Skip to main content

2019 | OriginalPaper | Buchkapitel

Effects of Temperature Curing on Concrete with Silica

verfasst von : Mohit Manwatkar, P. Y. Pawade

Erschienen in: Smart Technologies for Energy, Environment and Sustainable Development

Verlag: Springer Singapore

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Steam curing results in gain of early strength of the concrete in comparison with normal curing. If the concrete develops considerable strength in its initial and ultimate stage, then curing plays foremost important role and on the other hand large curing time may lead to excess of cost of structure and sometimes may even lead to unexpected delay. Steam curing is one of important tools due to which erection of the formworks can be done at early age and can be used for other important works. Due to steam curing, the hydration process takes place at rapid rate and the double the strength in comparison with normal curing at 3 days and 7 days can be obtained. In this paper, silica fume has been used as partial replacement in collaboration with cement and also the comparative comparison was made between steam curing results and normal curing result. All the results obtained are for various mixes and are presented in this paper.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat ACI Committee 234 Report.: “Guide for the Use of Silica Fume in Concrete,” ACI Manual of Concrete Practice: Materials and General Properties of Concrete (Part 1): 234R1—234R51. American Concrete Institute. Farmington Hills, MI (1997) ACI Committee 234 Report.: “Guide for the Use of Silica Fume in Concrete,” ACI Manual of Concrete Practice: Materials and General Properties of Concrete (Part 1): 234R1—234R51. American Concrete Institute. Farmington Hills, MI (1997)
2.
Zurück zum Zitat Abo-ElEnein, S., Daimon, M., Ohsawa, S., Kondo, R.: Hydration of low porosity slag-lime pastes. Cem. Concr. Res. 4, 299–312 (1974)CrossRef Abo-ElEnein, S., Daimon, M., Ohsawa, S., Kondo, R.: Hydration of low porosity slag-lime pastes. Cem. Concr. Res. 4, 299–312 (1974)CrossRef
3.
Zurück zum Zitat Husem, M.: The effects of high temperature on compressive and flexural strengths of ordinary and high-performance concrete. Fire Saf. J. 41(2), 155–163 (2006)CrossRef Husem, M.: The effects of high temperature on compressive and flexural strengths of ordinary and high-performance concrete. Fire Saf. J. 41(2), 155–163 (2006)CrossRef
4.
Zurück zum Zitat Khoury, G.A.: Compressive strength of concrete at high temperatures: A reassessment. Mag. Concr. Res. 44(161), 291–309 (1992)CrossRef Khoury, G.A.: Compressive strength of concrete at high temperatures: A reassessment. Mag. Concr. Res. 44(161), 291–309 (1992)CrossRef
5.
Zurück zum Zitat William Andrew.: Concrete admixtures handbook, properties, science, and technology, crafts and Hobbies (1995) William Andrew.: Concrete admixtures handbook, properties, science, and technology, crafts and Hobbies (1995)
6.
Zurück zum Zitat Dotreppe, J.C., Fransen, J.M., Bruls, A., Baus, R., Vandervelde, P., Minnes, R., van Meurvenburg, D., Lambette, H.: Experimental research on the determination of main parameters affecting the behaviour of reinforced concrete columns under fire conditions. J. Mag. Concr. Res. 49, 117–127 (1997)CrossRef Dotreppe, J.C., Fransen, J.M., Bruls, A., Baus, R., Vandervelde, P., Minnes, R., van Meurvenburg, D., Lambette, H.: Experimental research on the determination of main parameters affecting the behaviour of reinforced concrete columns under fire conditions. J. Mag. Concr. Res. 49, 117–127 (1997)CrossRef
7.
Zurück zum Zitat Kjellsen, K.O., Wallerik, O.H., Fjallberg, L.: Microstructure and microchemistry of the paste—aggregate interfacial transition zone of High—performance Concrete. J. Adv. Cem. Res. 10, 33–40 (1998)CrossRef Kjellsen, K.O., Wallerik, O.H., Fjallberg, L.: Microstructure and microchemistry of the paste—aggregate interfacial transition zone of High—performance Concrete. J. Adv. Cem. Res. 10, 33–40 (1998)CrossRef
8.
Zurück zum Zitat Felicetti, R., Gambarova, P.G.: Effect of high temperature on the residual compressive strength of high strength siliceous concretes. J. ACI Mater. J. 95, 395–406 (1998) Felicetti, R., Gambarova, P.G.: Effect of high temperature on the residual compressive strength of high strength siliceous concretes. J. ACI Mater. J. 95, 395–406 (1998)
9.
Zurück zum Zitat Calado, C., Camoes, C., Monteiro, E., Helena, P., Barkokebas Jr., B.: Durability indicators comparison for SCC and CC in tropical coastal environments. Materials 8, 1458–1481 (2015)CrossRef Calado, C., Camoes, C., Monteiro, E., Helena, P., Barkokebas Jr., B.: Durability indicators comparison for SCC and CC in tropical coastal environments. Materials 8, 1458–1481 (2015)CrossRef
10.
Zurück zum Zitat Farve, R., Charif, H., Jaccoud, J.-P.: Large reduction of deflections due to high performance concrete. In: Malier, Y. (ed.) High performance concrete: From material to structure, pp. 160–185. London, UK, E & FN Spon (1992) Farve, R., Charif, H., Jaccoud, J.-P.: Large reduction of deflections due to high performance concrete. In: Malier, Y. (ed.) High performance concrete: From material to structure, pp. 160–185. London, UK, E & FN Spon (1992)
11.
Zurück zum Zitat Aitcin, P.-C.: Developments in the application of high performance concrete. Constr. Build. Mater. 9, 13–17 (1995)CrossRef Aitcin, P.-C.: Developments in the application of high performance concrete. Constr. Build. Mater. 9, 13–17 (1995)CrossRef
12.
Zurück zum Zitat Ryell, J., Bickley, J.A.: Scotia plaza: High strength concrete for tall buildings. In: Proceedings of the Symposium on Utilization of High Strength Concrete, pp. 641–653 Stavanger, Norway 15–18 June 1987 Ryell, J., Bickley, J.A.: Scotia plaza: High strength concrete for tall buildings. In: Proceedings of the Symposium on Utilization of High Strength Concrete, pp. 641–653 Stavanger, Norway 15–18 June 1987
Metadaten
Titel
Effects of Temperature Curing on Concrete with Silica
verfasst von
Mohit Manwatkar
P. Y. Pawade
Copyright-Jahr
2019
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-13-6148-7_35