Top

Journal of Materials Engineering and Performance

Published in:

03-06-2022 | Technical Article

A New Dominance Distribution Method to Select Materials with Higher Fatigue Resistance under Property Scatter and Load Uncertainty

Authors: X. Bai, P. Zhang, Q. Wang, R. Liu, Z. J. Zhang, Q. Q. Duan, E. N. Yang, H. Bo, Z. F. Zhang

Published in: Journal of Materials Engineering and Performance | Issue 12/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The fatigue properties of materials are dispersive and vary with service loads. Few methods can be used to guide the selection of materials in anti-fatigue design. In this study, for the first time, a new dominance distribution method to select the materials with higher fatigue resistance is proposed by the quantification of the scatter of fatigue lives and strengths and the simulation of possible load histories; accordingly, two kinds of diagrams are developed to display the dominance distributions of longer fatigue lives for the materials bearing cyclic constant and variable amplitude loads. After the fatigue tests of two Al-Si casting alloys, the dominance distribution method was used for their comparisons. The results indicate that the dominance distributions can clearly display the longer fatigue lives of the materials under different possible loading distributions and different reliability design index, and the dominance distribution diagrams can facilitate engineers to quickly select the materials with higher fatigue resistance.

previous article High-Temperature Deformation Constitutive Model of Zircaloy-4 Based on the Support Vector Regression Algorithm during Hot Rolling

next article Neural Network Modeling of NiTiHf Shape Memory Alloy Transformation Temperatures

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

J. Schijve, Fatigue of Structures and Materials, Springer, New York, 2001.

Z.F. Zhang, L. Li, Z.J. Zhang, and P. Zhang, Twin Boundary: Controllable Interface to Fatigue Cracking, J. Mater. Sci. Technol., 2017, 33(7), p 603–606. CrossRef

L. Chen, D. Zeng, Z. Liu, S. Bai, and J. Li, Improving the Fatigue Crack Propagation Resistance and Damage Tolerance of 2524–T3 Alloy with Amorphous Electroless Ni-P Coating, J. Mater. Eng. Perform., 2018, 27(2), p 881–888. CrossRef

M.K.T. Srivatsan, V. Vasudevan, D. Tammana, and B. Poorganji, Influence of Cyclic Straining on Fatigue, Deformation, and Fracture Behavior of High-Strength Alloy Steel, J. Mater. Eng. Perform., 2015, 25, p 138–150.

K. Gillner, M. Henrich, and S. Münstermann, Numerical Study of Inclusion Parameters and Their Influence on Fatigue Lifetime, Int. J. Fatigue, 2018, 111, p 70–80. CrossRef

H.W. Fu, B. Doenges, U. Krupp, U. Pietsch, C.P. Fritzen, X.B. Yun, and H.J. Christ, Microcrack Initiation Mechanism of a Duplex Stainless Steel Under Very High Cycle Fatigue Loading Condition: the Significance of Load Partitioning, and Micro Residual Stresses, Acta Mater., 2020, 199, p 278–287. CrossRef

W. Jiang, P. Li, W.X. Yao, S.S. Rui, H.J. Shi, and J. Huang, The Effect of Porosity Size on the High Cycle Fatigue Life of Nickel-Based Single Crystal Super Alloy at 980 °C, Int. J. Fatigue, 2021, 147, p 106191. CrossRef

S. Picak, T. Wegener, S.V. Sajadifar, C. Sobrero, J. Richter, H. Kim, T. Niendorf, and I. Karaman, On The Low-Cycle Fatigue Response of CoCrNiFeMn High Entropy Alloy with Ultra-Fine Grain Structure, Acta Mater., 2021, 205, p 116540. CrossRef

Y. Furuya, A New Model for Predicting the Gigacycle Fatigue Strength of High-Strength Steels, Mater. Sci. Eng. A, 2019, 743, p 445–452. CrossRef

10.

H.R. Ammar, A.M. Samuel, and F.H. Samuel, Effects of Surface Porosity on the Fatigue Strength of AE425 and PM390 Hypereutectic Al-Si Casting Alloys at Medium and Elevated Temperatures, Mater. Sci. Eng. A, 2008, 473(1), p 58–64. CrossRef

11.

