Top

Microsystem Technologies

Published in:

05-03-2018 | Technical Paper

A novel flexible heating element using graphene polymeric composite ink on polyimide film

Authors: Kun-Cheng Ke, Cih Cheng, Li-Jian Lin, Sen-Yeu Yang

Published in: Microsystem Technologies | Issue 8/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this study, a simple, large and flexible electronic heat generator with graphene polymeric composite ink on a polyimide film was fabricated. A 47-μm thin layer was fabricated using wire bar coating. The dispersion of graphene, electrical properties, flexibility, sheet resistance and temperature increase of the layer were studied. Uniform resistance and graphene dispersion were determined to be the keys to uniform heating. This study demonstrated the feasibility of flexible rapid heating elements with graphene polymer composites.

previous article Design and fabrication of screen printed microheater

next article Low-cost surface micromachined microhotplates for chemiresistive gas sensors

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Abdullah SI, Ansari MNM (2015) Mechanical properties of graphene oxide (GO)/epoxy composites. HBRC J 11:151–156. https://doi.org/10.1016/j.hbrcj.2014.06.001 CrossRef

Bae JJ, Lim SC, Han GH et al (2012) Heat dissipation of transparent graphene defoggers. Adv Funct Mater 22:4819–4826. https://doi.org/10.1002/adfm.201201155 CrossRef

Chang J-H, Yang S-Y (2005) Development of fluid-based heating and pressing systems for micro hot embossing. Microsyst Technol 11:396–403. https://doi.org/10.1007/s00542-004-0481-5 CrossRef

Chen C-H, Lee Y-C, Chen C-D, et al (2008) Roller imprinting based on focus infrared heating. In: 2008 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems. pp 877–880

de Abajo J, de la Campa JG (1999) Processable aromatic polyimides. Progress in polyimide chemistry I. Springer, Berlin, pp 23–59CrossRef

Ederth J, Johnsson P, Niklasson GA et al (2003) Electrical and optical properties of thin films consisting of tin-doped indium oxide nanoparticles. Phys Rev B 68:155410. https://doi.org/10.1103/PhysRevB.68.155410 CrossRef

Huang X, Qi X, Boey F, Zhang H (2012) Graphene-based composites. Chem Soc Rev 41:666–686. https://doi.org/10.1039/C1CS15078B CrossRef

Marinho B, Ghislandi M, Tkalya E et al (2012) Electrical conductivity of compacts of graphene, multi-wall carbon nanotubes, carbon black, and graphite powder. Powder Technol 221:351–358. https://doi.org/10.1016/j.powtec.2012.01.024 CrossRef

McKeen LW (2017) 7—Polyimides. In: Permeability properties of plastics and elastomers (Fourth Edition). William Andrew Publishing, pp 115–127

Ogura R, Shimizu T, Shiratori T, Yang M (2017) Development of a novel resistance heating system for microforming by modifying surface of dies. Procedia Eng 207:1016–1021. https://doi.org/10.1016/j.proeng.2017.10.1123 CrossRef

Papageorgiou DG, Kinloch IA, Young RJ (2017) Mechanical properties of graphene and graphene-based nanocomposites. Prog Mater Sci 90:75–127. https://doi.org/10.1016/j.pmatsci.2017.07.004 CrossRef

Park SK, Han JI, Kim WK, Kwak MG (2001) Deposition of indium–tin-oxide films on polymer substrates for application in plastic-based flat panel displays. Thin Solid Films 397:49–55. https://doi.org/10.1016/S0040-6090(01)01489-4 CrossRef

Quiñones R, Brown RT, Searls N, Richards-Waugh L (2018) Study of polymorphism using patterned self-assembled monolayers approach on metal substrates. Appl Surf Sci 427:97–105. https://doi.org/10.1016/j.apsusc.2017.08.164 CrossRef

Raji A-RO, Varadhachary T, Nan K et al (2016a) Composites of Graphene Nanoribbon Stacks and Epoxy for Joule Heating and Deicing of Surfaces. ACS Appl Mater Interfaces 8:3551–3556CrossRef

Raji A-RO, Varadhachary T, Nan K et al (2016b) Composites of graphene nanoribbon stacks and epoxy for joule heating and deicing of surfaces. ACS Appl Mater Interfaces 8:3551–3556. https://doi.org/10.1021/acsami.5b11131 CrossRef

Shih Y-M, Kao C-C, Ke K-C, Yang S-Y (2017) Imprinting of double-sided microstructures with rapid induction heating and gas-assisted pressuring. J Micromechanics Microengineering 27:095012. https://doi.org/10.1088/1361-6439/aa7acd CrossRef

Smits FM (1958) Measurement of sheet resistivities with the four-point probe. Bell Syst Tech J 37:711–718. https://doi.org/10.1002/j.1538-7305.1958.tb03883.x CrossRef

Sui D, Huang Y, Huang L et al (2011) Flexible and transparent electrothermal film heaters based on graphene materials. Small 7:3186–3192CrossRef

Tan L, Zeng M, Wu Q et al (2015) Direct Growth of Ultrafast Transparent Single-Layer Graphene Defoggers. Small 11:1840–1846. https://doi.org/10.1002/smll.201402427 CrossRef

Vert R, Carles P, Laborde E et al (2012) Adhesion of ceramic coating on thin and smooth metal substrate: a novel approach with a nanostructured ceramic interlayer. J Therm Spray Technol 21:1128–1134. https://doi.org/10.1007/s11666-012-9798-2 CrossRef

Yaralioglu G (2011) Ultrasonic heating and temperature measurement in microfluidic channels. Sens Actuators Phys 170:1–7. https://doi.org/10.1016/j.sna.2011.05.012 CrossRef

Zhang Q, Yu Y, Yang K et al (2017) Mechanically robust and electrically conductive graphene-paper/glass-fibers/epoxy composites for stimuli-responsive sensors and Joule heating deicers. Carbon 124:296–307. https://doi.org/10.1016/j.carbon.2017.09.001 CrossRef

Title: A novel flexible heating element using graphene polymeric composite ink on polyimide film
Authors: Kun-Cheng Ke
Cih Cheng
Li-Jian Lin
Sen-Yeu Yang
Publication date: 05-03-2018
Publisher: Springer Berlin Heidelberg
Published in: Microsystem Technologies / Issue 8/2018
Print ISSN: 0946-7076
Electronic ISSN: 1432-1858
DOI: https://doi.org/10.1007/s00542-018-3824-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2018

In-line inspection of surface feature and defect

Enhancement of front-to-back ratio and gain of rectangular microstrip antenna using novel elliptical EBG structure

Design and analysis of a novel MEMS spiral inductor with high quality factor

Performance evaluation of a curved electrode actuator fabricated without gold/chromium conductive layers

Characteristics of microring circuit using plasmonic island driven electron mobility

Effect of rotation and gravity on the reflection of P-waves from thermo-magneto-microstretch medium in the context of three phase lag model with initial stress