Top

Published in:

2018 | OriginalPaper | Chapter

A Review of Integrated Approaches for Material, Design and Process Selection and a Proposal for the AM Processes

Authors : Manuela Galati, Flaviana Calignano, Luca Iuliano

Published in: Product Lifecycle Management to Support Industry 4.0

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The comprehensive approach to the development of a product should analysis all of the phases, from the design to the manufacturing for the selection of a good combination of materials, designs and manufacturing processes. Due to the complexity of addressing an all-inclusive problem, the decision is usually entrusted to the manufacturing engineers for which products that have producible features easily and simple geometries are desirable, even if sacrificing the component performances. However, today, Additive Manufacturing (AM) processes offer a wide degree of design freedom that allows overcoming the traditional manufacturing limitations.

The aim of this paper is to provide a thorough review of the process selection (PS) approaches by taking into account manufacturing technologies in conjunction with the material and design performance. The paper attempts to provide as result a basic and generic methodology, which provides guidelines for the effective introduction of the AM processes in the process selection problem.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter TEAM: A Tool for Eco Additive Manufacturing to Optimize Environmental Impact in Early Design Stages

next chapter A Dynamic Contextual Change Management Application for Real Time Decision-Making Support

Anderson, D.M.: Design for Manufacturability: Optimizing Cost, Quality, and Time to Market. CIM Press, New York (2001)

O’Driscoll, M.: Design for manufacture. J. Mater. Process. Technol. 122(2), 318–321 (2002). https://doi.org/10.1016/S0924-0136(01)01132-3CrossRef

Swift, K.G., Booker, J.D.: Process selection: from design to manufacture. Butterworth-Heinemann, Oxford (2003)

Edwards, K.: Towards more strategic product design for manufacture and assembly: priorities for concurrent engineering. Mater. Des. 23(7), 651–656 (2002). https://doi.org/10.1016/S0261-3069(02)00050-XCrossRef

Kerbrat, O., Mognol, P., Hascoët, J.-Y.: A new DFM approach to combine machining and additive manufacturing. Comput. Ind. 62(7), 684–692 (2011). https://doi.org/10.1016/j.compind.2011.04.003CrossRef

Shukor, S.A., Axinte, D.: Manufacturability analysis system: issues and future trends. Int. J. Prod. Res. 47(5), 1369–1390 (2009). https://doi.org/10.1080/00207540701589398CrossRef

Gibson, I., Rosen, D.W., Stucker, B.: Design for additive manufacturing. In: Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, pp. 299–332. Springer, Boston (2010). https://doi.org/10.1007/978-1-4419-1120-9_11CrossRef

Zhou, M., Fleury, R., Shyy, Y.-K., Thomas, H., Brennan, J.: Progress in topology optimization with manufacturing constraints. In: Proceedings of the 9th AIAA MDO Conference AIAA-2002-4901 (2002)

Giachetti, R.E.: A decision support system for material and manufacturing process selection. J. Intell. Manuf. 9(3), 265–276 (1998). https://doi.org/10.1023/A:1008866732609CrossRef

10.

Yu, J.-C., Krizan, S., Ishii, K.: Computer-aided design for manufacturing process selection. J. Intell. Manuf. 4(3), 199–208 (1993). https://doi.org/10.1007/BF00123964CrossRef

11.

Galati, M., Iuliano, L.: A literature review of powder-based electron beam melting focusing on numerical simulations. Addit. Manuf. (2017) https://doi.org/10.1016/j.addma.2017.11.001

12.

Gibson, I., Rosen, D.W., Stucker, B.: Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. Springer, Boston (2010). https://doi.org/10.1007/978-1-4419-1120-9CrossRef

13.

Wohlers, T.: Additive Manufacturing State of the Industry in Wohlers Report 2014, Fort Collins, USA

14.

Das, S.: Physical aspects of process control in selective laser sintering of metals. Adv. Eng. Mater. 5(10), 701–711 (2003). https://doi.org/10.1002/adem.200310099CrossRef

15.

Larsson Morgan, L.U., Ola, H.: Rapid manufacturing with electron beam melting (EBM)—a manufacturing revolution? In: Solid Freeform Fabrication Symposium, Austin, TX (2003)

16.