H. Ito, Y. Suzuki, H. Nishikawa, M. Kinefuchi, M. Enoki, and K. Shibanuma, Multiscale Model Prediction of Ferritic Steel Fatigue Strength Based on Microstructural Information, Tensile Properties, and Loading Conditions (No Adjustable Material Constants), Int. J. Mech. Sci., 2020, 170, p 105339. CrossRef

12.

E. Haibach, Analytical Strength Assessment of Components in Mechanical Engineering: FKM-Guideline, 6th ed. VDMA, Karnataka, 2012.

13.

DVS 1608, Design and Strength Assessment of Welded Structures from Aluminium Alloys in Railway Applications. (2011)

14.

DVS 1612, Design and Endurance Strength Evaluation for Welded Steel Joints in Railway Vehicle Construction. (2009)

15.

Z.Y. Ma, X.X. Wang, H.F. Chen, F.Z. Xuan, and Y.H. Liu, A Unified Direct Method for Ratchet and Fatigue Analysis of Structures Subjected to Arbitrary Cyclic Thermal-Mechanical Load Histories, Int. J. Mech. Sci., 2021, 194, p 106190. CrossRef

16.

BS EN 1993-1-9, Eurocode 3: Design of Steel Structures - Part 1-9: Fatigue. (2005)

17.

BS EN 1999-1-3, Eurocode 9: Design of Aluminium Structures - Part 1-3: Structures Susceptible to Fatigue, British. (2007)

18.

MIL-HDBK-17, USA Department of Defense Handbook - Composite Materials Handbook. (2012)

19.

J.A. Cassiday, Failure of Materials in Mechanical Design, 2nd ed. Wiley, New Jersey, 1981.

20.

V.S. Petinov, In-Service Fatigue Reliability of Structures, Springer, Cham, 2018.CrossRef

21.

L.Y. Xie, N.X. Wu, and W.X. Qian, Time Domain Series System Definition and Gear Set Reliability Modeling, Reliab. Eng. Syst. Saf., 2016, 155, p 97–104. CrossRef

22.

S.P. Zhu, H.Z. Huang, Y. Li, Y. Liu, and Y. Yang, Probabilistic Modeling of Damage Accumulation for Time-Dependent Fatigue Reliability Analysis of Railway Axle Steels, Proc. Inst. Mech. Eng. Part F J. Rail Rapid Transit, 2015, 229(1), p 23–33. CrossRef

23.

S.P. Zhu, Q. Liu, J. Zhou, and Z.Y. Yu, Fatigue Reliability Assessment of Turbine Discs Under Multi-Source Uncertainties, Fatigue Fract. Eng. Mater. Struct., 2018, 41(6), p 1291–1305. CrossRef

24.

D. Liao, S.P. Zhu, B. Keshtegar, G. Qian, and Q. Wang, Probabilistic Framework for Fatigue Life Assessment of Notched Components Under Size Effects, Int. J. Mech. Sci., 2020, 181, p 105685. CrossRef

25.

X.P. Niu, S.P. Zhu, J.C. He, Y. Ai, K. Shi, and L. Zhang, Fatigue Reliability Design and Assessment of Reactor Pressure Vessel Structures: Concepts and Validation, Int. J. Fatigue, 2021, 153, p 106524. CrossRef

26.

B.F. Zhao, L.Y. Xie, L. Wang, Z.Y. Hu, S. Zhou, and X. Bai, A New Multiaxial Fatigue Life Prediction Model for Aircraft Aluminum Alloy, Int. J. Fatigue, 2021, 143, p 105993. CrossRef

27.

X. Bai, P. Zhang, Z.J. Zhang, R. Liu, and Z.F. Zhang, New Method for Determining P-S-N Curves in Terms of Equivalent Fatigue Lives, Fatigue Fract. Eng. Mater. Struct., 2019, 42(10), p 2340–2353. CrossRef

28.

ISO 12107, Metallic Materials-Fatigue Testing-Statistical Planning and Analysis of Data, ISO. (2003)

29.

M. Wang, J.C. Pang, H.Q. Liu, S.X. Li, and Z.F. Zhang, Influence of Microstructures on the Tensile and Low-Cycle Fatigue Damage Behaviors of Cast Al12Si4Cu3NiMg Alloy, Mater. Sci. Eng. A, 2019, 759, p 797–803. CrossRef

30.

H.Q. Liu, J.C. Pang, M. Wang, S.X. Li, and Z.F. Zhang, The Effect of Thermal Exposure on the Microstructure and Mechanical Properties of Multiphase AlSi12Cu4MgNi2 Alloy, Mater. Charact., 2020, 159, p 110032–110032. CrossRef

31.

Y.K. Zhu, Q.Y. Chen, Q. Wang, H.Y. Yu, R. Li, J.P. Hou, Z.J. Zhang, G.P. Zhang, and Z.F. Zhang, Effect of Stress Profile on Microstructure Evolution of Cold-Drawn Commercially Pure Aluminum Wire Analyzed by Finite Element Simulation, J. Mater. Sci. Technol., 2018, 34(7), p 1214–1221. CrossRef

32.

M.Z. Wu, J.W. Zhang, Y.B. Zhang, and H.Q. Wang, Effects of Mg Content on the Fatigue Strength and Fracture Behavior of Al-Si-Mg Casting Alloys, J. Mater. Eng. Perform., 2018, 27, p 5992–6003. CrossRef

33.

C. Ye, C. Zhang, J. Zhao, and Y. Dong, Effects of Post-Processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review, J. Mater. Eng. Perform., 2021, 30, p 6407–6425. CrossRef

34.

P. Strzelecki, and T. Tomaszewski, Application of Weibull distribution to describe S-N curve with using small number specimens, AIP Conference Proceedings, Vol 1780, AIP Publishing LLC, New York, 2016, p 020007

35.

L. Jing, and J. Pan, A Maximum Likelihood Method for Estimating P-S-N Curves, Int. J. Fatigue, 1997, 19(5), p 415–419. CrossRef

36.

N. Theodore, High Cycle Fatigue: A Mechanics of Materials Perspective, Elsevier, Netherlands, 2006.

37.

J.J. Xiong, and R.A. Shenoi, Fatigue and Fracture Reliability Engineering, Springer, New York, 2011.CrossRef

38.

M. Rieger, C. Moser, P. Brunnhofer, D. Simunek, F.J. Weber, A. Deisl, H.P. Gänser, R. Pippan, and N. Enzinger, Fatigue Crack Growth In Full-Scale Railway Axles – Influence of Secondary Stresses and Load Sequence Effects, Int. J. Fatigue, 2020, 132, p 105360. CrossRef

39.

L. Náhlík, P. Pokorný, M. Ševčík, R. Fajkoš, P. Matušek, and P. Hutař, Fatigue Lifetime Estimation of Railway Axles, Eng. Fail. Anal., 2017, 73, p 139–157. CrossRef

40.

S. Konuma, and S. Ichikawa, Design and Evaluation of Hardware Pseudo-Random Number Generator MT19937, IEICE Trans. Inf. Syst., 2005, 88D, p 2876–2879. CrossRef

41.

M. Matsumoto, and T. Nishimura, Mersenne Twister: A 623-Dimensionally Equidistributed Uniform Pseudo-Random Number Generator, ACM Trans. Model. Comput. Simul., 1998, 8(1), p 3–30. CrossRef

42.

G. Kten, and G. Ahmet, Generating Low-Discrepancy Sequences from the Normal Distribution: Box-Muller or Inverse Transform, Math. Comput. Model., 2011, 53(5–6), p 1268–1281.

Title: A New Dominance Distribution Method to Select Materials with Higher Fatigue Resistance under Property Scatter and Load Uncertainty
Authors: X. Bai
P. Zhang
Q. Wang
R. Liu
Z. J. Zhang
Q. Q. Duan
E. N. Yang
H. Bo
Z. F. Zhang
Publication date: 03-06-2022
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 12/2022
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07031-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 12/2022

Studies on Microstructure Evolution, Mechanical, and Corrosion Behaviors of Cryorolled 316L Steel

Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer

Optimization of Welding Parameters During Ti-TA2/5A06Al Dissimilar Double-Sided Cold Arc Metal Inert Gas Welding

Effect of Annealing Before Aging on Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy

Analyzing the Influence of Simultaneously Austenitization and Multi-Directional Boriding on the Surface and Subsurface of H13 Tool Steel

Different Effects of Body-Centered Cubic and Face-Centered Cubic Chromium Precipitations on Mechanical Properties and Wear Resistance of Cu-Cr-Zr Alloy

Premium Partners