Top

Metal Science and Heat Treatment

Published in:

01-01-2015

A Concept of Carbide Design of Steels with Improved Cold Resistance

Authors: V. I. Gorynin, S. Yu. Kondrat’ev, M. I. Olenin, V. V. Rogozhkin

Published in: Metal Science and Heat Treatment | Issue 9-10/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A concept of structural carbide design of steels at the microlevel is suggested. It is shown that it is possible to control the structural state of the carbide phase in aging after heat refining and thermomechanical treatment of a steel in order to improve its cold resistance. Controlled coagulation of carbides is shown to be an effective means for improving the strength and ductility of structural steels.

previous article A Study of Compaction and Deformation of a Powder Composite Material of the ‘Aluminum – Rare Earth Elements’ System

next article Effect of Thermobaric Treatment on the Nanoporosity and Properties of Amorphous Alloys

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

G. A. Kashchenko, Fundamentals of the Science of Metals [in Russian], Gos. Nauh.-Tekh. Izd. Mashinostr. Liter., Moscow – Leningrad (1959), 395 p.

V. I. Gorynin, M. I. Olenin, N. A. Khlyamkov, and B. T. Timofeev, “Method for transforming the carbide phase—a factor for raising the resistance of structural steels to brittle fracture,” Vopr. Materialoved., No. 1(73), 7 – 19 (2013).

G. V. Kurdyumov, L. M. Utevskii, and R. I. Éntin, Transformations in Iron and Steel [in Russian], Nauka, Moscow (1977), 236 p.

N. P. Kapitonova, A. A. Kroshkin, V. A. Malyshevskii, et al., “A study of the processes of secondary hardening in structural steel of grade 15KhN5MF,” Metallovedenie, No. 13, 10 – 16 (1969).

S. Z. Bokshtein, “Carbide phase in tempering of alloy steel,” Zh. Tekh. Fiz., XIX(5), 532 – 541 (1949).

Yu. I. Ustinovshchikov and O. A. Bannykh, Nature of the Temper Brittleness of Steels [in Russian], Nauka, Moscow (1984), 240 p.

M. I. Olenin, V. I. Gorynin, and M. L. Fedoseev, “Some aspects of raising the cold resistance of steels of perlitic class,” Vopr. Materialoved., No. 2(74), 5 – 12 (2013).

S. T. Kishkin, N. F. Lashko, N. M. Popova, et al., “Application of differentiated carbide analysis to studying the nature of secondary hardening,” Trudy VIAM, Konstr., Nerzhav. Zharoprochn. Stali Splavy, No. 6, 88 – 95 (1957).

N. S. Stoloff, “Effect of alloying on the fracture characteristics,” in: Fracture of Metals [Russian translation], Metallurgiya, Moscow (1979), Vol. 6, pp. 11 – 89.

10.

J. Beaucher, J. Grozier, and J. Enrietto “Strength and toughness of ferrite-perlite steels,” in: Fracture of Metals [Russian translation], Metallurgiya, Moscow (1979), Vol. 6, pp. 246 – 295.

11.

B. M. Mogutnov, I. A. Tomilin, and L. A. Shvartsman, The Thermodynamics of Iron Alloys [in Russian], Metallurgiya, Moscow (1984), 807 p.

12.

G. V. Kurdyumov, L. M. Utevskii, and R. I. Éntin, “Phase transformations in steels,” in: Metallurgy, Steels, Processes [in Russian], Metallurgiya, Moscow (1982), pp. 213 – 223.

13.

S. T. Kishkin and A. A. Klypin, “On the problem of development of the physical theory of ductility and strength of metals,” Dokl. Akad. Nauk SSSR, 216(4), 771 – 773 (1974).

14.

M. I. Olenin, V. I. Gorynin, H. G. Bykovskii, et al., “Optimization of the mode of heat treatment of welded joints from steel 09G2SA-A,” Vopr. Materialoved., No. 2, 18 – 19 (2011).

15.

V. N. Zemzin and R. Z. Shron, Heat Treatment and Properties of Welded Joints [in Russian], Mashinostroenie, Leningrad (1978), 367 p.

16.

M. E. Smagorinskii, A. A. Bulyanda, and S. V. Kudryashov, A Handbook on Thermomechanical and Thermocycling Treatment of Metals [in Russian], Politekhnika, St. Petersburg (1992), 413 p.

17.

I. V. Ganoshenko, O. A. Bagmet, and Yu. I. Matrosov, “Experience of production of sheet steel X80 for gas line pipes 1220 – 1420 mm in diameter at the “MK Azovstal’ ” Company,” in: Rep. Int. Seminar “Modern Steels for Gas and Oil Pipes: Problems and Perspectives” [in Russian], FGUP TsNIIChermet Im. I. P. Bardina, Moscow (2006), pp. 220 – 223.

18.

Yu. D. Morozov, Yu. I. Matrosov, amd L. I. Efron, “New steels of strength category K65 (X80) for pipes of gas mains: development and testing,” in: Rep. Int. Seminar “Modern Steels for Gas and Oil Pipes: Problems and Perspectives” [in Russian], FGUP TsNIIChermet Im. I. P. Bardina, Moscow (2006), pp. 8 – 13.

19.

E. I. Khlusova and V. V. Orlov, “Variation of structure and properties in the heat-affected zone of welded joints from low-carbon ship-building and pipe steels,” Metallurg, No. 9, 63 – 76 (2012).

20.

V. I. Gorynin, S. Yu. Kondrat’ev, and M. I. Olenin, “Raising the resistance of perlitic and martensitic steels to brittle fracture under thermal action on the morphology of the carbide phase,” Metalloved. Term Obrab. Met., No. 10, 22 – 29 (2013).

Title: A Concept of Carbide Design of Steels with Improved Cold Resistance
Authors: V. I. Gorynin
S. Yu. Kondrat’ev
M. I. Olenin
V. V. Rogozhkin
Publication date: 01-01-2015
Publisher: Springer US
Published in: Metal Science and Heat Treatment / Issue 9-10/2015
Print ISSN: 0026-0673
Electronic ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-015-9797-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9-10/2015

Effect of Thermobaric Treatment on the Nanoporosity and Properties of Amorphous Alloys

Formation of Packet (Lath) Martensite in Iron-Nickel Alloys

A Study of the Process of Mechanical Alloying of Iron with Austenite-Forming Elements

Numerical Simulation of Pearlitic Transformation in Steel 45Kh5MF

Transformation of Metastable β-Solid Solution in Alloy VTI-4

Effect of Hot Pressing Modes on the Structure and Properties of an ‘Aluminum – Carbon Nanofibers’ Composite Material

Premium Partners