Top

Published in:

2021 | OriginalPaper | Chapter

A Comprehensive Review on Composite Materials, Applications and Future Challenges of Friction Welding

Authors : Sukhdeep Singh, Jasgurpreet Singh Chohan, Gurpreet Singh, Shubham Sharma

Published in: Additive and Subtractive Manufacturing of Composites

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Friction Welding (FW) is an efficient and reliable joining process which has potential to encounter challenges by composite materials having widely variable physical characteristics. This paper presents a detailed review on the composite materials, critical parameters, response parameters, optimization studies and future prospects of friction welding. It was observed that FW has several benefits over conventional types in context with environment, economical and performance aspects. FW has wide applications in industries like aerospace, marine, shaft fabrication, rods, pipes on almost all metals and composites. In addition to this, square bars can also be welded using this technique. From a performance point of view, it was observed that the process parameters that affect the performance of FW were speed, friction pressure or axial force, welding time etc. The bond strength directly depends upon the axial force applied; welding time has major influence on hardness and burn off length but it does alter the tensile strength and bending strength. Furthermore, welding time is inversely proportional to the fatigue limits and tensile strength. The review acts as torch bearer for potential researchers working in similar areas. The scope of hybrid welding can be extended to industry 4.0 through an autonomous control system.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

next chapter Influence of Reinforcement Contents and Turning Parameters on the Machining Behaviour of Al/SiC/Cr Hybrid Aluminium Matrix Composites

Acharya U, Roy BS, Saha SC (2020) Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint. Defence Technol 16(2). https://doi.org/10.1016/j.dt.2019.08.017

Adalarasan R, Sundaram AS (2015) Parameter design in friction welding of Al/SiC/Al₂O₃ composite using grey theory based principal component analysis (GT-PCA). J Braz Soc Mech Sci Eng 37(5). https://doi.org/10.1007/s40430-014-0294-0

Ahmed N (2005) New developments in advanced welding. In: New Developments in Advanced Welding. https://doi.org/10.1533/9781845690892

Ajith PM, Barik BK, Sathiya P, Aravindan S (2015a) Multiobjective optimization of friction welding of UNS S32205 duplex stainless steel. Defence Technol 11(2). https://doi.org/10.1016/j.dt.2015.03.001

Ajith PM, Husain TMAFSAL, Sathiya P, Aravindan S (2015b) Multi-objective optimization of continuous drive friction welding process parameters using response surface methodology with intelligent optimization algorithm. J Iron Steel Res Int 22(10). https://doi.org/10.1016/S1006-706X(15)30096-0

Alves EP, Neto FP, An CY, da Silva EC (2012) Experimental determination of temperature during rotary friction welding of AA1050 aluminum with AISI 304 stainless steel. J Aerosp Technol Manage 4(1). https://doi.org/10.5028/jatm.2012.04013211

Ambroziak A, Korzeniowski M, Kustroń P (2007) Friction welding of dissimilar metal joints with intermediate layers. J Achievement Mater Manuf Eng 21(2)

Ambroziak A (2010) Friction welding of titanium-tungsten pseudoalloy joints. J Alloys Compd 506(2). https://doi.org/10.1016/j.jallcom.2010.07.062

Ambroziak A, Korzeniowski M, Kustroń P, Winnicki M, Sokołowski P, Harapińska E (2014) Friction welding of aluminium and aluminium alloys with steel. Adv Mater Sci Eng 2014.https://doi.org/10.1155/2014/981653

10.

Anitha P, Majumder MC, Saravanan V, Rajakumar S (2018) Effects of friction pressure and friction time on the mechanical and microstructure properties of friction welded IN718 and SS410 dissimilar joints. J Adv Microsc Res 13(2). https://doi.org/10.1166/jamr.2018.1381

11.

Arivazhagan N, Singh S, Prakash S, Reddy GM (2011) Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding. Mater Des 32(5). https://doi.org/10.1016/j.matdes.2011.01.037

12.

Ashok Kumar CN, Deivanathan R (2012) Effect of aluminium alloy and mild steel on the productivity in sheet metal forming processes. Appl Mech Mater 234.https://doi.org/10.4028/www.scientific.net/AMM.234.64

13.

Biswas P, Mandal NR (2009) Experimental study on friction stir welding of marine grade aluminum alloy. J Ship Prod 25(1). https://doi.org/10.5957/jsp.2009.25.1.21

14.

Caligulu U, Acik M, Balalan Z, Kati N (2015) The effects of process parameters for joining of AISI 1010-Cu alloys by friction welded. Int J Steel Struct 15(4). https://doi.org/10.1007/s13296-015-1213-7

15.

Chaturvedi MC (2011) Welding and joining of aerospace materials. In: Welding and joining of aerospace materials. https://doi.org/10.1533/9780857095169

16.

da Silva AAM, Meyer A, dos Santos JF, Kwietniewski CEF, Strohaecker TR (2004) Mechanical and metallurgical properties of friction-welded TiC particulate reinforced Ti-6Al-4V. Compos Sci Technol 64(10–11). https://doi.org/10.1016/j.compscitech.2003.10.017

17.

Faes K, Dhooge A, De Baets P, Afschrift P (2009) New friction welding process for pipeline girth welds-welding time optimisation. Int J Adv Manuf Technol 43(9–10). https://doi.org/10.1007/s00170-008-1775-z

18.

Fuji A, North TH, Ameyama K, Futamata M (1992) Improving tensile strength and bend ductility of titanium/AlSI 304L stainless steel friction welds. Mater Sci Technol (United Kingdom) 8(3). https://doi.org/10.1179/mst.1992.8.3.219

19.

Hamade RF, Andari TR, Ammouri AH, Jawahir IS (2019) Rotary friction welding versus fusion butt welding of plastic pipes—feasibility and energy perspective. Procedia Manuf 33. https://doi.org/10.1016/j.promfg.2019.04.087

20.

Handa A, Chawla V (2014) An investigation on the effect of axial pressures on the mechanical properties of friction welded dissimilar steels. Adv Mech Eng 2014.https://doi.org/10.1155/2014/639378

21.

Handa A, Chawla V (2016) Experimental evaluation of mechanical properties of friction welded dissimilar steels under varying axial pressures. Strojnicky Cas 66(1). https://doi.org/10.1515/scjme-2016-0008

22.

Haribabu S, Cheepu M, Tammineni L, Gurasala NK, Devuri V, Kantumuchu VC (2019) Dissimilar friction welding of AISI 304 austenitic stainless steel and AISI D3 tool steel: mechanical properties and microstructural characterization. In: Lecture Notes in Mechanical Engineering.https://doi.org/10.1007/978-981-13-1780-4_27

23.

Hascalik A, Orhan N (2007) Effect of particle size on the friction welding of Al₂O₃ reinforced 6160 Al alloy composite and SAE 1020 steel. Mater Des 28(1). https://doi.org/10.1016/j.matdes.2005.06.001

24.

He ZB, Peng YY, Yin ZM, Lei XF (2011) Comparison of FSW and TIG welded joints in Al-Mg-Mn-Sc-Zr alloy plates. Trans Nonferrous Metals Soc China (English Edition) 21(8). https://doi.org/10.1016/S1003-6326(11)60915-1

25.

Hussain A, Pasha S (2010) Evaluation of parameters of friction stir welding for aluminum AA6351 alloy. Int J Eng Sci Technol 2(10)

26.

Inkson BJ, Threadgill PL (1998) Friction welding of FeAl40 Grade 3 ODS alloy. Mater Sci Eng A 258(1–2). https://doi.org/10.1016/s0921-5093(98)00950-2

27.

Srivastava AK, Sharma A (2017) Advances in joining and welding technologies for automotive and electronic applications. Am J Mater Eng Technol 5(1). https://doi.org/10.12691/materials-5-1-2

28.

Khidhir GI, Baban SA (2019) Efficiency of dissimilar friction welded 1045 medium carbon steel and 316L austenitic stainless steel joints. J Mater Res Technol 8(2). https://doi.org/10.1016/j.jmrt.2019.01.010

29.

Kimura M, Kusaka M, Kaizu K, Fuji A (2009) Effect of friction welding condition on joining phenomena and tensile strength of friction welded joint between pure copper and low carbon steel. J Solid Mech Mater Eng 3(2). https://doi.org/10.1299/jmmp.3.187

30.

