A Novel Method for Design and Implementation of Systolic Associative Cascaded Variable Leaky Least Mean Square Adaptive Filter for Denoising of ECG Signals

Electrocardiogram is the most essential diagnostic test for heart disease detection in this era, where it has low frequency and small amplitude, making it vulnerable to a variety of stimuli, including high/low-frequency noises resulting in diagnostic quality suffers. Implementation of adaptive filter removes noise from the signal in a better way. Adaptive filters in signal processing plays a major role in biomedical applications for denoising different types of noises such as Power Line Interference noise which is generated by the power line electromagnetic field and it exhibits its peak from 50 to 60 Hz, Baseline Wander noise which occurs due to the variation of electrode skin impedance, Motion Artifacts which is generated by the electrode motions away from the contact zone on the skins and Muscle Noise, this is due to the Electromyographic signals, originating from the skeletal muscle contractions. In order to eliminate the above-mentioned noises, the most common adaptive filters such as Least Mean Square (LMS) and Recursive Least Squares (RLS) are used. In existing method, they used Cascaded Least Mean Square adaptive filters to reduce noises at a much higher rate than the Least Mean Square Adaptive filter and to achieve the higher Signal to Noise Ratio (SNR). The Cascaded RLS filter can be used to obtain faster range of convergence than the Cascaded LMS. The filter is designed with adaptive variable step size which calculates the step size according to the input signal of the filter, this is used to increase the stability of the filter. The systolic architecture and associativity of the VLLMS filter is implemented to reduce the number of adders and multipliers along the critical path of the filter. This work comprises of designing the 4 tap, 8 tap and 16 tap cascaded systolic associative variable leaky least mean square adaptive filters using Simulink and the SNR comparisons have been made between normal LMS cascaded filter and cascaded VLLMS filter. The area and delay between normal filter and systolic associative filter are compared by converting the Simulink design into Verilog and by implementing in Xilinx.