Ishii, K., Adler, R., Barkan, P.: Application of design compatibility analysis to simultaneous engineering. Artif. Intell. Eng. Des. Anal. Manuf. 2(1), 53–65 (1988). https://doi.org/10.1017/S0890060400000548CrossRef

17.

Boothroyd, G.: Product design for manufacture and assembly. Comput. Aided Des. 26(7), 505–520 (1994). https://doi.org/10.1016/0010-4485(94)90082-5CrossRef

18.

Beiter, K., Krizan, S., Ishii, K., Hornberger, L.: HyperQ/Plastics: an intelligent design aid for plastic material selection. Adv. Eng. Softw. 16(1), 53–60 (1993). https://doi.org/10.1016/0965-9978(93)90029-SCrossRef

19.

Poli, C.: Design for Manufacturing: A Structured Approach, vol. 1. Butterworth-Heinemann, Boston (2001)

20.

Boothroyd, G., Dewhurst, P., Knight, W.A.: Product Design for Manufacture and Assembly. CRC Press, Boca Raton (2010)

21.

Campbell, I., Bourell, D., Gibson, I.: Additive manufacturing: rapid prototyping comes of age. Rapid Prototyp. J. 18(4), 255–258 (2012). https://doi.org/10.1108/13552541211231563CrossRef

22.

Deglin, A., Bernard, A.: A knowledge-based environment for modelling and computer-aided process planning of rapid manufacturing processes. In: Chedmail, P., Cognet, G., Fortin, C., Mascle, C., Pegna, J. (eds.) Integrated Design and Manufacturing in Mechanical Engineering, pp. 85–92. Springer, Dordrecht (2002). https://doi.org/10.1007/978-94-015-9966-5_11

23.

Wilson, J.O., Rosen, D.: Selection for rapid manufacturing under epistemic uncertainty. In: ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers (2005)

24.

Gibson, I., Rosen, D., Stucker, B.: Guidelines for process selection. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, pp. 303–327. Springer, New York (2015). https://doi.org/10.1007/978-1-4939-2113-3_13CrossRef

25.

Samperi, M.T.: Development of design guidelines for metal additive manufacturing and process selection. The Pennsylvania State University (2014)

26.

Uz Zaman, U.K., Siadat, A., Rivette, M., Baqai, A.A., Qiao, L.: Integrated product-process design to suggest appropriate manufacturing technology: a review. Int. J. Adv. Manuf. Technol., 1–22 (2017)

27.

Atzeni, E., Salmi, A.: Economics of additive manufacturing for end-usable metal parts. Int. J. Adv. Manuf. Technol. 62(9–12), 1147–1155 (2012). https://doi.org/10.1007/s00170-011-3878-1CrossRef

28.

Chiu, M.-C., Lin, Y.-H.: Simulation based method considering design for additive manufacturing and supply chain: an empirical study of lamp industry. Ind. Manag. Data Syst. 116(2), 322–348 (2016). https://doi.org/10.1108/IMDS-07-2015-0266MathSciNetCrossRef

29.

Allen, J.: An investigation into the comparative costs of additive manufacture vs. machine from solid for aero engine parts. DTIC Document (2006)

30.

Salmi, A., Calignano, F., Galati, M., Atzeni, E.: An integrated design methodology for components produced by laser powder bed fusion (L-PBF) process. Virtual Phys. Prototyp., 1–12 (2018). https://doi.org/10.1080/17452759.2018.1442229

31.

Gibson, I., Rosen, D.W., Stucker, B.: Additive Manufacturing Technologies, vol. 238. Springer, Boston (2010)

Title: A Review of Integrated Approaches for Material, Design and Process Selection and a Proposal for the AM Processes
Authors: Manuela Galati
Flaviana Calignano
Luca Iuliano
Publisher: Springer International Publishing
Book: Product Lifecycle Management to Support Industry 4.0
Print ISBN: 978-3-030-01613-5

Electronic ISBN: 978-3-030-01614-2

Copyright Year: 2018
DOI: https://doi.org/10.1007/978-3-030-01614-2_68

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner