Top

Acta Mechanica

Published in:

30-06-2020 | Original Paper

A first-principle study of nonlinear large amplitude vibration and global optimization of 3D penta-graphene plates based on the Bees Algorithm

Authors: Ngo Dinh Dat, Tran Quoc Quan, Phuong Tran, Pham Tien Lam, Nguyen Dinh Duc

Published in: Acta Mechanica | Issue 9/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Penta-graphene, a new monolayer of carbon atoms, has been synthesized with ideal strength and temperature resistance. However, the mechanical behavior of penta-graphene has not been fully investigated yet. This paper presents an analytical investigation on the nonlinear large amplitude vibration of imperfect three-dimensional (3D) penta-graphene plates subjected to uniformly distributed external pressure with simply supported and immovable edges in thermal environments. The elastic constants and the thermal expansion coefficients of the 3D penta-graphene plate are determined using the density functional theory. The motion and compatibility equations are established based on the Reddy’s higher-order shear deformation plate theory in which the effect of von Karman nonlinear terms, the initial imperfection and the Pasternak elastic foundation are taken into consideration. The Galerkin method is applied to determine the closed-form expressions of linear frequency and nonlinear to linear frequency ratio while the dynamic response of the plate is obtained by using the fourth-order Runge–Kutta method. The Bees Algorithm is used to determine the optimum value of the natural frequency which depends on five variables including the thickness, the length and the width of penta-graphene plates and two stiffness coefficients of elastic foundations. The numerical results show the effects of width-to-thickness ratio, elastic foundations coefficients, initial imperfection parameter and temperature increment on the nonlinear vibration of the 3D penta-graphene plates.

previous article In-plane transient analysis of two dissimilar nonhomogeneous half-planes containing several interface cracks

next article A Modified Bridge System method to characterize and decouple vehicle–bridge interaction

Available only for authorised users

Bhimaraddi, A.: Large amplitude vibrations of imperfect antisymmetric angle-ply laminated plates. J. Sound Vib. 162, 457–470 (1993). https://doi.org/10.1006/jsvi.1993.1133CrossRefMATH

Lim, C.W., Kitipornchai, S., Liew, K.M.: Numerical aspects for free vibration of thick plates part II: numerical efficiency and vibration frequencies. Comput. Methods Appl. Mech. Eng. 156, 31–44 (1998). https://doi.org/10.1016/S0045-7825(97)00198-9CrossRefMATH

Srinivas, S., Joga Rao, C.V., Rao, A.K.: An exact analysis for vibration of simply-supported homogeneous and laminated thick rectangular plates. J. Sound Vib. 12, 187–199 (1970). https://doi.org/10.1016/0022-460X(70)90089-1CrossRefMATH

Kolahchi, R., Safari, M., Esmailpour, M.: Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium. Compos. Struct. 150, 255–265 (2016). https://doi.org/10.1016/j.compstruct.2016.05.023CrossRef

Wang, Z.X., Shen, H.S.: Nonlinear vibration and bending of sandwich plates with nanotube-reinforced composite face sheets. Compos. B Eng. 43, 411–421 (2012). https://doi.org/10.1016/j.compositesb.2011.04.040CrossRef

Zhou, W., Li, Y., Shi, Z., Lin, J.: An analytical solution for elastic buckling analysis of stiffened panel subjected to pure bending. Int. J. Mech. Sci. 105024, 161–162 (2019). https://doi.org/10.1016/j.ijmecsci.2019.105024CrossRef

Singh, P.N., Sundararajan, V., Das, Y.C.: Large amplitude vibration of some moderately thick structural elements. J. Sound Vib. 36, 375–387 (1974). https://doi.org/10.1016/S0022-460X(74)80217-8CrossRefMATH

Mishra, D., Yoon, S., Seo, Y., Pak, Y.E.: Analytical solutions of electroelastic fields in piezoelectric thin-film multilayer: applications to piezoelectric sensors and actuators. Acta Mech. (2020). https://doi.org/10.1007/s00707-019-02582-wMathSciNetCrossRef

Azmi, M., Kolahchi, R., Bidgoli, M.R.: Dynamic analysis of concrete column reinforced with \(\text{ SiO }_{2}\) nanoparticles subjected to blast load. Adv. Concrete Const. 7, 51–63 (2019). https://doi.org/10.12989/acc.2019.7.1.051CrossRef

10.

Keshtegar, B., Jamali, M., Kolahchi, R., Trung, N.T.: Application of differential cubature method for nonlocal vibration, buckling and bending response of annular nanoplates integrated by piezoelectric layers based on surface-higher order nonlocal-piezoelasticity theory. J. Comput. Appl. Math. 369, 112625 (2020). https://doi.org/10.1016/j.cam.2019.112625MathSciNetCrossRefMATH

11.

Hajmohammad, M.H., Kolahchi, R., Zarei, M.S., Nouri, A.H.: Dynamic response of auxetic honeycomb plates integrated with agglomerated CNT-reinforced face sheets subjected to blast load based on visco-sinusoidal theory. Int. J. Mech. Sci. 153–154, 391–401 (2019). https://doi.org/10.1016/j.ijmecsci.2019.02.008CrossRef

12.

Kolahchi, R., Zhu, S.P., Keshtegar, B., Trung, N.T.: Dynamic buckling optimization of laminated aircraft conical shells with hybrid nanocomposite martial. Aerosp. Sci. Tech. 98, 105656 (2020). https://doi.org/10.1016/j.ast.2019.105656CrossRef

13.

Arbabi, A., Kolahchi, R., Bidgoli, M.R.: Experimental study for ZnO nanofibers effect on the smart and mechanical properties of concrete. Smart Struct. Syst. 25, 97–104 (2020). https://doi.org/10.12989/sss.2020.25.1.097CrossRef

14.

Motezaker, M., Kolahchi, R.: Seismic response of concrete columns with nanofiber reinforced polymer layer. Comput. Concrete 20, 361–368 (2017). https://doi.org/10.12989/cac.2017.20.3.361CrossRef

15.

Motezaker, M., Kolahchi, R.: Seismic response of \(\text{ SiO }_{\rm 2 }\) nanoparticles-reinforced concrete pipes based on DQ and newmark methods. Comput. Concrete 19, 745–753 (2017). https://doi.org/10.12989/cac.2017.19.6.745CrossRef

16.

Chen, L.W., Doong, J.L.: Large amplitude vibration of an initially stressed moderately thick plate. J. Sound Vib. 89, 499–508 (1983). https://doi.org/10.1016/0022-460X(83)90351-6CrossRefMATH

17.

Wang, Z.X., Shen, H.S.: Nonlinear vibration of nanotube-reinforced composite plates in thermal environments. Comput. Mater. Sci. 50, 2319–2330 (2011). https://doi.org/10.1016/j.commatsci.2011.03.005CrossRef

18.

Zhang, S., Zhou, J., Wang, Q., Chen, X., Kawazoe, Y., Jena, P.: Penta-graphene: a new carbon allotrope. Proc. Natl. Acad. Sci. USA 112, 2372–2377 (2015). https://doi.org/10.1073/pnas.1416591112CrossRef

19.

Sun, H., Mukherjee, S., Singh, C.V.: Mechanical properties of monolayer penta-graphene and phagraphene: a first-principles study. Phys. Chem. Chem. Phys. 18, 26736–26742 (2016). https://doi.org/10.1039/c6cp04595bCrossRef

20.

Naseri, M.: Investigation on the stability and electronic properties of Penta-XP5 (\(\text{ X }=\text{ Al, } \text{ Ga, } \text{ In } \)) monolayer semiconductors by using first principles calculations. Chem. Phys. Lett. 706, 99–106 (2018). https://doi.org/10.1016/j.cplett.2018.05.067CrossRef

21.

Dai, X.S., Shen, T., Feng, Y., Liu, H.C.: Structure, electronic and optical properties of Al, Si, P doped penta-graphene: a first-principles study. Phys. B Condens. Matter. 574, 411660 (2019). https://doi.org/10.1016/j.physb.2019.411660CrossRef

22.

Chen, D., Zhang, X., Tang, J., Cui, H., Chen, Z., Li, Y.: Different doping of penta-graphene as adsorbent and gas sensing material for scavenging and detecting SF6 decomposed species. Sustain. Mater. Technol. (2019). https://doi.org/10.1016/j.susmat.2019.e00100CrossRef

23.

Berdiyorov, G.R., Dixit, G., Madjet, M.E.: Band gap engineering in penta-graphene by substitutional doping: first-principles calculations. J. Phys. Condens. Matter. 28, 475001 (2016). https://doi.org/10.1088/0953-8984/28/47/475001CrossRef

24.

Tien, N.T., Thao, P.T.B., Phuc, V.T., Ahuja, R.: Electronic and transport features of sawtooth penta-graphene nanoribbons via substitutional doping. Phys. E Low Dimens. Syst. Nanostruct. 114, 113572 (2019). https://doi.org/10.1016/j.physe.2019.113572CrossRef

25.

Tu, W., Wang, K., Qin, L., Sun, Z., Chen, J.: Intrinsic mechanical properties and fracture mechanism of monolayer penta-graphene investigated by nanoindentation: a molecular dynamics study. Comput. Mater. Sci. 169, 109145 (2019). https://doi.org/10.1016/j.commatsci.2019.109145CrossRef

26.

Han, T., Cao, S., Wang, X., Xue, Z., Zhang, X.: Mechanical behaviours of penta-graphene and effects of hydrogenation. Mater. Res. Express. (2019). https://doi.org/10.1088/2053-1591/ab1daeCrossRef

27.

Duc, N.D., Lam, P.T., Quan, T.Q., Quang, P.M., Van Quyen, N.: Nonlinear post-buckling and vibration of 2D penta-graphene composite plates. Acta Mech. (2019). https://doi.org/10.1007/s00707-019-02546-0CrossRefMATH

28.

Ferrari, R., Froio, D., Rizzi, E., Gentile, C., Chatzi, E.N.: Model updating of a historic concrete bridge by sensitivity- and global optimization-based latin hypercube sampling. Eng. Struct. 179, 139–160 (2019). https://doi.org/10.1016/j.engstruct.2018.08.004CrossRef

29.

Bartoli, N., Lefebvre, T., Dubreuil, S., Olivanti, R., Priem, R., Bons, N., Martins, J.R.R.A., Morlier, J.: Adaptive modeling strategy for constrained global optimization with application to aerodynamic wing design. Aerosp. Sci. Technol. 90, 85–102 (2019). https://doi.org/10.1016/j.ast.2019.03.041CrossRef

30.

Ameri, E., Aghdam, M.M., Shakeri, M.: Global optimization of laminated cylindrical panels based on fundamental natural frequency. Compos. Struct. 94, 2697–2705 (2012). https://doi.org/10.1016/j.compstruct.2012.04.005CrossRef

31.

Xing, J., Luo, Y., Zhan, J., Kang, Z.: Global shape optimization of fixtures to suppress wrinkles in large-displacement membrane structures. Int. J. Solids Struct. 144–145, 301–312 (2018). https://doi.org/10.1016/j.ijsolstr.2018.05.016CrossRef

32.

Pham, D.T., Castellani, M.: The bees algorithm: modelling foraging behaviour to solve continuous optimization problems. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 223, 2919–2938 (2009). https://doi.org/10.1243/09544062JMES1494CrossRef

33.

Dat, N.D., Anh, V.M., Quan, T.Q., Duc, P.T., Duc, N.D.: Nonlinear stability and optimization of thin nanocomposite multilayer organic solar cell using Bees algorithm. Thin Walled Struct. (2019). https://doi.org/10.1016/j.tws.2019.106520CrossRef

34.

Pham, D.T., Castellani, M.: A comparative study of the Bees algorithm as a tool for function optimisation. Cogent Eng. 2, 1–28 (2015). https://doi.org/10.1080/23311916.2015.1091540CrossRef

35.

Pham, D.T., Castellani, M.: Benchmarking and comparison of nature-inspired population-based continuous optimisation algorithms. Soft Comput. 18, 871–903 (2014). https://doi.org/10.1007/s00500-013-1104-9CrossRef

36.

Baronti, L., Zhang, B., Castellani, M., Pham, D.T.: Machine learning of electro-hydraulic motor dynamics. SN Appl. Sci. (2020). https://doi.org/10.1007/s42452-019-1889-yCrossRef

37.

Giannozzi, P., Baroni, S., Bonini, N., Calandra, M., Car, R., Cavazzoni, C., Ceresoli, D., Chiarotti, G.L., Cococcioni, M., Dabo, I., Dal Corso, A., De Gironcoli, S., Fabris, S., Fratesi, G., Gebauer, R., Gerstmann, U., Gougoussis, C., Kokalj, A., Lazzeri, M., Martin-Samos, L., Marzari, N., Mauri, F., Mazzarello, R., Paolini, S., Pasquarello, A., Paulatto, L., Sbraccia, C., Scandolo, S., Sclauzero, G., Seitsonen, A.P., Smogunov, A., Umari, P., Wentzcovitch, R.M.: QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials. J. Phys. Condens. Matter. (2009). https://doi.org/10.1088/0953-8984/21/39/395502CrossRef

38.

Giannozzi, P., Andreussi, O., Brumme, T., Bunau, O., Buongiorno Nardelli, M., Calandra, M., et al.: Advanced capabilities for materials modelling with Quantum ESPRESSO. J. Phys. Condens. Matter. (2017). https://doi.org/10.1088/1361-648x/aa8f79CrossRef

39.

Perdew, J.P., Burke, K., Ernzerhof, M.: Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996). https://doi.org/10.1103/PhysRevLett.77.3865CrossRef

40.

Grimme, S.: Semiempirical GGA-type density functional constructed with a long-range dispersion correction. J. Comput. Chem. 27, 1787–1799 (2006). https://doi.org/10.1002/jcc.20495CrossRef

41.

De Jong, M., Chen, W., Angsten, T., Jain, A., Notestine, R., Gamst, A., Sluiter, M., Ande, C.K., Van Der Zwaag, S., Plata, J.J., Toher, C., Curtarolo, S., Ceder, G., Persson, K.A., Asta, M.: Charting the complete elastic properties of inorganic crystalline compounds. Sci. Data. 2, 1–13 (2015). https://doi.org/10.1038/sdata.2015.9CrossRef

42.

Reddy, J.N.: Mechanics of Laminated Composite Plates and Shells: Theory and Analysis. CRC Press, Boca Raton (2004)CrossRef

43.

Brush, D.D., Almroth, B.O.: Buckling of Bars, Plates and Shells. Mc. Graw-Hill, New York City (1975)CrossRef

44.

Dawe, D.J., Horsington, R.W., Kamtekar, A.G., Little, G.H.: Aspects of the Analysis of Plate Structures. Clarendon Press, Oxford (1985)MATH

Title: A first-principle study of nonlinear large amplitude vibration and global optimization of 3D penta-graphene plates based on the Bees Algorithm
Authors: Ngo Dinh Dat
Tran Quoc Quan
Phuong Tran
Pham Tien Lam
Nguyen Dinh Duc
Publication date: 30-06-2020
Publisher: Springer Vienna
Published in: Acta Mechanica / Issue 9/2020
Print ISSN: 0001-5970
Electronic ISSN: 1619-6937
DOI: https://doi.org/10.1007/s00707-020-02706-7

Springer Professional

A first-principle study of nonlinear large amplitude vibration and global optimization of 3D penta-graphene plates based on the Bees Algorithm

Abstract

Premium Partners

Springer Professional

Abstract

Please log in to get access to your license.

Other articles of this Issue 9/2020

A total Lagrangian Timoshenko beam formulation for geometrically nonlinear isogeometric analysis of spatial beam structures

Robust optimum design of a tuned mass damper inerter

Mechanics of kerf patterns for creating freeform structures

The effect of bend angle on pressure drop and flow behavior in a corrugated duct

Inflation, extension and torsion analysis of compressible functionally graded hyperelastic tubes

Stability of nanobeams under nonconservative surface loading

Premium Partners