Top

The International Journal of Advanced Manufacturing Technology

Published in:

29-01-2020 | ORIGINAL ARTICLE

A cloud-based resource planning tool for the production and installation of industrial product service systems (IPSS)

Authors: Dimitris Mourtzis, Evagoras Zervas, Nikoletta Boli, Pietro Pittaro

Published in: The International Journal of Advanced Manufacturing Technology | Issue 11-12/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Industries nowadays try their best to remain competitive in a manufacturing world that undergoes a digital transformation driven by smart technology and connected devices. Profit margins quickly shift from products to services, and thus the manufacturing sector industries try to shift from offering products to offering industrial product service systems (IPSS) in order to keep up to date and ensure their market position and economic success. IPSS is a well-rounded solution consisting of the tangible part which is the product and an intangible one being the service. IPSS are efficient and beneficiary not only for the provider but also for the user and even the environment. IPSS is not a simple process of adding services to traditional products but a rather more complex integration process of the mechanical product, sensors, and IoT and software, which are coupled with supportive systems (resources and infrastructures) and the involvement of heterogeneous stakeholders. Due to the high complexity involved in the development and production process of IPSS, tools for IPSS production planning and installation in a dynamic and collaborative environment are extremely essential for manufacturing firms, but they are however absent. In this paper, a methodology for conducting resource planning for the production and installation of IPSS is proposed, and according to this, the architecture of a cloud-based tool is developed. A real-life pilot case from a laser and sheet metal machinery production industry is presented where the developed tool was tested and validated upon its results.

previous article Processing of poly-l-lactide and poly(l-lactide-co-trimethylene carbonate) blends by fused filament fabrication and fused granulate fabrication using RepRap 3D printer

next article An optimization approach for setup planning and operation sequencing with tolerance constraints

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Hofmann E, Rüsch M (2017) Industry 4.0 and the current status as well as future prospects on logistics. Comput Ind 89:23–34. https://doi.org/10.1016/j.compind.2017.04.002 CrossRef

Bortolini M, Ferrari E, Gamberi M et al (2017) Assembly system design in the industry 4.0 era: a general framework. IFAC PapersOnLine 50:5700–5705. https://doi.org/10.1016/j.ifacol.2017.08.1121 CrossRef

Kagermann H, Wahlster W, Helbig J, et al (2013) Recommendations for implementing the strategic initiative INDUSTRIE 4.0. Final report of the Industry 4.0 working group

Lee J, Kao HA, Yang S (2014) Service innovation and smart analytics for industry 4.0 and big data environment. Procedia CIRP 16:3–8. https://doi.org/10.1016/j.procir.2014.02.001 CrossRef

Davies R (2015) Industry 4.0 digitalisation for productivity and growth, briefing for the European Parliament (PE 568.337) September 2015. European parliamentary research service

“INDUSTRY 4.0”—TOWARDS OPPORTUNITIES AND CHALLENGES OF IMPLEMENTATION. Available from: https://www.researchgate.net/publication/322449256_INDUSTRY_40-TOWARDS_OPPORTUNITIES_AND_CHALLENGES_OF_IMPLEMENTATION. Accessed Oct 25 2019

Yao X, Lin Y (2016) Emerging manufacturing paradigm shifts for the incoming industrial revolution. Int J Adv Manuf Technol 85:1665–1676. https://doi.org/10.1007/s00170-015-8076-0 CrossRef

Lasi H, Fettke P, Kemper HG et al (2014) Industry 4.0. Bus Inf Syst Eng 6:239–242. https://doi.org/10.1007/s12599-014-0334-4 CrossRef

Bloomberg J (2018) Digitization, Digitalization, And Digital Transformation: Confuse Them At Your Peril. Forbes

10.

Porter ME, Heppelmann JE (2015) How Smart, connected products are transforming companies www.hbr.org 2 how smart, connected products are transforming companies. Harvard bussiness rev 1–9. https://doi.org/10.1017/CBO9781107415324.004

11.

Lenka S, Vinit P, Wincent J (2017) Digitalization capabilities as enablers of value co-creation in servitizing firms. Psychol Mark 34:92–100. https://doi.org/10.1002/mar.20975 CrossRef

12.

Vandermerwe S, Rada J (1988) Servitization of business: adding value by adding services. Eur Manag J 6:315–324

13.

Lightfoot H, Baines T, Smart P et al (2013) Trends the servitization of manufacturing a systematic literature review of interdependent trends. Int J Oper Prod Manag 33:1408–1434. https://doi.org/10.1108/IJOPM-07-2010-0196 CrossRef

14.

Sousa-zomer TT, Miguel PAC (2016) A QFD-based approach to support sustainable product-service systems conceptual design. Int J Adv Manuf Technol 88:701–717. https://doi.org/10.1007/s00170-016-8809-8 CrossRef

15.

Mourtzis D, Fotia S, Boli N, Pittaro P (2018) Product-service system (PSS) complexity metrics within mass customization and industry 4. 0 environment. Int J Adv Manuf Technol 97:91–103CrossRef

16.

Baines T, Lightfoot H, Benedetinni O, Kay JM (2009) The servitization of manufacturing: a review of literature and reflection of future challenges. J Manuf Technol Manag 20:547–567. https://doi.org/10.1108/17410380910960984 CrossRef

17.

Economics IJP, Rymaszewska A, Helo P, Gunasekaran A (2017) IoT powered servitization of manufacturing – an exploratory case study. Int J Prod Econ 192:92–105. https://doi.org/10.1016/j.ijpe.2017.02.016 CrossRef

18.

Mont OK (2002) Clarifying the concept of product – service system. J Clean Prod 10:237–245CrossRef

19.

Erkoyuncu JA, Roy R, Shehab E, Cheruvu K (2011) Understanding service uncertainties in industrial product-service system cost estimation. Int J Adv Manuf Technol 52:1223–1238. https://doi.org/10.1007/s00170-010-2767-3 CrossRef

20.

Beuren FH, Gitirana M, Ferreira G, Miguel PAC (2013) Product-service systems: a literature review on integrated products and services. J Clean Prod 47:222–231. https://doi.org/10.1016/j.jclepro.2012.12.028 CrossRef

21.

Goedkoop MJ, van Halen CJG, te Riele HRM, Rommens PJM (1999) Product service systems, Ecological and Economic Basics

22.

Baines TS, Lightfoot H, Steve E et al (2007) State-of-the-art in product service-systems. J Eng Manuf 221:1543–1552. https://doi.org/10.1243/09544054JEM858 CrossRef

23.

Kuo TC, Ma H, Huang SH (2010) Barrier analysis for product service system using interpretive structural model. Int J Adv Manuf Technol 49:407–417. https://doi.org/10.1007/s00170-009-2399-7 CrossRef

24.

Gaiardelli P, Resta B, Martinez V et al (2014) A classification model for product-service offerings. J Clean Prod 66:507–519. https://doi.org/10.1016/j.jclepro.2013.11.032 CrossRef

25.

Meier H, Roy R, Seliger G (2010) CIRP annals - manufacturing technology industrial product-service systems — IPS 2. CIRP Ann Manuf Technol 59:607–627. https://doi.org/10.1016/j.cirp.2010.05.004 CrossRef

26.

Park H, Yoon J (2015) A chance discovery-based approach for new product–service system (PSS) concepts. Serv Bus 9:115–135. https://doi.org/10.1007/s11628-013-0222-x MathSciNetCrossRef

27.

Huang GQ, Qu T, Zhong RY, Li Z, Yang HD, Zhang YF, Chen QX, Jiang PY, Chen X (2011) Establishing production service system and information collaboration platform for mold and die products. Int J Adv Manuf Technol 52:1149–1160. https://doi.org/10.1007/s00170-010-2762-8 CrossRef

28.

Wuest T, Wellsandt S (2016) Design and development of product service systems (PSS) - impact on product life cycle perspective. Procedia Technol 26:152–161. https://doi.org/10.1016/j.protcy.2016.08.021 CrossRef

29.

Wiesner S, Freitag M, Westphal I, Thoben K (2015) Interactions between service and product life cycle management. Procedia CIRP 30:36–41. https://doi.org/10.1016/j.procir.2015.02.018 CrossRef

30.

Schweitzer E, Aurich JC (2010) Continuous improvement of industrial product-service systems. CIRP J Manuf Sci Technol 3:158–164. https://doi.org/10.1016/j.cirpj.2010.04.002 CrossRef

31.

Durugbo C, Tiwari A, Alcock JR (2011) A review of information flow diagrammatic models for product – service systems. Int J Adv Manuf Technol 52:1193–1208. https://doi.org/10.1007/s00170-010-2765-5 CrossRef

32.

Meier H, Völker O, Funke B (2011) Industrial product-service systems (IPS2): paradigm shift by mutually determined products and services. Int J Adv Manuf Technol 52:1175–1191. https://doi.org/10.1007/s00170-010-2764-6 CrossRef

33.

Schuh G, Prote JP, Luckert M, Hünnekes P (2017) Knowledge discovery approach for automated process planning. Procedia CIRP 63:539–544. https://doi.org/10.1016/j.procir.2017.03.092 CrossRef

34.

Hees A, Reinhart G (2015) Approach for production planning in reconfigurable manufacturing systems. Procedia CIRP 33:70–75. https://doi.org/10.1016/j.procir.2015.06.014 CrossRef

35.

Meier H, Völker O, Funke B (2011) Industrial Product-Service Systems (IPS2). Int J Adv Manuf Technol 52:1175 -1191. https://doi.org/10.1007/s00170-010-2764-6 CrossRef

36.

Sakao T, Paulsson S, Müller P (2011) Integrated Evaluation of a PSS Business Case and a PSS Design Method - Application of the PSS Layer Method to an industrial Drilling Solution. Functional Thinking for Value Creation 153–158. Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-19689-8

37.

Alexopoulos K, Koukas S, Boli N, Mourtzis D (2017) Resource Planning for the Installation of Industrial Product Service Systems. In: Lodding H, Riedel R, Thoben KD et al (eds) Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing. APMS 2017. IFIP advances in information and communication technology. Springer, Cham, 514:205–213. Springer, Cham. https://doi.org/10.1007/978-3-319-66926-7_24 CrossRef

38.

Doukas M, Psarommatis F, Mourtzis D (2014) Planning of manufacturing networks using an intelligent probabilistic approach for mass customised products. Int J Adv Manuf Technol 74:1747–1758. https://doi.org/10.1007/s00170-014-6121-z CrossRef

39.

Michalos G, Makris S, Mourtzis D (2012) An intelligent search algorithm-based method to derive assembly line design alternatives. Int J Comput Integr Manuf 25:211–229. https://doi.org/10.1080/0951192X.2011.627949 CrossRef

Title: A cloud-based resource planning tool for the production and installation of industrial product service systems (IPSS)
Authors: Dimitris Mourtzis
Evagoras Zervas
Nikoletta Boli
Pietro Pittaro
Publication date: 29-01-2020
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 11-12/2020
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-04746-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11-12/2020

Experimental and numerical investigations on size effect of friction in meso-/micro-forming without lubricant

Stiffness properties analysis and enhancement in robotic drilling application

Attainment of high corner accuracy for thin-walled sharp-corner part by WEDM based on magnetic field-assisted method and parameter optimization

An improved machine tool volumetric error compensation method based on linear and squareness error correction method

An efficient method to predict the chatter stability of titanium alloy thin-walled workpieces during high-speed milling by considering varying dynamic parameters

Sensor placement methodology for spindle thermal compensation of machine tools

Premium Partners