state of precipitation rather than texture, while yield loci derived from KHN measurements reiterate the low anisotropy of the materials. Theoretic yield loci calculated from the texture data using the visco-plastic self-consistent model and Hill’s anisotropic equation are compared with that obtained experimentally.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat F.J. Humphreys and M. Hatherly: Recrystallization and Related Phenomena, Pergamon Press, Oxford, U.K., 1995. F.J. Humphreys and M. Hatherly: Recrystallization and Related Phenomena, Pergamon Press, Oxford, U.K., 1995.
2.
Zurück zum Zitat J.T. Staley: Proc. Int. Conf. on Aluminum Alloys (ICAA 3), L. Arnberg, O. Lohne, E. Nes, and N. Ryum, eds., The Norwegian Institute of Technology, Trondheim, 1992, pp. 107–29. J.T. Staley: Proc. Int. Conf. on Aluminum Alloys (ICAA 3), L. Arnberg, O. Lohne, E. Nes, and N. Ryum, eds., The Norwegian Institute of Technology, Trondheim, 1992, pp. 107–29.
3.
Zurück zum Zitat W.F. Hosford (1966) Met. Eng. Q 6(4), pp. 13–19. W.F. Hosford (1966) Met. Eng. Q 6(4), pp. 13–19.
4.
Zurück zum Zitat K.V. Jata, A.K. Hopkins, and R.J. Rioja: Mater. Sci. Forum, 1996, vols. 217–222, pp. 647-52.CrossRef K.V. Jata, A.K. Hopkins, and R.J. Rioja: Mater. Sci. Forum, 1996, vols. 217–222, pp. 647-52.CrossRef
5.
Zurück zum Zitat F. Barlat, S.M. Miyasato, J. Liu, and J.C. Brem: Aluminium Alloys: Their Physical and Mechanical Properties (ICAA 4), T.H. Sanders, Jr., and E.A. Starke, Jr., eds., Georgia Institute of Technology, Atlanta, 1994, p. 389. F. Barlat, S.M. Miyasato, J. Liu, and J.C. Brem: Aluminium Alloys: Their Physical and Mechanical Properties (ICAA 4), T.H. Sanders, Jr., and E.A. Starke, Jr., eds., Georgia Institute of Technology, Atlanta, 1994, p. 389.
6.
Zurück zum Zitat P.J. Gregson, and H.M. Flower: Acta metall., 1985, vol. 33, pp. 527-37.CrossRef P.J. Gregson, and H.M. Flower: Acta metall., 1985, vol. 33, pp. 527-37.CrossRef
7.
Zurück zum Zitat N.E. Prasad and G. Malakondaiah: Bull. Mater. Sci., 1992, vol. 15, pp. 297-310.CrossRef N.E. Prasad and G. Malakondaiah: Bull. Mater. Sci., 1992, vol. 15, pp. 297-310.CrossRef
8.
Zurück zum Zitat A.K. Vasudevan, M.A. Przystupa, and W.G. Fricke, Jr.: Scripta Metall. Mater., 1990, vol. 24, pp. 1429-34.CrossRef A.K. Vasudevan, M.A. Przystupa, and W.G. Fricke, Jr.: Scripta Metall. Mater., 1990, vol. 24, pp. 1429-34.CrossRef
9.
Zurück zum Zitat F. Barlat, D.J. Lege, J.C. Brem, and C.J. Warren: Textures Microstruct., 1991, vol. 14-18, pp. 1013-18. F. Barlat, D.J. Lege, J.C. Brem, and C.J. Warren: Textures Microstruct., 1991, vol. 14-18, pp. 1013-18.
10.
Zurück zum Zitat X.H. Zeng, M. Ahmad, and O. Engler: Mater. Sci. Technol., 1994, vol. 10, pp. 581-91.CrossRef X.H. Zeng, M. Ahmad, and O. Engler: Mater. Sci. Technol., 1994, vol. 10, pp. 581-91.CrossRef
11.
Zurück zum Zitat S. Fox, H.M. Flower, and D.S. McDarmaid: Aluminium Alloys: Their Physical and Mechanical Properties (ICAA2), E.A. Starke, Jr. and T.H. Sander, Jr., eds., University of Virginia, Charlottesville, 1986, pp. 939–50. S. Fox, H.M. Flower, and D.S. McDarmaid: Aluminium Alloys: Their Physical and Mechanical Properties (ICAA2), E.A. Starke, Jr. and T.H. Sander, Jr., eds., University of Virginia, Charlottesville, 1986, pp. 939–50.
12.
Zurück zum Zitat W.F. Hosford and R.H. Zeisloft: Metall. Trans., 1972, vol. 3, pp. 113-21.CrossRef W.F. Hosford and R.H. Zeisloft: Metall. Trans., 1972, vol. 3, pp. 113-21.CrossRef
13.
Zurück zum Zitat H. Hargarter, M.T. Lyttle, and E.A. Starke: Mater. Sci. Eng. A, 1998, vol. A257, pp. 87-99. H. Hargarter, M.T. Lyttle, and E.A. Starke: Mater. Sci. Eng. A, 1998, vol. A257, pp. 87-99.
14.
Zurück zum Zitat R.K. Singh, A.K. Singh and N.E. Prasad: Mater. Sci. Eng. A, 2000, vol. A277, pp. 114-22. R.K. Singh, A.K. Singh and N.E. Prasad: Mater. Sci. Eng. A, 2000, vol. A277, pp. 114-22.
15.
Zurück zum Zitat J.J. Fundenberger, M.J. Philippe, C. Esling, P. Lequeu, and B. Chenal: Textures and Microstruct., 1993, vol. 21, pp. 93-108.CrossRef J.J. Fundenberger, M.J. Philippe, C. Esling, P. Lequeu, and B. Chenal: Textures and Microstruct., 1993, vol. 21, pp. 93-108.CrossRef
16.
Zurück zum Zitat X.-H. Zeng, N.-E. Andersson, and S. Johansson: Proc. 11th Int. Conf. Texture of Materials (ICOTOM 11), Z. Liang, L. Zuo, and Y. Chu, eds., International Academic Publishers, Beijing, 1996, p. 1172. X.-H. Zeng, N.-E. Andersson, and S. Johansson: Proc. 11th Int. Conf. Texture of Materials (ICOTOM 11), Z. Liang, L. Zuo, and Y. Chu, eds., International Academic Publishers, Beijing, 1996, p. 1172.
17.
Zurück zum Zitat J. Dutkiewicz and J. Bonarski: Mater. Des., 1997, vol. 18, pp. 247-52.CrossRef J. Dutkiewicz and J. Bonarski: Mater. Des., 1997, vol. 18, pp. 247-52.CrossRef
19.
Zurück zum Zitat R.G. Wheeler and D.R. Ireland: Electrochem. Technol., 1966, vol. 4, p. 313. R.G. Wheeler and D.R. Ireland: Electrochem. Technol., 1966, vol. 4, p. 313.
20.
Zurück zum Zitat D. Lee and W.A. Backofen: Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 1696-1704. D. Lee and W.A. Backofen: Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 1696-1704.
21.
Zurück zum Zitat A. Fitzgibbon, M. Pilu, and R.B. Fisher: IEEE Trans. Pattern Anal. Mach. Intell., 1999, vol. 21, pp. 476-80.CrossRef A. Fitzgibbon, M. Pilu, and R.B. Fisher: IEEE Trans. Pattern Anal. Mach. Intell., 1999, vol. 21, pp. 476-80.CrossRef
22.
Zurück zum Zitat R.A. Lebensohn, C.N. Tome: Acta Metall. Mater., 1993, vol. 41, p. 2611.CrossRef R.A. Lebensohn, C.N. Tome: Acta Metall. Mater., 1993, vol. 41, p. 2611.CrossRef
23.
Zurück zum Zitat C.N. Tome, G.R. Cannova, U.F. Kocks: Acta Metall. Mater., 1984, vol. 32, p. 1637.CrossRef C.N. Tome, G.R. Cannova, U.F. Kocks: Acta Metall. Mater., 1984, vol. 32, p. 1637.CrossRef
24.
Zurück zum Zitat W.T. Wu and C.H. Koo: Scripta Metall. Mater., 1998, vol. 38, p. 267. W.T. Wu and C.H. Koo: Scripta Metall. Mater., 1998, vol. 38, p. 267.
25.
Zurück zum Zitat M.T. Lyttle and J.A. Wert: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3503-12.CrossRef M.T. Lyttle and J.A. Wert: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3503-12.CrossRef
26.
Zurück zum Zitat A.K. Singh, A.A. Gokhale, G.G. Saha, and R.K. Ray: Textures in Materials Research, R.K. Ray and A.K. Singh, eds., Oxford and IBH Publishing Co., New Delhi, 1999, pp. 219–32. A.K. Singh, A.A. Gokhale, G.G. Saha, and R.K. Ray: Textures in Materials Research, R.K. Ray and A.K. Singh, eds., Oxford and IBH Publishing Co., New Delhi, 1999, pp. 219–32.
27.
Zurück zum Zitat D. Juul Jensen and N. Hansen: Acta Metall. Mater., 1990, vol. 38, pp. 1369-80.CrossRef D. Juul Jensen and N. Hansen: Acta Metall. Mater., 1990, vol. 38, pp. 1369-80.CrossRef
28.
29.
Zurück zum Zitat W.G. Fricke, Jr., M.A. Przystupa, and F. Barlat: Aluminium Technology 1986, T. Sheppard, ed., The Institute of Metals, London, 1986, pp. 310–16. W.G. Fricke, Jr., M.A. Przystupa, and F. Barlat: Aluminium Technology 1986, T. Sheppard, ed., The Institute of Metals, London, 1986, pp. 310–16.
30.
Zurück zum Zitat C.Q. Chen and H.X. Li: Mater. Sci. Technol., 1987, vol. 3, pp. 125-29.CrossRef C.Q. Chen and H.X. Li: Mater. Sci. Technol., 1987, vol. 3, pp. 125-29.CrossRef
31.
Zurück zum Zitat H.X. Li and C.Q. Chen: Acta Aeronaut. Astronaut. Sin., 1990, vol. 11, pp. A106-10. H.X. Li and C.Q. Chen: Acta Aeronaut. Astronaut. Sin., 1990, vol. 11, pp. A106-10.
32.
Zurück zum Zitat A.K. Mukhopadhyay, K.S. Prasad, and D.S.K. Murali: Mater. Sci. Technol., 2011, vol. 27, pp. 1732-35. A.K. Mukhopadhyay, K.S. Prasad, and D.S.K. Murali: Mater. Sci. Technol., 2011, vol. 27, pp. 1732-35.
33.
Zurück zum Zitat V.M.J. Sharma, K.S. Kumar, B.N. Rao, and S.D. Pathak: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3186-95.CrossRef V.M.J. Sharma, K.S. Kumar, B.N. Rao, and S.D. Pathak: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3186-95.CrossRef
34.
35.
Zurück zum Zitat G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, London, 1988. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, London, 1988.
36.
Zurück zum Zitat D. Lee: Science of Hardness Testing and Its Applications, J.H. Westbrook and H. Conrad, eds., ASM International, Metals Park, OH, 1973, pp. 147–65. D. Lee: Science of Hardness Testing and Its Applications, J.H. Westbrook and H. Conrad, eds., ASM International, Metals Park, OH, 1973, pp. 147–65.
37.
38.
Zurück zum Zitat A.K. Singh, C.R. Mohan Rao and K. Srinivasan: Met. Mater. Process., 2007, vol. 19, pp. 89-100. A.K. Singh, C.R. Mohan Rao and K. Srinivasan: Met. Mater. Process., 2007, vol. 19, pp. 89-100.
39.
Zurück zum Zitat B.C. Wonsiewicz and W.W. Wilkening: Trans. Metall. Soc. AIME, 1969, vol. 245, pp. 1313-19. B.C. Wonsiewicz and W.W. Wilkening: Trans. Metall. Soc. AIME, 1969, vol. 245, pp. 1313-19.
Metadaten
Titel
Effects of Different Modes of Hot Cross-Rolling in 7010 Aluminum Alloy: Part II. Mechanical Properties Anisotropy
verfasst von
Chandan Mondal
A. K. Singh
A. K. Mukhopadhyay
K. Chattopadhyay
Publikationsdatum
01.06.2013
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions A / Ausgabe 6/2013
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-013-1678-y

Weitere Artikel der Ausgabe 6/2013

Metallurgical and Materials Transactions A 6/2013 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.