Kishta EE, Darras B (2016) Experimental investigation of underwater friction-stir welding of 5083 marine-grade aluminum alloy. Proc Inst Mech Eng Part B: J Eng Manuf 230(3). https://doi.org/10.1177/0954405414555560

31.

Kozyrev NA, Usol’tsev AA, Shevchenko RA, Kryu-Kov RE, Shishkin PE (2017) Modern welding methods of the rails of new generation. Izv Ferrous Metall 60(10). https://doi.org/10.17073/0368-0797-2017-10-785-791

32.

Kumar K, Kailas SV (2008) On the role of axial load and the effect of interface position on the tensile strength of a friction stir welded aluminium alloy. Mater Des 29(4). https://doi.org/10.1016/j.matdes.2007.01.012

33.

Kumar R, Singh R, Ahuja IPS, Amendola A, Penna R (2018) Friction welding for the manufacturing of PA6 and ABS structures reinforced with Fe particles. Compos Part B: Eng 132. https://doi.org/10.1016/j.compositesb.2017.08.018

34.

Lee HS (2017) Application of solid state welding and superplastic forming to aerospace vehicles. SAE Technical Papers, 2017-September. https://doi.org/10.4271/2017-01-2148

35.

Lee WB, Jung SB (2004) The joint properties of copper by friction stir welding. Mater Lett 58(6). https://doi.org/10.1016/j.matlet.2003.08.014

36.

Lei X, Deng Y, Yin Z, Xu G (2014) Tungsten inert gas and friction stir welding characteristics of 4-mm-thick 2219-T87 plates at room temperature and −196 °C. J Mater Eng Perform 23(6). https://doi.org/10.1007/s11665-014-1013-9

37.

Leśniewski J, Ambroziak A (2015) Modelling the friction welding of titanium and tungsten pseudoalloy. Arch Civ Mech Eng 15(1). https://doi.org/10.1016/j.acme.2014.06.008

38.

Li WY, Ma TJ, Yang SQ, Xu QZ, Zhang Y, Li JL, Liao HL (2008) Effect of friction time on flash shape and axial shortening of linear friction welded 45 steel. Mater Lett 62(2). https://doi.org/10.1016/j.matlet.2007.05.037

39.

Li X, Li J, Jin F, Xiong J, Zhang F (2018) Effect of rotation speed on friction behavior of rotary friction welding of AA6061-T6 aluminum alloy. Weld World 62(5). https://doi.org/10.1007/s40194-018-0601-y

40.

Liao J, Yamamoto N, Liu H, Nakata K (2010) Microstructure at friction stir lap joint interface of pure titanium and steel. Mater Lett 64(21). https://doi.org/10.1016/j.matlet.2010.07.049

41.

Lin CB, Mu CK, Wu WW, Hung CH (1999) Effect of joint design and volume fraction on friction welding properties of A360/SiC (p) composites. Weld J (Miami, Fla) 78(3)

42.

Maalekian M (2007) Friction welding—critical assessment of literature. Sci Technol Weld Joining 12(8). https://doi.org/10.1179/174329307X249333

43.

Manufacturing Engineer’s Reference Book (1993) Manufacturing engineer’s reference book. https://doi.org/10.1016/c2009-0-24956-7

44.

Mercan S, Aydin S, Özdemir N (2015) Effect of welding parameters on the fatigue properties of dissimilar AISI 2205-AISI 1020 joined by friction welding. Int J Fatigue 81. https://doi.org/10.1016/j.ijfatigue.2015.07.023

45.

Meshram SD, Mohandas T, Reddy GM (2007) Friction welding of dissimilar pure metals. J Mater Process Technol 184(1–3). https://doi.org/10.1016/j.jmatprotec.2006.11.123

46.

Midling OT, Grong (1994) A process model for friction welding of AlMgSi alloys and AlSiC metal matrix composites-I. Haz temperature and strain rate distribution. Acta Metall Mater 42(5):1595–1609. https://doi.org/10.1016/0956-7151(94)90369-7

47.

Miller Welds (2016) The history of welding. Miller Welds 3

48.

De Moraes CAP, Chludzinski M, Nunes RM, Lemos GVB, Reguly A (2019) Residual stress evaluation in API 5L X65 girth welded pipes joined by friction welding and gas tungsten arc welding. J Mater Res Technol 8(1). https://doi.org/10.1016/j.jmrt.2018.07.009

49.

Moreira PMGP, de Figueiredo MAV, de Castro PMST (2007) Fatigue behaviour of FSW and MIG weldments for two aluminium alloys. Theor Appl Fract Mech 48(2). https://doi.org/10.1016/j.tafmec.2007.06.001

50.

Muralimohan CH, Haribabu S, Reddy YH, Muthupandi V, Sivaprasad K (2014) Evaluation of microstructures and mechanical properties of dissimilar materials by friction welding. Procedia Mater Sci 5. https://doi.org/10.1016/j.mspro.2014.07.404

51.

Nicholas ED (2003) Friction processing technologies. Weld World 47(11–12). https://doi.org/10.1007/BF03266402

52.

Norrish J (2006) Advanced welding processes. Adv Weld Process. https://doi.org/10.1533/9781845691707

53.

Ouyang J, Yarrapareddy E, Kovacevic R (2006) Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper. J Mater Process Technol 172(1). https://doi.org/10.1016/j.jmatprotec.2005.09.013

54.

Özdemir N, Sarsilmaz F, Hasçalik A (2007) Effect of rotational speed on the interface properties of friction-welded AISI 304L to 4340 steel. Mater Des 28(1). https://doi.org/10.1016/j.matdes.2005.06.011

55.

Pissanti DR, Scheid A, Kanan LF, Dalpiaz G, Kwietniewski CEF (2019) Pipeline girth friction welding of the UNS S32205 duplex stainless steel. Mater Des 162. https://doi.org/10.1016/j.matdes.2018.11.046

56.

Prater T (2014) Friction stir welding of metal matrix composites for use in aerospace structures. Acta Astronaut 93 https://doi.org/10.1016/j.actaastro.2013.07.023

57.

Radhakrishnan E, Kumaraswamidhas LA, Palanikumar K, Muruganandam D (2019) Strength and hardness studies of C44300 tube to AA7075-T651 tube plate threaded and unthreaded dissimilar joints fabricated by friction welding process. J Mater Res Technol 8(4). https://doi.org/10.1016/j.jmrt.2019.06.008

58.

Rao N, Midhani DGM (2016) Paper on comparision of conventional welding methods with solid-state welding techniques. Int Res J Eng Technol

59.

Ratković N, Arsić D, Lazić V, Nikolić RR, Hadzima B (2016) Micro-structure in the joint friction plane in friction welding of dissimilar steels. Procedia Eng 149.https://doi.org/10.1016/j.proeng.2016.06.686

60.

Saeid T, Abdollah-zadeh A, Assadi H, Malek Ghaini F (2008) Effect of friction stir welding speed on the microstructure and mechanical properties of a duplex stainless steel. Mater Sci Eng A 496(1–2). https://doi.org/10.1016/j.msea.2008.05.025

61.

Sahin M (2010) Joining of aluminium and copper materials with friction welding. Int J Adv Manuf Technol 49(5–8). https://doi.org/10.1007/s00170-009-2443-7

62.

Sami Yilbas B, Sahin AZ (2014) Friction welding: thermal and metallurgical characteristics 123. SpringerBriefs Appl Sci Technol 9783642546068 https://doi.org/10.1007/978-3-642-54607-5

63.

Sathiya P, Aravindan S, Haq AN (2005) Mechanical and metallurgical properties of friction welded AISI 304 austenitic stainless steel. Int J Adv Manuf Technol 26(5–6). https://doi.org/10.1007/s00170-004-2018-6

64.

Sathiya P, Aravindan S, Haq AN, Paneerselvam K (2009) Optimization of friction welding parameters using evolutionary computational techniques. J Mater Process Technol 209(5). https://doi.org/10.1016/j.jmatprotec.2008.06.030

65.

Satyanarayana VV, Reddy GM, Mohandas T (2005) Dissimilar metal friction welding of austenitic-ferritic stainless steels. J Mater Process Technol 160(2). https://doi.org/10.1016/j.jmatprotec.2004.05.017

66.

Sbalchiero JA, Martinazzi D, Lemos GVB, Reguly A, Ramos FD (2018) Replacement of gas metal arc welding by friction welding for joining tubes in the hydraulic cylinders industry. Mater Res 21(4). https://doi.org/10.1590/1980-5373-mr-2018-0015

67.

Singh R, Kumar R, Feo L, Fraternali F (2016) Friction welding of dissimilar plastic/polymer materials with metal powder reinforcement for engineering applications. Compos Part B: Eng 101. https://doi.org/10.1016/j.compositesb.2016.06.082

68.

Sreenivasan KS, Satish Kumar S, Katiravan J (2019) Genetic algorithm based optimization of friction welding process parameters on AA7075-SiC composite. Eng Sci Technol Int J 22(4). https://doi.org/10.1016/j.jestch.2019.02.010

69.

Subbaiah K, Geetha M, Sridhar N, Koteswara Rao SR (2013) Comparison of tungsten inert gas and friction stir welding of AA 5083-H321 aluminum alloy plates. In: ASM Proceedings of the international conference: trends in welding research

70.

Taban E, Kaluc E (2007) Comparison between microstructure characteristics and joint performance of 5086-H32 aluminium alloy welded by MIG, TIG and friction stir welding processes. Kovove Mater 45(5)

71.

Thomas WM, Nicholas ED (1997) Friction stir welding for the transportation industries. Mater Des 18(4–6). https://doi.org/10.1016/s0261-3069(97)00062-9

72.

Uday MB, Ahmad Fauzi MN, Zuhailawati H, Ismail AB (2011) Effect of welding speed on mechanical strength of friction welded joint of YSZ-alumina composite and 6061 aluminum alloy. Mater Sci Eng A 528(13–14). https://doi.org/10.1016/j.msea.2011.02.091

73.

Uday MB, Fauzi MNA, Zuhailawati H, Ismail AB (2010) Advances in friction welding process: a review. Sci Technol Weld Joining 15(7). https://doi.org/10.1179/136217110X12785889550064

74.

Uzkut M, Ünlü B, Yilmaz S, Akdağ M (2010) Friction welding and its applications in today’s world. In: Sarajevo: international symposium on sustainable development

75.

Wanjara P, Jahazi M (2005) Linear friction welding of Ti-6Al-4V: processing, microstructure, and mechanical-property inter-relationships. Metall Mater Trans A Phys Metall Mater Sci 36(8). https://doi.org/10.1007/s11661-005-0335-5

76.

Wen Q, Li W, Patel V, Gao Y, Vairis A (2020) Investigation on the effects of welding speed on Bobbin tool friction stir welding of 2219 aluminum alloy. Metals Mater Int 26(12). https://doi.org/10.1007/s12540-019-00450-9

77.

Yilbas BS, Sahin AZ, Coban A, Abdul Aleem BJ (1995) Investigation into the properties of friction-welded aluminium bars. J Mater Process Tech 54(1–4). https://doi.org/10.1016/0924-0136(95)01923-5

78.

Yilbaş BS, Şahin AZ, Kahraman N, Al-Garni AZ (1995) Friction welding of StAl and AlCu materials. J Mater Process Tech 49(3–4):431–443. https://doi.org/10.1016/0924-0136(94)01349-6

79.

Zhang XP, Quan GF, Wei W (1999) Preliminary investigation on joining performance of SiCp-reinforced aluminum metal matrix composite (Al/SiCp-MMC) by vacuum brazing. Compos Part A Appl Sci Manuf 30(6). https://doi.org/10.1016/S1359-835X(98)00186-9

Title: A Comprehensive Review on Composite Materials, Applications and Future Challenges of Friction Welding
Authors: Sukhdeep Singh
Jasgurpreet Singh Chohan
Gurpreet Singh
Shubham Sharma
Publisher: Springer Singapore
Book: Additive and Subtractive Manufacturing of Composites
Print ISBN: 978-981-16-3183-2

Electronic ISBN: 978-981-16-3184-9

Copyright Year: 2021
DOI: https://doi.org/10.1007/978-981-16-3184-9_1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners