Top

Published in:

2017 | OriginalPaper | Chapter

5. 3-Dimensional Printing: Interventional Capacities in the Global Health Arena

Authors : Sujata K. Bhatia, Krish W. Ramadurai

Published in: 3D Printing and Bio-Based Materials in Global Health

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The global health arena surmises the entire span of our world and its human populous. This “arena” contains the entirety of our human population and with that population, the health threats that constantly shape our future. In acknowledging the global arena for which we find ourselves in, it is important that the innovations and technologies rendered to help our fellow man are also available to all within the confines of this metaphysical arena. Innovations in science, technology, and medicine must not be available to only a segment of individuals who understand and can harness it. Rather, it is within the adaptability complex of these innovations that the true essence of “innovation” comes to fruition.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter 3-Dimensional Printing of Medical Devices and Supplies

3D Matter. (2016, February 16). What is the influence of infill percentage, layer height and infill pattern on my 3D prints? Retrieved January 3, 2017 from http://my3dmatter.com/influence-infill-layer-height-pattern/#more-95

3D Printing and Prosthetics. (2017, February 10). Retrieved March 12, 2017 from https://believe3dprinting.com/3d-printing-prosthetics/

Bender, K., Chartoff, H., & Hoppe, M. (2014). Printing prosthetic solutions: Providing 3-D printed trans-tibial prosthetic sockets to Northern Uganda Amputees.

Dotz, A. D. (2015). A pilot of 3D printing of medical devices in Haiti. In Technologies for development (pp. 33–44). Springer International Publishing.

Engel, C. (2014, December 23). 3D Printing—A revolution capable of changing the supply chain of the medical industry. Retrieved July 25, 2016 from http://www.slideshare.net/carstenengel/3d-printing-a-revolution-capable-of-changing-the-supply-chain-of-the-medical-industry

Goodman, C. S. (2004). Introduction to health technology assessment. Virginia, USA: The Lewin Group.

Henry, J. A., Orgoi, S., Govind, S., Price, R. R., Lundeg, G., & Kehrer, B. (2012). Strengthening surgical services at the soum (first-referral) hospital: The WHO emergency and essential surgical care (EESC) program in Mongolia. World Journal of Surgery, 36(10), 2359–2370.CrossRef

Hostettler, S. (2015). Technologies for development. Springer.

Howie, S. R., Hill, S. E., Peel, D., Sanneh, M., Njie, M., Hill, P. C., … & Adegbola, R. A. (2008). Beyond good intentions: Lessons on equipment donation from an African hospital. Bulletin of the World Health Organization, 86(1), 52–56.

Howitt, P., Darzi, A., Yang, G. Z., Ashrafian, H., Atun, R., Barlow, J., … & Cooke, G. S. (2012). Technologies for global health. The Lancet, 380(9840), 507–535.

Ibrahim, A. M., Jose, R. R., Rabie, A. N., Gerstle, T. L., Lee, B. T., & Lin, S. J. (2015). Three-dimensional Printing in Developing Countries. Plastic and Reconstructive Surgery Global Open, 3(7).

Jones, A. (2013). Medical equipment donated to developing nations usually ends up on the junk heap. Scientific American.

Jones, R., Haufe, P., Sells, E., Iravani, P., Olliver, V., Palmer, C., et al. (2011). RepRap–The replicating rapid prototyper. Robotica, 29(01), 177–191.CrossRef

King, D. L., & Babasola, A. (2014). Mobile open-source solar-powered 3-D printers for distributed manufacturing in off-grid communities. Challenges in Sustainability, 2(1), 18.CrossRef

Krassenstein, E. (2015, February 12). University of Toronto brings 3D printed prosthetic legs to children in Uganda. Retrieved December 17, 2016 from https://3dprint.com/44123/3d-printed-prosthetics-uganda/

Kreiger, M., & Pearce, J. M. (2013). Environmental life cycle analysis of distributed three-dimensional printing and conventional manufacturing of polymer products. ACS Sustainable Chemistry & Engineering, 1(12), 1511–1519.CrossRef

Matisons, M. (2015, November 30). 3D Printed models help doctors to treat brain tumors–and patients to understand them. Retrieved January 9, 2017, from https://3dprint.com/108213/ultimaker-2-brain-tumor-models/

Meara, J. G., Leather, A. J., Hagander, L., Alkire, B. C., Alonso, N., Ameh, E. A., … & Mérisier, E. D. (2015). Global Surgery 2030: Evidence and solutions for achieving health, welfare, and economic development. The Lancet, 386(9993), 569–624.

Perry, L., & Malkin, R. (2011). Effectiveness of medical equipment donations to improve health systems: How much medical equipment is broken in the developing world?

Pizzi, M. (2016, February 22). Survey: 54 percent in developing world use Internet. Retrieved January 5, 2017 from http://america.aljazeera.com/articles/2016/2/22/study-54-percent-in-developing-world-use-internet.html

Rankin, T. M., Giovinco, N. A., Cucher, D. J., Watts, G., Hurwitz, B., & Armstrong, D. G. (2014). Three-dimensional printing surgical instruments: Are we there yet? Journal of Surgical Research, 189(2), 193–197.CrossRef

Refuge Open War: The Mission. (2017). Retrieved March 14, 2017 from http://www.row3d.org/

Shrinking the Supply Chain: Hyperlocal Manufacturing and 3D printing in Humanitarian Response. (2015, August 10). Retrieved February 12, 2017 from http://www.unocha.org/node/190261

Surgeons extract tumor in a child in an operation with a 3D model. (2014, July 02). Retrieved March 6, 2017 from http://www.elperiodico.cat/ca/noticias/sanitat/cirurgians-sant-joan-deu-extirpen-tumor-nen-una-operacio-amb-una-maqueta-3346842

Van Wijk, A. J. M., & Van Wijk, I. (2015). 3D printing with biomaterials: Towards a sustainable and circular economy. IOS press.

Ventola, C. L. (2014). Medical applications for 3D printing: Current and projected uses. PT, 39(10), 704–711.

Wong, J. Y. (2015). Ultra-portable solar-powered 3D printers for onsite manufacturing of medical resources. Aerospace medicine and human performance, 86(9), 830–834.CrossRef

World Health Organization. (2010). Medical devices: Managing the mismatch: An outcome of the priority medical devices project. World Health Organization.

Zelenika, I., & Pearce, J. M. (2011). Barriers to appropriate technology growth in sustainable development. Journal of Sustainable Development, 4(6), 12.CrossRef

Title: 3-Dimensional Printing: Interventional Capacities in the Global Health Arena
Authors: Sujata K. Bhatia
Krish W. Ramadurai
Publisher: Springer International Publishing
Book: 3D Printing and Bio-Based Materials in Global Health
Print ISBN: 978-3-319-58276-4

Electronic ISBN: 978-3-319-58277-1

Copyright Year: 2017
DOI: https://doi.org/10.1007/978-3-319-58277-1_5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners