Skip to main content
Erschienen in: Metals and Materials International 6/2019

30.05.2019

Electrochemical and Spectroscopic Study on the Corrosion of Ti–5Al and Ti–5Al–5Cu in Chloride Solutions

verfasst von: El-Sayed M. Sherif, Fahamsyah H. Latief, Hany S. Abdo, Nabeel H. Alharthi

Erschienen in: Metals and Materials International | Ausgabe 6/2019

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

In this study, manufacturing of Ti–5Al and Ti–5Al–5Cu alloys were accomplished employing mechanical alloying technique. The corrosion resistance in 3.5 wt% NaCl solution of Ti–5Al and Ti–5Al–5Cu alloys was investigated using cyclic polarization (CPP), electrochemical impedance spectroscopy (EIS) and chronoamperometric current–time measurements. The corroded surfaces of Ti–5Al and Ti–5Al–5Cu were examined by the use of a scanning electron microscopy and energy dispersive X-ray spectroscopy. It is found that Ti–5Al suffers both uniform and pitting corrosion, particularly with prolonging the time of exposure period in the chloride solution. While, the addition of Cu, Ti–5Al–5Cu alloy, increases the intensity of uniform corrosion and decreases the probability of pitting attack. Prolonging the immersion time to 48 h before measurement decreases the corrosion of Ti–5Al alloy, while increases the corrosion of Ti–5Al–5Cu.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat C. Suryanarayana, Recent developments in mechanical alloying. Rev. Adv. Mater. Sci. 18, 203–211 (2008) C. Suryanarayana, Recent developments in mechanical alloying. Rev. Adv. Mater. Sci. 18, 203–211 (2008)
2.
Zurück zum Zitat J.S. Benjamin, Mechanical alloying-A prospective. Met. Powder Rep. 45, 122–127 (1990)CrossRef J.S. Benjamin, Mechanical alloying-A prospective. Met. Powder Rep. 45, 122–127 (1990)CrossRef
3.
Zurück zum Zitat C.C. Koch, Intermetallic matrix composites prepared by mechanical alloying—a review. Mater. Sci. Eng. A 244, 39–48 (1998)CrossRef C.C. Koch, Intermetallic matrix composites prepared by mechanical alloying—a review. Mater. Sci. Eng. A 244, 39–48 (1998)CrossRef
4.
Zurück zum Zitat H.D.K.H. Bhadeshia, Mechanically alloyed metals. Mater. Sci. Technol. 1, 1404–1411 (2000)CrossRef H.D.K.H. Bhadeshia, Mechanically alloyed metals. Mater. Sci. Technol. 1, 1404–1411 (2000)CrossRef
5.
Zurück zum Zitat M.A. Shaikh et al., Alloying of immiscible Ge with Al by ball milling. Mater. Lett. 57, 3681–3685 (2003)CrossRef M.A. Shaikh et al., Alloying of immiscible Ge with Al by ball milling. Mater. Lett. 57, 3681–3685 (2003)CrossRef
6.
Zurück zum Zitat E. Ma, M. Atzmon, Phase transformations induced by mechanical alloying in a binary system. Mater. Chem. Phys. 39, 249–267 (1995)CrossRef E. Ma, M. Atzmon, Phase transformations induced by mechanical alloying in a binary system. Mater. Chem. Phys. 39, 249–267 (1995)CrossRef
7.
Zurück zum Zitat C.C. Koch, J.D. Whittenberger, Review: mechanical milling/alloying of Intermetallic. Intermetallics 4, 339–355 (1996)CrossRef C.C. Koch, J.D. Whittenberger, Review: mechanical milling/alloying of Intermetallic. Intermetallics 4, 339–355 (1996)CrossRef
8.
Zurück zum Zitat Yuhua Li, Chao Yang, Haidong Zhao, Qu Shengguan, Xiaoqiang Li, Yuanyuan Li, New developments of Ti-based alloys for biomedical applications. Materials 7(3), 1709–1800 (2014)CrossRef Yuhua Li, Chao Yang, Haidong Zhao, Qu Shengguan, Xiaoqiang Li, Yuanyuan Li, New developments of Ti-based alloys for biomedical applications. Materials 7(3), 1709–1800 (2014)CrossRef
9.
Zurück zum Zitat S. Gorsse, D.B. Miracle, Mechanical properties of Ti–6Al–4V/TiB composites with randomly oriented and aligned TiB reinforcements. Acta Mater. 51, 2427–2442 (2003)CrossRef S. Gorsse, D.B. Miracle, Mechanical properties of Ti–6Al–4V/TiB composites with randomly oriented and aligned TiB reinforcements. Acta Mater. 51, 2427–2442 (2003)CrossRef
10.
Zurück zum Zitat R.W. Hayes, G.B. Viswanathan, M.J. Mills, Creep behavior of Ti–6Al–2Sn–4Zr–2Mo: the effect of nickel on creep deformation and microstructure. Acta Mater. 50, 4953–4963 (2002)CrossRef R.W. Hayes, G.B. Viswanathan, M.J. Mills, Creep behavior of Ti–6Al–2Sn–4Zr–2Mo: the effect of nickel on creep deformation and microstructure. Acta Mater. 50, 4953–4963 (2002)CrossRef
11.
Zurück zum Zitat H. Zhang, H. Kou, J. Yang, D. Huang, H. Nan, J. Li, Microstructure evolution and tensile properties of Ti–6.5Al–2Zr–Mo–V alloy processed with thermo hydrogen treatment. Mater. Sci. Eng. A 619, 274–280 (2014)CrossRef H. Zhang, H. Kou, J. Yang, D. Huang, H. Nan, J. Li, Microstructure evolution and tensile properties of Ti–6.5Al–2Zr–Mo–V alloy processed with thermo hydrogen treatment. Mater. Sci. Eng. A 619, 274–280 (2014)CrossRef
12.
Zurück zum Zitat H.J. Rack, J.I. Qazi, Titanium alloys for biomedical applications. Mater. Sci. Eng. C 26, 1269–1277 (2006)CrossRef H.J. Rack, J.I. Qazi, Titanium alloys for biomedical applications. Mater. Sci. Eng. C 26, 1269–1277 (2006)CrossRef
13.
Zurück zum Zitat L.C. Zhang, H. Attar, Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review. Adv. Eng. Mater. 18, 463–475 (2016)CrossRef L.C. Zhang, H. Attar, Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review. Adv. Eng. Mater. 18, 463–475 (2016)CrossRef
14.
Zurück zum Zitat J. Pang, D.J. Blackwood, Corrosion of titanium alloys in high temperature near anaerobic seawater. Corros. Sci. 105, 17–24 (2016)CrossRef J. Pang, D.J. Blackwood, Corrosion of titanium alloys in high temperature near anaerobic seawater. Corros. Sci. 105, 17–24 (2016)CrossRef
15.
Zurück zum Zitat I.V. Gorynin, Titanium alloys for marine application. Mater. Sci. Eng. A 263, 112–116 (1999)CrossRef I.V. Gorynin, Titanium alloys for marine application. Mater. Sci. Eng. A 263, 112–116 (1999)CrossRef
16.
Zurück zum Zitat M.F. Erinosho, E.T. Akinlabi, S. Pityana, Microstructure and corrosion behaviour of laser metal deposited Ti6Al4V/Cu composites in 3.5% sea water. Mater. Today Proc. 2, 1166–1174 (2015)CrossRef M.F. Erinosho, E.T. Akinlabi, S. Pityana, Microstructure and corrosion behaviour of laser metal deposited Ti6Al4V/Cu composites in 3.5% sea water. Mater. Today Proc. 2, 1166–1174 (2015)CrossRef
17.
Zurück zum Zitat L.L.G. da Silva, M. Ueda, M.M. Silva et al., Corrosion behavior of Ti–6Al–4V alloy treated by plasma immersion ion implantation process. Surf. Coat. Technol. 201, 8136–8139 (2007)CrossRef L.L.G. da Silva, M. Ueda, M.M. Silva et al., Corrosion behavior of Ti–6Al–4V alloy treated by plasma immersion ion implantation process. Surf. Coat. Technol. 201, 8136–8139 (2007)CrossRef
18.
Zurück zum Zitat H. Ahn, D. Lee, K.-M. Lee et al., Oxidation behavior and corrosion resistance of Ti–10Ta–10Nb alloy. Surf. Coat. Technol. 202, 5784–5789 (2008)CrossRef H. Ahn, D. Lee, K.-M. Lee et al., Oxidation behavior and corrosion resistance of Ti–10Ta–10Nb alloy. Surf. Coat. Technol. 202, 5784–5789 (2008)CrossRef
19.
Zurück zum Zitat R. Narayanan, S.K. Seshadri, Point defect model and corrosion of anodic oxide coatings on Ti–6Al–4V. Corros. Sci. 50, 1521–1529 (2008)CrossRef R. Narayanan, S.K. Seshadri, Point defect model and corrosion of anodic oxide coatings on Ti–6Al–4V. Corros. Sci. 50, 1521–1529 (2008)CrossRef
20.
Zurück zum Zitat Y. Li, L. Qu, F. Wang, The electrochemical corrosion behavior of TiN and (Ti, Al)N coatings in acid and salt solution. Corros. Sci. 45, 1367–1381 (2003)CrossRef Y. Li, L. Qu, F. Wang, The electrochemical corrosion behavior of TiN and (Ti, Al)N coatings in acid and salt solution. Corros. Sci. 45, 1367–1381 (2003)CrossRef
21.
Zurück zum Zitat L.T. Duarte, S.R. Biaggio, R.C. Rocha-Filho et al., Surface characterization of oxides grown on the Ti–13Nb–13Zr alloy and their corrosion protection. Corros. Sci. 72, 35–40 (2013)CrossRef L.T. Duarte, S.R. Biaggio, R.C. Rocha-Filho et al., Surface characterization of oxides grown on the Ti–13Nb–13Zr alloy and their corrosion protection. Corros. Sci. 72, 35–40 (2013)CrossRef
22.
Zurück zum Zitat E.S.M. Sherif, A.A. Almajid, F.H. Latif, H. Junaedi, Effects of graphite on the corrosion behavior of aluminum-graphite composite in sodium chloride solutions. Int. J. Electrochem. Sci. 6, 1085–1099 (2011) E.S.M. Sherif, A.A. Almajid, F.H. Latif, H. Junaedi, Effects of graphite on the corrosion behavior of aluminum-graphite composite in sodium chloride solutions. Int. J. Electrochem. Sci. 6, 1085–1099 (2011)
23.
Zurück zum Zitat E.S.M. Sherif, Effects of exposure time on the anodic dissolution of Monel-400 in aerated stagnant sodium chloride solutions. J. Solid State Electrochem. 16, 891–899 (2012)CrossRef E.S.M. Sherif, Effects of exposure time on the anodic dissolution of Monel-400 in aerated stagnant sodium chloride solutions. J. Solid State Electrochem. 16, 891–899 (2012)CrossRef
24.
Zurück zum Zitat F.H. Latief, E.S.M. Sherif, A.A. Almajid, H. Junaedi, Fabrication of exfoliated graphite nanoplatelets-reinforced aluminum composites and evaluating their mechanical properties and corrosion behavior. J. Anal. Appl. Pyrolysis 92, 485–492 (2011)CrossRef F.H. Latief, E.S.M. Sherif, A.A. Almajid, H. Junaedi, Fabrication of exfoliated graphite nanoplatelets-reinforced aluminum composites and evaluating their mechanical properties and corrosion behavior. J. Anal. Appl. Pyrolysis 92, 485–492 (2011)CrossRef
25.
Zurück zum Zitat E.S.M. Sherif, J.H. Potgieter, J.D. Comins, L. Cornish, P.A. Olubambi, C.N. Machio, The beneficial effect of ruthenium additions on the passivation of duplex stainless steel corrosion in sodium chloride solutions. Corros. Sci. 51, 1364–1371 (2009)CrossRef E.S.M. Sherif, J.H. Potgieter, J.D. Comins, L. Cornish, P.A. Olubambi, C.N. Machio, The beneficial effect of ruthenium additions on the passivation of duplex stainless steel corrosion in sodium chloride solutions. Corros. Sci. 51, 1364–1371 (2009)CrossRef
26.
Zurück zum Zitat El-Sayed M. Sherif, Abdulhakim A. Almajid, Corrosion of magnesium/manganese alloy in chloride solutions and its inhibition by 5-(3-aminophenyl)-tetrazole. Int. J. Electrochem. Sci. 6, 2131–2148 (2011) El-Sayed M. Sherif, Abdulhakim A. Almajid, Corrosion of magnesium/manganese alloy in chloride solutions and its inhibition by 5-(3-aminophenyl)-tetrazole. Int. J. Electrochem. Sci. 6, 2131–2148 (2011)
27.
Zurück zum Zitat K.A. Khalil, E.S.M. Sherif, A.A. Almajid, Corrosion passivation in simulated body fluid of magnesium/hydroxyapatite nanocomposites sintered by high frequency induction heating. Int. J. Electrochem. Sci. 6, 6184–6199 (2011) K.A. Khalil, E.S.M. Sherif, A.A. Almajid, Corrosion passivation in simulated body fluid of magnesium/hydroxyapatite nanocomposites sintered by high frequency induction heating. Int. J. Electrochem. Sci. 6, 6184–6199 (2011)
28.
Zurück zum Zitat W.A. Badawy, F.M. Al-Kharafi, A.A. El-Azab, Electrochemical behaviour and corrosion inhibition of Al, Al-6061 and Al–Cu in neutral aqueous solutions. Corros. Sci. 41, 709–727 (1999)CrossRef W.A. Badawy, F.M. Al-Kharafi, A.A. El-Azab, Electrochemical behaviour and corrosion inhibition of Al, Al-6061 and Al–Cu in neutral aqueous solutions. Corros. Sci. 41, 709–727 (1999)CrossRef
29.
Zurück zum Zitat J.W. Diggle, T.C. Downie, C. Goulding, The dissolution of porous oxide films on aluminium. Electrochim. Acta 15, 1079–1093 (1970)CrossRef J.W. Diggle, T.C. Downie, C. Goulding, The dissolution of porous oxide films on aluminium. Electrochim. Acta 15, 1079–1093 (1970)CrossRef
30.
Zurück zum Zitat W.A. Badawy, M.S. El-Basiouny, M.M. Ibrahim, Kinetics of the dissolution of phosphoric acid anodized aluminium as revealed from impedance measurements in phosphate media. Indian J. Technol. 24, 1–6 (1986) W.A. Badawy, M.S. El-Basiouny, M.M. Ibrahim, Kinetics of the dissolution of phosphoric acid anodized aluminium as revealed from impedance measurements in phosphate media. Indian J. Technol. 24, 1–6 (1986)
31.
Zurück zum Zitat F.D. Wall, M.A. Martinez, J.J. Vandenavyle, Relationship between induction time for pitting and pitting potential for high-purity aluminum. J. Electrochem. Soc. 151, B354–B358 (2004)CrossRef F.D. Wall, M.A. Martinez, J.J. Vandenavyle, Relationship between induction time for pitting and pitting potential for high-purity aluminum. J. Electrochem. Soc. 151, B354–B358 (2004)CrossRef
32.
Zurück zum Zitat C.M.A. Brett, I.A.R. Gomes, J.P.S. Martins, The electrochemical behaviour and corrosion of aluminium in chloride media. The effect of inhibitor anions. Corros. Sci. 36, 915–923 (1994)CrossRef C.M.A. Brett, I.A.R. Gomes, J.P.S. Martins, The electrochemical behaviour and corrosion of aluminium in chloride media. The effect of inhibitor anions. Corros. Sci. 36, 915–923 (1994)CrossRef
33.
Zurück zum Zitat F.M. Al-Kharafi, W.A. Badawy, Corrosion and passivation of Al and Al-Si alloys in nitric acid solutions II—Effect of chloride ions. Electrochim. Acta 40, 1811–1817 (1995)CrossRef F.M. Al-Kharafi, W.A. Badawy, Corrosion and passivation of Al and Al-Si alloys in nitric acid solutions II—Effect of chloride ions. Electrochim. Acta 40, 1811–1817 (1995)CrossRef
34.
Zurück zum Zitat F. Hunkeler, G.S. Frankel, H. Bohni, Technical note: on the mechanism of localized corrosion. Corrosion (Houston) 43, 189–191 (1987)CrossRef F. Hunkeler, G.S. Frankel, H. Bohni, Technical note: on the mechanism of localized corrosion. Corrosion (Houston) 43, 189–191 (1987)CrossRef
35.
Zurück zum Zitat N. Sato, The stability of localized corrosion. Corros. Sci. 37, 1947–1967 (1995)CrossRef N. Sato, The stability of localized corrosion. Corros. Sci. 37, 1947–1967 (1995)CrossRef
36.
Zurück zum Zitat M.M. Mazhar, W.A. Badawy, M.M. Abou-Romia, Impedance studies of corrosion resistance of aluminium in chloride media. Surf. Coat. Technol. 29, 337–345 (1987) M.M. Mazhar, W.A. Badawy, M.M. Abou-Romia, Impedance studies of corrosion resistance of aluminium in chloride media. Surf. Coat. Technol. 29, 337–345 (1987)
37.
Zurück zum Zitat R.T. Foley, T.H. Nguyen, The chemical nature of aluminum corrosion-V. Energy transfer in aluminum dissolution. J. Electrochem. Soc. 129, 464–467 (1982)CrossRef R.T. Foley, T.H. Nguyen, The chemical nature of aluminum corrosion-V. Energy transfer in aluminum dissolution. J. Electrochem. Soc. 129, 464–467 (1982)CrossRef
38.
Zurück zum Zitat L. Tomcsanyi, K. Varga, I. Bartik, G. Horanyi, E. Maleczki, Electrochemical study of the pitting corrosion of aluminium and its alloys—II. Study of the interaction of chloride ions with a passive film on aluminium and initiation of pitting corrosion. Electrochim. Acta 34, 855–859 (1989)CrossRef L. Tomcsanyi, K. Varga, I. Bartik, G. Horanyi, E. Maleczki, Electrochemical study of the pitting corrosion of aluminium and its alloys—II. Study of the interaction of chloride ions with a passive film on aluminium and initiation of pitting corrosion. Electrochim. Acta 34, 855–859 (1989)CrossRef
39.
Zurück zum Zitat N. Alharthi, E.S.M. Sherif, H.S. Abdo, S. Zein El Abedin, Effect of nickel content on the corrosion resistance of iron-nickel alloys in concentrated hydrochloric acid pickling solutions. Adv. Mater. Sci. Eng. 2017, 1–8 (2017) N. Alharthi, E.S.M. Sherif, H.S. Abdo, S. Zein El Abedin, Effect of nickel content on the corrosion resistance of iron-nickel alloys in concentrated hydrochloric acid pickling solutions. Adv. Mater. Sci. Eng. 2017, 1–8 (2017)
Metadaten
Titel
Electrochemical and Spectroscopic Study on the Corrosion of Ti–5Al and Ti–5Al–5Cu in Chloride Solutions
verfasst von
El-Sayed M. Sherif
Fahamsyah H. Latief
Hany S. Abdo
Nabeel H. Alharthi
Publikationsdatum
30.05.2019
Verlag
The Korean Institute of Metals and Materials
Erschienen in
Metals and Materials International / Ausgabe 6/2019
Print ISSN: 1598-9623
Elektronische ISSN: 2005-4149
DOI
https://doi.org/10.1007/s12540-019-00306-2

Weitere Artikel der Ausgabe 6/2019

Metals and Materials International 6/2019 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.