nach oben

Metallurgist

Erschienen in:

05.04.2021

Elevation of the Wear Resistance of Roller Dies for the Production of Wires from Titanium Alloys

verfasst von: L. V. Radionova, M. N. Samodurova, A. E. Sarafanov, V. A. Bykov, L. A. Glebov, K. Yu. Pashkeev

Erschienen in: Metallurgist | Ausgabe 11-12/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

We propose a technology of hardening of the working surfaces of the rollers of dies intended for the treatment of titanium alloys. The detonation deposition of the WC–10Co–4Cr alloy with a thickness of 600 μm and subsequent fusion of this layer with the help of a laser make it possible to increase the hardness of the working layer up to 1057 HV (> 67 HRC). In this case, the wear resistance becomes more than seven times higher as compared with the case of traditional thermal treatment applied for Kh12MFsteel.

Vorheriger Artikel Influence of Preliminary Heat Treatment of Vanadium Sludges on the Manufacturability of their Processing

Nächster Artikel Impurity Distribution During Electrolytic Refining of Antimony

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

B. B. Chechulin, S. S. Ushkov, and I. N. Razuvaev, Titanium Alloys in Mechanical Engineering [in Russian], Mashinostroenie, Leningrad (1977).

A. V. Kop’ev, Resource-Saving Technological Processes of Rolling of Wires in a Continuous Mill with Four-Roll Passes [in Russian], Candidate-Degree Thesis (Engineering) Magnitogorsk (2001).

G. S. Khayak, Drawing of Wire from Nonferrous Metals and Alloys [in Russian], Metallurgiya, Moscow (1967).

A. S. Anishchenko, “Drawing of titanium wires under isothermal conditions,” Vopr. Materialoved., Issue 2, 45–53 (1995).

V. I. Lepekhov, A. S. Anishchenko, and G. S. Lupandin, “Improvement of the technology of isothermal drawing of titanium wires,” Visn. Pryazov. Derzh. Tekh. Univ.: Zbir. Nauk. Prats,’ Issue 2, 74–76 (1996).

A. A. Shter, Yu. N. Popov, and B. V. Barichko, “Production of wires and shapes from titanium-based alloys in roller dies,” in: Treatment of Solid and Layered Materials: Interuniversity Collection of Scientific Works [in Russian], Magnitogorsk State Technical University, Magnitogorsk (1999), pp. 88–92.

A. P. Grudev, Yu. V. Zil’berg , and V. T. Tilik, Friction and Lubricants in Plastic Metal Working [in Russian], Metallurgiya, Moscow (1982).

A. V. Vydrin, B. V. Barichko, and V. S. Barichko, “Development of the rational conditions of deformation of metals in roller dies with the use of the methods of modeling in: Proc. of the 6th Congr. of Rolling Experts [in Russian], “Chermetinformatsiya” LLC, Moscow (2005), pp. 475–480.

L. V. Radionova and A. A. Radionov, “Current state and prospects of the development of drawing production of steel wires,” Mashinostroen.: Setev. Élektr. Nauch. Zh., No. 1, 3–11 (2013).

10.

V. S. Slavin, Roller Dies of the Housingless Type: A Monograph [in Russian], Magnitogorsk State University, Magnitogorsk (2010).

11.

S. I. Yares’ko, “Improvement the operating characteristics of hard-alloy tools by laser treatment,” Fiz. Khim. Obrab. Mater., No. 5, 18–22 (2003).

12.

I. N. Stepankin, E. P. Pozdnyakov, and E. A. Astapov, “On the problem of structure formation and hardness of Kh12M semi-heatresistant steel by the methods of thermal and chemicothermal treatment,” Vest. Polotsk. Gos. Univ., Ser. B, No. 3, 107–114 (2016).

13.

M. A. Filippov, M. A. Gervas’ev, G. N. Plotnikov, A. S. Zhilin, and S. M. Nikiforova, “Formation of structure of wear-resistant steels 150KhNML and Kh12MFL upon hardening,” Metalloved. Term. Obrab. Met., 11, 5–9 (2015); English translation: Met. Sci. Heat Treat., 57, Issues 11–12, 641–644 (2016); DOI: https://doi.org/10.1007/s11041-016-9935-5.

14.

А. Е. Sarafanov, L. V. Radionova, I. N. Erdakov, and M. A. Zhludov, “Design, principle of operation of a unit, and the procedure of testing for abrasive wear-resistance,” Mashinostroen.: Setev. Élektr. Nauch. Zh., 8, No. 2, 8–11 (2020); DOI: https://doi.org/10.24892/RIJIE/20200202.CrossRef

15.

M. Samodurova, L. Radionova, and R. Zakirov, “A study of the structural characteristics of titanium alloy products manufactured using additive technologies by combining the selective laser melting and direct metal deposition methods,” Materials, 12, No. 19 (2019); DOI: https://doi.org/10.3390/ma12193269.

16.

M. Samodurova, L. Radionova, and R. Zakirov, “A study of characteristics of aluminum bonze coatings applied to steel using additive technologies,” Materials, 13, No. 461 (2020); DOI: https://doi.org/10.3390/ma13020461.

17.

CASTOLIN EUTECTIC [Electronic Resource]: Official Internet Site. URL: https://www.castolin.com/ (Date of access 09.04.2020).

18.

V. A. Bykov, L. V. Radionova, and M. N. Samodurova, “Reconstruction of a plunger pair by detonation spraying of a functional coating,” in: Proc. of the 6th Internat. Sci.-Pract. Conf. of Young Scientists and Students [in Russian], Donetsk (2020), pp. 200–203.

Titel: Elevation of the Wear Resistance of Roller Dies for the Production of Wires from Titanium Alloys
verfasst von: L. V. Radionova
M. N. Samodurova
A. E. Sarafanov
V. A. Bykov
L. A. Glebov
K. Yu. Pashkeev
Publikationsdatum: 05.04.2021
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 11-12/2021
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-021-01104-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11-12/2021

Investigation of Mechanical Alloying for Powder Materials Based on Mo–Ti–Zr–C and Mo–Hf–C Systems

Correction to: Improvement of a Set of 13Cr11Ni2W2MoV Steel Mechanical Properties for Critical Components of Stop Valves of Oil and Gas Pipelines Using Intercritical Quenching

Evaluation of Flux Addition as a Possible Means of Preventing Concentrate from Freezing

Effect of the Slag Layer Thickness, Gas Composition, and Furnace Capacity on the Arc Efficiency and Heat Transfer in Arc Furnaces. Part II. Effect of the Slag Thickness on the Magnitude of Arc Heat Radiation Incident to the Walls

Opening of Sulfide Gold-Bearing Ores using Nanosecond Electromagnetic Pulses in Aqueous Medium

Influence of Preliminary Heat Treatment of Vanadium Sludges on the Manufacturability of their Processing

Premium Partner

Marktübersichten