Top

Published in:

2018 | OriginalPaper | Chapter

A Preliminary Methodological Approach to Models for Manufacturing (MfM)

Authors : Fernando Mas, Jesus Racero, Manuel Oliva, Domingo Morales-Palma

Published in: Product Lifecycle Management to Support Industry 4.0

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

To enhance multidisciplinary design and simulation of complex systems, MBSE (Model Based Systems Engineering) is a methodology where computer aided graphical modeling authoring tools are used to specify functions and behaviors of the systems. Simulation tools bring about a system behavioral abstraction required for the design of complex products. MBSE enables more robust systems engineering, because it results in models and their associated behavioral abstraction [1].

A research approach for modelling manufacturing systems in the aerospace industry, and in particular for FAL (Final Assembly Line), has been proposed by the authors in several research papers during the last years [2, 3]. Functional and data models have been published and deployed using data structures available from commercial PLM systems [4].

Recently a new approach for modelling manufacturing systems has been coined as an extension of the previous research to introduce MBSE in manufacturing. A new architecture based on 3-Layers Model (3LM) has been defined: a Data layer, an Ontology layer and a Service layer. Ontology layer is the core of the 3LM. The Ontology layer defines: Scope model, Data model, Behavior model and Semantic model, to further instance information from databases. Scope model is mandatory because manufacturing is a large and wide part of the artifact lifecycle and Data model can cover different several uses across it.

This paper presents a preliminary methodology for Models for Manufacturing (MfM) trends and issues that can be addressed in order to support the generation and management of manufacturing ontologies.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Towards Cloud Based Collaborative Design – Analysis in Digital PLM Environment

next chapter A Preliminary Study of Models for Manufacturing (MfM) Applied to Incremental Sheet Forming

Holland, O.T.: Model-based systems engineering. In: Loper, M.L. (ed.) Modeling and Simulation in the Systems Engineering Life Cycle. SFMA, pp. 299–306. Springer, London (2015). https://doi.org/10.1007/978-1-4471-5634-5_23CrossRef

Mas, F., Rios, J., Menendez, J.L., Gomez, A.: A process-oriented approach to modeling the conceptual design of aircraft assembly lines. Int. J. Adv. Manuf. Technol. 67(1–4), 771–784 (2013). https://doi.org/10.1007/s00170-012-4521-5CrossRef

Mas, F., Oliva, M., Rios, J., Gomez, A., Olmos, V., et al.: PLM based approach to the industrialization of aeronautical assemblies. Procedia Eng. 132, 1045–1052 (2015). https://doi.org/10.1016/j.proeng.2015.12.594CrossRef

Gómez, A., Rios, J., Mas, F., Vizan, A.: Method and software application to assist in the conceptual design of aircraft final assembly lines. J. Manuf. Syst. 40, 37–53 (2016). https://doi.org/10.1016/j.jmsy.2016.04.002CrossRef

Friedenthal, S., Griego, R., Sampson, M.: INCOSE model based systems engineering (MBSE) initiative. In: INCOSE International Symposium (2007)

Dickerson, C.E., Mavris, D.: A brief history of models and model based systems engineering and the case for relational orientation. IEEE Syst. J. 7(4), 581–592 (2013)CrossRef

D’Ambrosio, J., Soremekun, G.: Systems engineering challenges and MBSE opportunities for automotive system design. In: 2017, IEEE International Conference on Systems and Cybernetics, Banff, AB, pp. 2075–2080 (2017)

Frechette, S.: Model based enterprise for manufacturing. In: 2011, 44th CIRP International Conference on Manufacturing Systems, Madison, WI, United States (2011)

Ivezic, N., Kulvatunyou, B., Brandl, D., Cho, H., Yan, L., et al.: Drilling down on Smart Manufacturing – enabling composable apps. Manuf. Lett. 08, 10 (2016)

10.

Ivezic, N., Kulvatunyou, B., Lu, Y., Lee, Y., Lee, J., et al.: OAGi/NIST Workshop on Open Cloud Architecture for Smart Manufacturing. Report number: NISTIR 8124

11.

Ríos, J., Hernández, J.C., Oliva, M., Mas, F.: Product avatar as digital counterpart of a physical individual product: literature review and implications in an aircraft. In: 22nd International Conference on Concurrent Engineering, vol. 2, pp. 657–666. IOS Press. https://doi.org/10.3233/978-1-61499-544-9-657

12.

Bergenthal, J.: Final Report Model Based Engineering (MBE) Subcommittee. NDIA Systems Engineering Division, M&S Committee (2011). https://www.ndia.org/-/media/sites/ndia/meetings-and-events/3187-sullivan/divisions/systems-engineering/modeling-and-simulation/reports/model-based-engineering.ashx. Accessed Mar 2018

13.

European Commission: Aeronautics and Air Transport: Beyond Vision 2020 (Towards 2050). Official Publications of the European Communities, 2010, Luxembourg. http://bookshop.europa.eu. Accessed Mar 2018

14.

Mas, F., Menendez, J.L., Oliva, M., Rios, J., Gomez, A., et al.: iDMU as the Collaborative Engineering engine: research experiences in Airbus. In: International Conference on Engineering, Technology and Innovation (ICE), Bergamo, pp. 1–7 (2014). https://doi.org/10.1109/ICE.2014.6871594

15.

Fiorini, S.R., Bermejo-Alonso, J., Gonçalves, P., de Freitas, E.P., Alarcos, A.O., et al.: A suite of ontologies for robotics and automation [industrial activities]. IEEE Robot. Autom. Mag. 24(1), 8–11 (2017)CrossRef

16.

Mayer, S., Hodges, J., Dan, Yu., Kritzler, M., Michahelles, F.: An open semantic framework for the industrial Internet of Things. IEEE Intell. Syst. 32(1), 96–101 (2017)CrossRef

17.

Perini, S., Arena, D., Kiritsis, D., Taisch, M.: An ontology-based model for training evaluation and skill classification in an Industry 4.0 environment. In: Lödding, H., Riedel, R., Thoben, K.-D., von Cieminski, G., Kiritsis, D. (eds.) APMS 2017. IAICT, vol. 513, pp. 314–321. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-66923-6_37CrossRef

18.

Lundgren, M., Hedlind, M., Kjellberg, T.: Model driven manufacturing process design and managing quality. Procedia CIRP 50(1), 299–304 (2016)CrossRef

19.

Uschold, M., Gruninger, M.: Ontologies: principles, methods and applications. Knowl. Eng. Rev. 11(2), 93–136 (1996)CrossRef

20.

Kiritsis, D.: Closed-loop PLM for intelligent products in the era of the Internet of Things. Comput. Aided Des. 43(5), 479–501 (2011)CrossRef

21.

Morales-Palma, D., Mas, F., Racero, J., Vallellano, C.: A preliminary study of Models for Manufacturing (MfM) applied to Incremental Sheet Forming. In: Chiabert, P., Bouras, A., Noël, F., Ríos, J. (eds.) PLM 2018. IFIP AICT, vol. 540, pp. 284–293. Springer, Cham (2018)

22.

Slimani, T.: Ontology development: a comparing study on tools, languages and formalisms. Indian J. Sci. Technol. 8(24) (2015)

23.

NIST: Integration Definition for Function Modeling (IDEF0). Computer Systems Laboratory of the National Institute of Standards and Technology, December 1993. http://www.idef.com/wp-content/uploads/2016/02/idef0.pdf. Accessed Mar 2018

24.

Cañas, A.J., et al.: Concept maps: integrating knowledge and information visualization. In: Tergan, S.-O., Keller, T. (eds.) Knowledge and Information Visualization. LNCS, vol. 3426, pp. 205–219. Springer, Heidelberg (2005). https://doi.org/10.1007/11510154_11CrossRef

25.

Arista, R., Mas, F.: A preliminary model-based approach for Gender analysis of Airbus Research Organization. In: IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), Stuttgart, pp. 1-6 (2018). https://doi.org/10.1109/ICE.2018.8436319

Title: A Preliminary Methodological Approach to Models for Manufacturing (MfM)
Authors: Fernando Mas
Jesus Racero
Manuel Oliva
Domingo Morales-Palma
Publisher: Springer International Publishing
Book: Product Lifecycle Management to Support Industry 4.0
Print ISBN: 978-3-030-01613-5

Electronic ISBN: 978-3-030-01614-2

Copyright Year: 2018
DOI: https://doi.org/10.1007/978-3-030-01614-2_25

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner