Skip to main content

2019 | OriginalPaper | Buchkapitel

Electrostatic MEMS Switch with Vertical Beams and Body Biasing

verfasst von : Armin Bahmanyaran, Kian Jafari

Erschienen in: Fundamental Research in Electrical Engineering

Verlag: Springer Singapore

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

One of the easiest and the most appropriate solution for fabricating MEMS switch is Electrostatic actuation. However, it requires large parallel plates which can take a large surface on the substrate wafer and thus an expensive fabrication cost. In this paper, an improved electrostatic MEMS switch is presented. The proposed design is carried out so that it minimizes the dimensions of the MEMS device. Simulation results are also done by COMSOL based on the proposed design.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Sinha N, Jones T, Guo Z, Piazza G (2010) Demonstration of low voltage and functionally complete logic operations using body-biased complementary and ultra-thin ALN piezoelectric mechanical switches. In: 2010 IEEE 23rd international conference on micro electro mechanical systems (MEMS), IEEE, pp 751–754 Sinha N, Jones T, Guo Z, Piazza G (2010) Demonstration of low voltage and functionally complete logic operations using body-biased complementary and ultra-thin ALN piezoelectric mechanical switches. In: 2010 IEEE 23rd international conference on micro electro mechanical systems (MEMS), IEEE, pp 751–754
2.
Zurück zum Zitat Akarvardar K, Eggimann C, Tsamados D, Chauhan YS, Wan GC, Ionescu AM, … Wong HSP (2008) Analytical modeling of the suspended-gate FET and design insights for low-power logic. IEEE Trans Electr Dev 55(1):48–59CrossRef Akarvardar K, Eggimann C, Tsamados D, Chauhan YS, Wan GC, Ionescu AM, … Wong HSP (2008) Analytical modeling of the suspended-gate FET and design insights for low-power logic. IEEE Trans Electr Dev 55(1):48–59CrossRef
3.
Zurück zum Zitat Akarvardar K, Elata D, Parsa R, Wan GC, Yoo K, Provine J, … Wong HS (2007) Design considerations for complementary nanoelectromechanical logic gates. In: Electron devices meeting, IEDM 2007, IEEE international, IEEE, pp 299–302 Akarvardar K, Elata D, Parsa R, Wan GC, Yoo K, Provine J, … Wong HS (2007) Design considerations for complementary nanoelectromechanical logic gates. In: Electron devices meeting, IEDM 2007, IEEE international, IEEE, pp 299–302
4.
Zurück zum Zitat Tabib-Azar M, Venumbaka SR, Alzoubi K, Saab D (2010) 1 volt, 1 GHz NEMS switches. In: Sensors, 2010 IEEE, IEEE, pp 1424–1426 Tabib-Azar M, Venumbaka SR, Alzoubi K, Saab D (2010) 1 volt, 1 GHz NEMS switches. In: Sensors, 2010 IEEE, IEEE, pp 1424–1426
5.
Zurück zum Zitat Nathanael R, Pott V, Kam H, Jeon J, Liu TJK (2009) 4-terminal relay technology for complementary logic. In: Electron devices meeting (IEDM), 2009 IEEE international, IEEE, pp 1–4 Nathanael R, Pott V, Kam H, Jeon J, Liu TJK (2009) 4-terminal relay technology for complementary logic. In: Electron devices meeting (IEDM), 2009 IEEE international, IEEE, pp 1–4
6.
Zurück zum Zitat Alzoubi K, Saab DG, Tabib-Azar M (2010) Circuit simulation for nano-electro-mechanical switches VLSI circuits. In: 2010 53rd IEEE international midwest symposium on circuits and systems (MWSCAS), IEEE, pp 1177–1180 Alzoubi K, Saab DG, Tabib-Azar M (2010) Circuit simulation for nano-electro-mechanical switches VLSI circuits. In: 2010 53rd IEEE international midwest symposium on circuits and systems (MWSCAS), IEEE, pp 1177–1180
7.
Zurück zum Zitat Chakraborty S, Chaudhuri AR, Bhattacharyya TK (2009) Design and analysis of MEMS cantilever based binary logic inverter. In: International conference on advances in computing, control and telecommunication technologies, ACT’09, pp 184–188 Chakraborty S, Chaudhuri AR, Bhattacharyya TK (2009) Design and analysis of MEMS cantilever based binary logic inverter. In: International conference on advances in computing, control and telecommunication technologies, ACT’09, pp 184–188
Metadaten
Titel
Electrostatic MEMS Switch with Vertical Beams and Body Biasing
verfasst von
Armin Bahmanyaran
Kian Jafari
Copyright-Jahr
2019
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-10-8672-4_78

Neuer Inhalt